Emergency Management Equipment available in Fiji

Available in Fiji| Near Fiji
262 Results found

We couldn't find any results in Fiji

Here is a list of results available in Fiji

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Health & Safety ×

  • Subcategory: Emergency Management ×

  • Available in: Australasia ×

  • Available in: Fiji ×

Speakman - Model SE-227 - Lifesaver Emergency Shower

by Spill Doctor (SA)     based in Cape Town, SOUTH AFRICA

The SE-227 Lifesaver Emergency Shower features an impeller action yellow Cycolac shower head with a horizontal overhead supply. The unit is activated with a 1' stay-open ball valve operated by a high visibility yellow pull rod.

HazSim - Model PRO - 18 Meter HazMat Simulator

by HazSim - HazMat Simulation Training System     based in CALIFORNIA (USA)

The HazSim Pro is our top of line simulator. It is fully customizable and offers the largest suite of training scenarios for the HazSim family of training products. Included in the base model is a jump up from 6+ of the HazSim First Responder to a full-service suite of 18 multi-gas meters. The HazSim Pro enables your trainer to customize ...

Model NG - Nitroglycerine

by Chematur Engineering AB     based in Karlskoga, SWEDEN

The injector nitration process was developed in Sweden and gave a revolutionary improvement of safety in the risky manufacturing of nitroglycerine and nitro glycol. The process is continuous – the reaction is performed instantaneously in an injector. Chematur Engineering has developed a unique washing/separation centrifuge with low RPM. ...

STS Plumes Simulation Exercise System

by Safe Training Systems Ltd     based in Wokingham, UNITED KINGDOM

STS has designed the PLUMES SIMULATION EXERCISE SYSTEM. A simulated survey meter, containing GPS and some real time computing, continuously establishes the operator’s position and calculates the airborne hazard that the operator should experience. This system adds great realism to exercises, and thus enhances the skills of monitoring staff.The ...

Mycometer Air - Airborne Fungal Biomass Testing System

by Mycometer     based in Horsholm, DENMARK

Mycometer-air is the only USEPA verified rapid method for quantifying airborne fungal biomass. With a sampling time of 15 minutes and a reaction time of 30 minutes, Mycometer®-air makes it possible to obtain rapid onsite results.

First Response - Emergency Leak Repair Kits

by InduMar Products, Inc.     based in Houston, TEXAS (USA)

The First Response Leak Repair Kit provides everything in one box for maintenance and safety teams to quickly respond to most common leaks, cracks, and gashes in pipes, tanks, and drums. Each kit includes a small, medium, and large size of the STOP IT Pipe Repair System, five Fix Stix™ Epoxy, eighteen assorted wooden plugs, rubber hammer, ...

Model TNT - Trinitro Toluene

by Chematur Engineering AB     based in Karlskoga, SWEDEN

The continuous TNT process developed by Chematur Engineering (CEAB) has been used in more than 20 projects with excellent safety record and very good performance. Our process includes continuous nitration of toluene or orthonitro-toluene, prewashing of the crude TNT, sellite washing of the crude TNT, post sellite washing of the purified TNT and ...

Model PT500 - 500 Gal Poly Bulk Liquid Storage Tank

by Complete Environmental Products     based in Pasadena, TEXAS (USA)

CEP-PT500 Poly Bulk Liquid Storage Tank, 500 Gal, 22' Manhole .Manufactured from linear polyethylene in one piece, seamless construction, this tank series is designed for either indoor or outdoor applications. Flat bottom design provides for easy and cost efficient installation.

Model 50 - Traffic Controller

by Grace Industries Inc     based in Transfer, PENNSYLVANIA (USA)

Approx. Size: 12-1/4” Long overall, 6” by 1-1/2” Diameter with 360º of luminary surface. Approx. Wt.: 6.7 oz. with 9 volt size alkaline battery included.

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Mycometer Surface - Mold Contamination Testing Tool

by Mycometer     based in Horsholm, DENMARK

Mycometer-surface is a versatile analytical tool for testing surfaces and bulk materials for mold contamination on-site. This method was developed by research mycologists at the University of Copenhagen in collaboration with building inspectors and mold remediation specialists. The aim was to specifically develop a method to quantify the level of ...

Husky - Emergency Equipment Staging (EES) Mats

by Husky Portable Containment     based in Bartlesville, OKLAHOMA (USA)

Husky Emergency Equipment Staging (EES) Mats are designed with three sections, one section is for airpacks and has ribbing installed standard, the center section is for rescue tools and the third section is a “RIT” tarp. These can be used as one complete mat or as separates. All full/empty and staging mats are built with heavy duty 18 ...

Training Network - Model 9996-DV - Hazwoper - Emergency Response Operations Package

by The Training Network     based in Durham, NORTH CAROLINA (USA)

This 4 program 'Operations' package is aimed at workers who contain HazMat releases.

Training Network - Model 9992-DV - Hazwoper - Emergency Response Awareness Package

by The Training Network     based in Durham, NORTH CAROLINA (USA)

Information that every HazMat worker should know is thoroughly covered by the 2 program 'Awareness' series.

Model 125 - Explosion-Proof Smoke Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

In the event of a fire in a building or other structure, such as an oil rig, Health and Safety regulations require that immediate action be taken to prevent the ingress of smoke and fume into air-conditioning and ventilation ducts. The Model 125 explosion-proof smoke monitor is specifically designed to be mounted in ventilation ducts and to comply ...

SiteWatch - Model 700 - Remote Site Security & Surveillance Camera

by Sensera Systems     based in Golden, COLORADO (USA)

The SiteWatch-700 Series is a turn-key remote site security and surveillance solution that can be installed in minutes to provide 24/7 remote site monitoring, recording, and alerting.

Blu-Med - Disaster Response Stockpile

by Blu-Med Response Systems     based in Kirkland, WASHINGTON (USA)

In the event of a natural disaster or healthcare emergency, being able to respond quickly by providing a safe and clean environment to carry out triage and medical procedures is essential to saving lives. BLU-MED Response Systems maintains a stockpile of disaster-response facilities, including turnkey mobile field hospitals, medical shelters, ...

Explosion Protection Valve

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

HazPak - Model CAT C4.4 NA - Explosion Protection Engine

by Pyroban Ltd     based in West Sussex, UNITED KINGDOM

The C4.4 NA HazPak is a naturally aspirated explosion protection engine designed for safe use in ATEX Zone 2 hazardous locations with its Gas Group IIA and T3 Temperature class certification. This explosion protection engine provides up to 86 brake horsepower at 2200rpm and is suitable for a range of well service applications such as compressor ...

Need help finding the right suppliers?

Let the XPRTs do the work for you