Only show results in Virginia? Ok

Electrical Safety services for Health and Safety

  • Equipment Resale

    Reselling your used computer equipment to release residual value. Remarketing redundant computer equipment can release additional value back into your organisation often turning an operating cost of computer disposal into a revenue stream. Even though your computer equipment may be of no further use to you, it may still have a value within the ...

    By Piranha International Limited based in Califonia, TRINIDAD & TOBAGO.

  • Electrical Engieneering

    Electricity plays a major role in our everyday lives. Who can do without it? The same goes for industry. Without electricity, how can ore be extracted from a mine, bauxite be transformed into aluminium, or molecules be recombined to refine crude oil into consumable products? And especially, how can these be carried out while maximizing the ...

    By BBA Inc based in Mont-Saint-Hilaire, ONTARIO (CANADA). from Disciplines Service line

  • IEC 61508 Functional Safety

    Functional Safety is concerned with products or systems whose failure to operate reliably could harm people or the environment. IEC 61508 is the accepted international standard that deals with the functional safety of electrical or electronic (including software-based) safety-related systems. The reliability of such systems is determined by the ...

    By SIRA Test and Certification based in Chislehurst, UNITED KINGDOM.

  • Office Safety

    This course is designed to cover hazards that may be encountered when working in administrative areas. These areas of concern are ergonomic stress, hazard communication, bloodborne pathogens, and electrical safety. The content in this course is designed to comply with the intent of the applicable regulatory requirements. 

    By United Alliance Services Corporation based in East Wareham, MASSACHUSETTS (USA).

  • NFPA 70E Electrical Safety in the Workplace

    This course will provide the public sectors with an understanding of the basic criteria for a comprehensive program that addresses electrical safety-related work practices in accordance with the National Fire Protection Agency (NFPA)70E standard titled Standard for Electrical Safety in the Workplace. Information presented will provide program ...

    By United Alliance Services Corporation based in East Wareham, MASSACHUSETTS (USA).

  • Electrical Safety Testing - CB Certification Services

    Kiwa is since a long period of time, amongst others, Notified Body for the Low Voltage Directive and E.M.C. Directive. Besides that, Kiwa has the possibility to arrange Voluntary certification as well, like:

    By Kiwa based in Rijswijk, NETHERLANDS.

  • Electrical Continuity Testing Services

    Continuity Testing is used to test the electrical continuity between the nozzle and the dispenser to eliminate static electrical charges from dispensing equipment. Dispensing equipment that is improperly installed or compromised will not have an electrical path to discharge static electricity, risking life and property. Tanknology’s ...

    By Tanknology Inc. based in Austin, TEXAS (USA). from Specialty Services Service line

  • Infrared Electrical Inspection Services

    Using cutting-edge infrared detection technology, our Certified Thermographers rapidly and accurately pinpoint the thermal anomalies that threaten the safety and reliability of your electrical systems. Because thermography is non-contact and non-destructive, there is no need to interrupt production or plan for costly shutdowns. Our thermographers ...

    By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA). from Infrared Thermography Services Service line

  • Electrical Preventative Maintenance Service

    A well-organized and implemented preventative maintenance program minimizes accidents, reduces unplanned shutdowns, and lengthens the mean time between failures (MTBF) of electrical equipment. Benefits of EPM can be categorized as direct and indirect. Direct benefits are derived from reduced cost of repairs, reduced downtime of equipment, and ...

    By Arc Flash Advisors Ltd. based in Mississauga, ONTARIO (CANADA).

  • Electrical Safety Consulting

    Electrical hazards are a leading cause of workplace injuries and fatalities. Fortunately, the incidence of injury or death can be reduced through identification of hazards, development of training programs, and implementation of a comprehensive electrical safety program. At the Institute for Environmental Assessment, Inc. (IEA), our safety ...

    By IEA based in Brooklyn Park, MINNESOTA (USA). from Safety Service line

  • SGS - Electrical Safety Certification Services

    If you achieve SGS Product Safety Certification your product will easily fulfill the requirements of any other safety mark in the world.As a notified and accredited certification body SGS operates one of the largest Safety & EMC testing and certification networks. To sell your electrical and electronic products anywhere in the world you will ...

    By SGS North America Inc based in Rutherford, NEW JERSEY (USA). from Automotive Service line

  • Infrared Electrical Inspections

    Using cutting-edge infrared detection technology, our Certified Thermographers rapidly and accurately pinpoint the thermal anomalies that threaten the safety and reliability of your electrical systems. Because thermography is non-contact and non-destructive, there is no need to interrupt production or plan for costly shutdowns. Our thermographers ...

    By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA). from Other Service line

  • Other Services

    Hazard Identification and Risk Assessment, Inspection and Auditing of your premises, Incident and Accident Investigation, Fire Risk Assessment and Prevention Methods, Manual Handling Risk Assessment, Movement of People and Vehicles Risk Assessment, Electrical and Work Equipment Risk Assessment, Chemical and Biological Risk Assessment, Physical and ...

    By Vasilis Papamichalis based in Aglantzia, CYPRUS. from Health and Safety Service line

  • Aerial Lift Safety Service

    According to the US Bureau of Labor Statistics, in the construction industry alone, 26 workers die each year from using aerial lifts. Most serious and fatal accidents occur due to electrocutions, falls and tip over. Summits Aerial Lift Safety training program teaches best safety practices, housekeeping and equipment maintenance techniques to ...

    By Summit Training Source Inc. based in Grand Rapids, MICHIGAN (USA).

  • Electrical Safety Test Services

    Manufacturers are required to ensure that electrical goods are designed and constructed in such a way as to ensure protection to users, as well as people and animals in the vicinity, against dangers when using/operating such goods, or material damage due to malfunctions or the influence of external factors.

    By Eurotest Laboratori S.r.l. based in Brugine, ITALY. from Testing Services Service line

  • CSA Product Certifications for PV Modules per CSA and ANSI/UL 1703 Standards

    CSA is accredited to provide product certifications for PV modules (CSA 61730-1 and -2, ANSI/UL 1703), CPV modules (UL Outline 8703), racking systems (UL Outline 2703), inverters (CSA 107.1, UL 1741), and other related products. In addition, CSA has CB accreditation pending.

    By CFV Solar Test Laboratory based in Albuquerque, NEW MEXICO (USA). from Test Services Service line

  • Ground And Ligtning Measurements

    We are performing electrical measurements of ground and lightning rod etc. according to “Ground rules” and other related regulations and reporting relatively.

    By Testmer based in Istanbul, TURKEY. from Mechanical And Electrical Safety Service line

  • Arc Flash and Electrical Safety Programs Services

    Written Safety Programs. Elecrical One-Line Diagrams. Hazard Analysis and Mitigation. Short Circuit Current Analysis. Protective Device Coordination Studies. Work Permits for Energized Cabinets. Identify Limited Boundaries of Approach. Training and Installations. Provide PPE, Tools, and Hardware.

    By Advanced Safety & Energy, Inc. based in Flint, MICHIGAN (USA).

  • Electrical Safety Testing Services

    Providing you with local electrical product safety testing for virtually every country where you need to sell your products.Intertek is a global leader in the testing, inspection, and certification of electrical and gas-powered products to ensure your product meets regulatory standards. We provide expert third-party testing to almost any product ...

    By Intertek Testing Services Ltd. based in London, UNITED KINGDOM. from Electrical & Electronic Service line

  • Electrical Engineering Services

    Our highly experienced team of electrical engineers provide you with excellent electrical engineering solutions in the development of your new or redesigned products. Xm Engineering carries out a range of electrical work where quality and safety is paramount. Our electrical contracts range from routine maintenance work through to the design and ...

    By XM Services Ltd based in Dundee, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you