Acoustic Technology (Environmental Acoustics) equipment available in Montana

  • Tsunami Detection System

    A tsunami wave in deep water creates a small but measurable change in pressure that will be maintained for as long as twenty minutes. By monitoring any such changes, subsea detectors can be used to trigger an alarm that sends a warning message to a buoy-mounted receiver on the surface. The buoy, in turn, relays the message via a satellite data ...

    By Sonardyne International Ltd. based in Hampshire, UNITED KINGDOM.

  • High Intensity Light Systems

    FGS provides a range of underwater High Intensity Light systems for deflecting eels from intakes, which can be used on their own or combined with acoustic systems, including the SPA and the BAFF, to provide complete protection for all fish species. If supplied separately the High Intensity Light systems are easily upgradeable at a later date to ...

    By Fish Guidance Systems Limited based in Lower Swanwick, UNITED KINGDOM.

  • Model SC2250M10 - Ultrasonic Contact Transducers

    Sonomecha Contact Transducers adapt low loss pure hard alumina wear face that is acoustically matched to afford the best performance due to scrubbing on abrasive surfaces. The Contact Transducers are bonded with special sealants for even and longer lasting wear and housed in rugged stainless steel case.

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Industrial Ultrasound- Contact Transducers Product line

  • Model SC1000B25 - Ultrasonic Contact Transducers

    Sonomecha Contact Transducers adapt low loss pure hard alumina wear face that is acoustically matched to afford the best performance due to scrubbing on abrasive surfaces. The Contact Transducers are bonded with special sealants for even and longer lasting wear and housed in rugged stainless steel case.

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Industrial Ultrasound- Contact Transducers Product line

  • Trane - 150-300 Tons Stealth Air-Cooled Chiller

    A Trane Stealth air-cooled chiller 150-300 tons delivers an industry-leading combination of part-load efficiency and full-load efficiency. Multiple InvisiSound acoustical treatment options provide the flexibility to meet specific application needs and the InvisiSound Ultimate package produces the lowest published sound levels in the industry.

    By Trane based in Dublin, IRELAND. from Air-Cooled Chillers Product line

  • Model SC0350B25 - Ultrasonic Contact Transducers

    Sonomecha Contact Transducers adapt low loss pure hard alumina wear face that is acoustically matched to afford the best performance due to scrubbing on abrasive surfaces. The Contact Transducers are bonded with special sealants for even and longer lasting wear and housed in rugged stainless steel case.

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Industrial Ultrasound- Contact Transducers Product line

  • Model SC0250B25 - Ultrasonic Contact Transducers

    Sonomecha Contact Transducers adapt low loss pure hard alumina wear face that is acoustically matched to afford the best performance due to scrubbing on abrasive surfaces. The Contact Transducers are bonded with special sealants for even and longer lasting wear and housed in rugged stainless steel case.

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Industrial Ultrasound- Contact Transducers Product line

  • seatooth - Model S200 - Underwater Radio Modem/Location System

    seatooth® S200 is a through-water radio communication system, designed to interface with subsea sensors and control units. WFS products provide a viable alternative or complement to acoustic and optical technology in building subsea data acquisition and control networks for unmanned operations in harsh environments.Wireless technology from WFS ...

    By WFS Energy & Environment based in Livingston, UNITED KINGDOM.

  • Pipepod - Hydrostatic Leak Locator System

    The system operates by using a unique cabling technique for long distance pipe leak detection without the requirement of water flow within a pipeline. Internal acoustic technology is fast becoming the most reliable technique of accurately tracing leaks on all material pipelines. The Pipepod Hydrostatic is a failsafe for all new pipe installation ...

    By Pipa Ltd based in Derby, UNITED KINGDOM.

  • Case Inspection System

    The PRO Series Case system from TapTone is designed for non-contact, non-destructive, 100% automatic container inspection through a sealed cardboard and/or shrink wrapped case. The system offers the option of acoustic or proximity technology to inspect glass jars with metal closures or metal cans for pressure or vacuum ...

    By Teledyne TapTone based in North Falmouth,, MASSACHUSETTS (USA). from Leak Sensors Product line

  • Model Type 1 - 840015 - Sound Meter

    Meets IEC61672 and ANSI S1.4 frequency weighting and time weighting specifications for a class 1 sound meter. Features a large LCD display, fast or slow time weightings, peak hold and AC output. A calibration adjustment allows the user to quickly calibrate the meter’s internal electronics. Can also be acoustically calibrated, in compliance ...

    By Sper Scientific based in Scottsdale, ARIZONA (USA). from Environmental Quality - Sound Meter Product line

  • Sonomecha - Immersion Transducers

    Standard Design:12 mm (1/2') and 25 mm (1.0') Diameter. Type: Round. BNC or UHF connector available. Stainless Steel Transducer Housing. Acoustically best matched when use in water. Hermetically sealed transducers provide high sensitivity. Application:tubes,pipes,plates,bars, raw and finished components in the immersion media. Transducer material: ...

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Others Product line

  • Sonomecha - Model SI3500 - Immersion Transducers

    Sonomecha Immersion Transducers presents the most comprehensive selection of submersible ultrasonic transducers. Sonomecha offers a wide variety of Immersion Transducers in the frequency range of 1MHz to 5MHz and from 12mm (0.5inches) to 25mm (1.0 inch) diameter. The precision acoustic lens make Sonomecha hermetically sealed transducer impervious ...

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Immersion Transducers Product line

  • Sonomecha - Model SI5000 - Immersion Transducers

    Sonomecha Immersion Transducers presents the most comprehensive selection of submersible ultrasonic transducers. Sonomecha offers a wide variety of Immersion Transducers in the frequency range of 1MHz to 5MHz and from 12mm (0.5inches) to 25mm (1.0 inch) diameter. The precision acoustic lens make Sonomecha hermetically sealed transducer impervious ...

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Immersion Transducers Product line

  • Sonomecha - Model SI2250 - Immersion Transducers

    Sonomecha Immersion Transducers presents the most comprehensive selection of submersible ultrasonic transducers. Sonomecha offers a wide variety of Immersion Transducers in the frequency range of 1MHz to 5MHz and from 12mm (0.5inches) to 25mm (1.0 inch) diameter. The precision acoustic lens make Sonomecha hermetically sealed transducer impervious ...

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Immersion Transducers Product line

  • Model Micro SV - Ideal For Measuring Sea Surface Sound Velocity For Multi-Beam Systems

    AMLs’ Micro SV provides single-sensor, direct measurement of sound velocity in a very small package. It is ideal for measuring sea surface sound velocity for multi-beam systems. It is also appropriate for integration into AUV or ROV systems. Like all AML sound velocimeters, the Micro SV directly measures the time-of-flight of an acoustic ...

    By AML Oceanographic Ltd based in Sidney, BRITISH COLUMBIA (CANADA). from Traditional Instruments Types & Models Product line

  • Sonomecha - Model SI1000 - Immersion Transducers

    Sonomecha Immersion Transducers presents the most comprehensive selection of submersible ultrasonic transducers. Sonomecha offers a wide variety of Immersion Transducers in the frequency range of 1MHz to 5MHz and from 12mm (0.5inches) to 25mm (1.0 inch) diameter. The precision acoustic lens make Sonomecha hermetically sealed transducer impervious ...

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Immersion Transducers Product line

  • Model Onyx Series - Vibration Isolation Systems

    Elegant Combination of Low-profile and High Performance. Onyx vibration isolation table is designed to isolate sensitive equipment from vibrations caused by foot traffic, HVAC systems, nearby operating machinery, etc. It consists of a steel tabletop supported by pneumatic isolators, which are easily inflated using an air-pump or other automatic ...

    By Herzan LLC based in Laguna Hills, CALIFORNIA (USA). from Air-based Vibration Iso Product line

  • Dolphin - Model G3 - Non-Invasive Solution for Inner Diameter Inspection System

    AcousticEye’s non-invasive solution for inner diameter inspection of today’s hard-to-inspect tubes up to 4' enables ultra-fast, accurate inspection of boilers, Fin Fans and other heat exchangers regardless of tube shape or material.Featuring patented Acoustic Pulse Reflectometry (APR) technology, Dolphin G3 is an advan

    By AcousticEye based in Houston, TEXAS (USA).

  • Sonomecha - Model SP5000 - Protected Face Transducers

    Sonomecha Protected Face Contact Beam Transducers are designed to solve a wide variety of contact applications. Sonomecha offers a wide variety of Protective Face Contact Beam Transducers in the frequency range of 2.25MHz to 5MHz and from 12mm (0.5inches) to 25mm (1.0 inch) diameter. The Protected Face Contact Beam Transducers adapt low loss pure ...

    By Sonomecha Technologies, Inc. based in Carrollton, TEXAS (USA). from Protected Face Transducers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you