We couldn't find any explosion protection equipment suppliers or service providers located in Lebanon

Here is a list of equipment results with suppliers serving Lebanon

explosion protection Equipment available in Lebanon

  • Model NFPA 6 - Explosion Protection

    NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

    By IEP Technologies based in Marlborough, MASSACHUSETTS (USA).

  • Explosion Protection Valve

    The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

    By ATEX Brand- und Explosionsschutz GmbH based in Moehnesee, GERMANY. from Explosion Isolation System Product line

  • HazPak - Model CAT C4.4 NA - Explosion Protection Engine

    The C4.4 NA HazPak is a naturally aspirated explosion protection engine designed for safe use in ATEX Zone 2 hazardous locations with its Gas Group IIA and T3 Temperature class certification. This explosion protection diesel engine provides up to 70hp at 2200rpm and is suitable for a range of well service applications such as compressor sets, ...

    By Pyroban Ltd based in West Sussex, UNITED KINGDOM. from EX Power Systems- Powerpacks Product line

  • Model BS 7 - Spark Detection & Extinguishment Systems

    GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

    By GreCon Greten GmbH & Co. KG based in Alfeld-Hannover, GERMANY. from Fire and Explosion Protection Product line

  • Hygienic Explosion Vent

    Dusty conditions commonly associated with the storage and handling of grains and powders can potentially lead to dangerous explosions. Within the food-processing, beverage and pharmaceutical sectors, ensuring that the explosion protection solution is also suitable for sanitary applications is an added consideration. The specially designed ...

    By Elfab Limited based in North Shields, UNITED KINGDOM. from Explosion Vents Product line

  • UV Flame Detector

    FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS ...

    By Fireguard Safety Equipment Co Ltd. based in Willenhall, UNITED KINGDOM. from Explosion Proof Devices Product line

  • ATEX - Nozzle Systems

    ATEX offers a variety of nozzle systems, so that the required functionality of the explosion suppres-sion pressure system can be ensured in each individual case. The choice of the right system, however, is always made in the light of the particular process concerned. The ATEX nozzle systems are particu-larly used in fields where hygienic ...

    By ATEX Brand- und Explosionsschutz GmbH based in Moehnesee, GERMANY. from Explosion Suppression System Product line

  • Model EPL-SL-10 - Explosion Proof String Lights

    The Larson Electronics EPL-SL-10 Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.

    By Larson Electronics LLC based in Kemp, TEXAS (USA). from Explosion Proof Lights Product line

  • Model 3121 SRE - Explosion Vents

    Explosion vents offer a passive and economical means of explosion mitigation.  Each explosion vent is precisely designed to burst at a given pressure to maintain the structural integrity of the protected equipment. Vents come in a variety of dimensions and models.  The CV Technology standard vent is our TLFG model. The TLFG explosion ...

    By CV Technology, Inc. based in Jupiter, FLORIDA (USA).

  • Interceptor - Model 3115 HRD 8L-20L-50L - Explosion Suppression System

    The Interceptor-HRD explosion suppression system is designed to provide an active method to protect process equipment from a dust explosion hazard.  The principle of operation for the Interceptor-HRD system is timely detection of the pressure rise during the initial stage of an explosion, followed by fast injection of an extinguishing agent.

    By CV Technology, Inc. based in Jupiter, FLORIDA (USA).

  • Explosion Proof Reach Trucks

    Pyroban can use our Ex-tec 2G Zone 1 conversion technology across all makes and models of electric reach trucks. Our extensive engineering experience allows us to design customised Zone 1 protection for almost all types and sizes of trucks. We will work with your engineers to develop a protection package to offer maximum safety with the minimum of ...

    By Pyroban Ltd based in West Sussex, UNITED KINGDOM. from Materials Handling Conversions - Zone 1 Equipment Product line

  • Model 12 Series - Explosion-Proof Temperature Switch

    12 Series hazardous location switches are ideal for operation in tough applications where space is at a premium. A snap-action Belleville spring assembly is used to provide vibration resistance and prolonged switch life. The 316 stainless steel enclosure and hermetically sealed switch provide rugged protection from the environment. Approved for ...

  • Explosion Proof Counterbalance Forklifts

    Pyroban can use our Ex-tec 2G Zone 1 conversion technology across all brands and models of electric counter balance forklift trucks. Our extensive engineering experience allows us to design customised Zone 1 protection for almost all types and sizes of forklift trucks. We will work with your engineers to develop a protection package to offer ...

    By Pyroban Ltd based in West Sussex, UNITED KINGDOM. from Materials Handling Conversions - Zone 1 Equipment Product line

  • Explosion Vent Systems

    Explosion Vent Systems are designed to minimize damage to process vessels, ducts, and other industrial structures, in the event of a deflagration involving combustible materials. These explosion vent panels are designed to ruptures at a predetermined pressure, to allow the fireball and explosive pressure to vent into a safe area. IEP Technologies ...

    By IEP Technologies based in Marlborough, MASSACHUSETTS (USA).

  • JKF - Explosion Duct Valves

    The explosion duct valve is used in order to prevent that an explosion in the plant will be channelled back to the production premises and machines. The explosion duct valve is mounted on the duct section between the plant and the source of dust. The explosion duct valve stops explosions that occur in the opposite direction of the normal flow. ...

    By J.K.F. Industrie A/S based in Hadsund, DENMARK. from Filters and Separators Product line

  • Det-Tronics - Model SmokeWatch U5015 - Explosion-Proof Smoke Detector

    The Det-Tronics SmokeWatch U5015 Explosion-Proof Smoke Detector is a Class I Division 1, 2 and Zone 1 explosion-proof rated smoke detector that is suitable for hazardous, industrial, and commercial applications. This smoke detector has unique design that operates effectively in both smoldering and rapidly growing fires. The photoelectric operation ...

    By Det-Tronics - Detector Electronics Corporation based in Bloomington, MINNESOTA (USA). from Flame Detection Product line

  • Explosion Isolation Systems

    Explosion isolation systems are designed to detect an explosion in a process vessel, and then create a barrier that reduces the risk of the flame/explosion propagation to other interconnected equipment. Such explosion propagation is likely to give rise to an enhanced (more intense) explosion in any connected vessel than would be expected from a ...

    By IEP Technologies based in Marlborough, MASSACHUSETTS (USA).

  • BLITZDUCTOR - Model XT Ex (i) - Protection Modules for Use in Hazardous Areas

    Blitzductor XT EX is a pluggable and universal four-pole DIN rail mounted surge arrester designed for the most stringent requirements on the availability of intrinsically safe measuring and control circuits and bus systems. Regarding intrinsic safety, the arrester is considered unearthed and its self-inductance and self-capacitance are negligibly ...

    By DEHN SÖHNE GmbH Co. KG. based in Neumarkt, GERMANY. from Surge Protection for IT Systems Product line

  • Model EPL-SL-10-LED - Explosion Proof LED String Lights

    The Larson Electronics EPL-SL-10-LED Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection. This explosion proof string light set from Larson Electronics contains a total of ten 10 watt work ...

    By Larson Electronics LLC based in Kemp, TEXAS (USA). from String Lights and Temporary Light Stringers Product line

  • A.YITE - Model GE-316 - Paddle Flow Switch (Anti Explosion Proof)

    Smart flow switch, explosion proof, GE-316 Paddle Flow Switch is specially designed for the Flow Monitoring of Water Source, Water-Loop Heat Pump Air Conditioning Systems and Heat Pump Water Heater..This paddle water flow switches is produced as the Explosion Proof standard, could be used in the anti explosion environment. International ...

    By A.YITE Technology based in Shanghai, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you