Electrical Safety Equipment For Health And Safety Available In Norway
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The most flexible calibrator design available for laboratory or field use. Mobile venturi tube feature eliminates difficult set-up positions during calibration. Similar to F&J's Digital Air Flow Calibrator line but with a mobile venturi ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe – piezo-resistive stainless steel measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in pulverisers for coal and biomass. Specifically designed for early detection of potential fire risk in pulverizing mills in coal or biomass processes, Millwatch monitors and quickly responds to sudden carbon monoxide (CO) build-up, allowing preventative action to be taken before a hazardous ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
RT8A is a non-contact infrared thermometer for use in many low temperature applications. It helps asphalt paving or roadstone producers meet state, national and environmental quality compliance requirements and glass manufacturers meet quality compliance requirements in multiple standalone applications. Required to help manufacturers meet the increasing demands for tighter quality control ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Diameter 19 mm – ideal for deep wells. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
RC-5XL is one marine balers used for compacting waste and garbage on board. which have the indepentent pressing container for loading max 0.12CBM waste. The marine baler for 30 crews application. The automatic working makes the easy operating.there is no install request for the baler. we can sell more than 50 units per month for shipping yard and ship ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful: wide dynamic range and continuous calibration. Cost-effective: high sample throughput and fast analysis times. Versatile: also for direct solid ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Accurate and portable. F&J's line of digital air flow calibrators provide accurate, reproducible readings of flow, barometric pressure and temperature. Calibrated using NIST traceable standards. Standard accuracy is 2% and units with an accuracy of 1% are ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in coal and biomass storage ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flame AAS for the cost-effective and efficient routineanalysis of elements across a wide range of applications. The analyzer for you - high-performance AAS for routine laboratories. Cost-effective - top performance at low investment and operating costs. Simple - easy handling thanks to user-friendly concepts. Reliable - stable measuring conditions due to robust components and clever design. ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Horizontal type, Jacket structure. Chamber volume: 150L,200L, 300L, 400L. Working temperature: 105-138?. Working pressure: 0.245 Mpa. Can set multiple sterilization programs. Multiple safety ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
AMETEK Land formally announce that from the 26th November 2018 the System 4 Galvanneal Strip Thermometer (GST) will be discontinued from new product sales. Whilst the product has been stopped for new product sales the system is fully supported by our qualified field and factory service teams and our internal technical support engineers. A selected range of GST spares will remain available from ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you