Environmental Toxicology Applications available in Tajikistan

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations worldwide, in plants just like yours, have shown Anguil to be a Proven Solutions Provider.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Intelligent compliance solutions for healthcare industry

    Providing high quality patient care gets tougher all the time, thanks to increasing cost pressures and an ever-changing compliance landscape. Verisk 3E`s powerful suite of outsourced services can be tailored to assist any healthcare organization in maintaining compliance and improving EHS performance. Our services have been proven to deliver cost savings for satisfied healthcare companies across the globe.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    PTR-MS systems for security and safety purpose

    Illicit substances real-time detection with IONICON PTR-MS. PTR-MS combines all features that are needed for analyzing dangerous and illicit substances like explosives, chemical warfare agents (CWA), toxic industrial chemicals (TIC) and drugs.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Water Treatment Solutions for Nitrate Removal

    Most nitrogenous materials in natural waters tend to be converted to nitrate, so all sources of combined nitrogen, particularly organic nitrogen and ammonia, should be considered as potential nitrate sources. Primary sources of organic nitrates include human sewage and livestock manure, especially from feedlots. The primary inorganic nitrates which may contaminate drinking water are potassium nitrate and ammonium nitrate both of which are widely used as fertilizers. According to the Toxics Release Inventory, releases to water and land totaled over 112 million pounds from 1991 through 1993.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    REACH compliance

    Capture, Analyze and Comply with REACH 1 2 3, a suite of software tools that can enable your organization to become REACH-compliant based on quantity triggers and defined time lines. This intutive software module and process helps organizations to easily:

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    SDS translation

    We literally speak multi-lingual SDS. Our software is used on almost every continent. Through our team of chemists, toxicologists and linguists we ensure that you have the most accurate country-specific SDSs. Whether you need software tools or translation services, we go beyond simple translation. Our software includes more than 14,000 international phrases in more than 45 languages, so our multi-language graphical user interface (GUI) puts the power in your hands. In addition, we provide the necessary advice and guidance you need to exceed local requirements and advance safety. Whether you need single document translated or need to migrate all your documents into a new language, we can help you quickly comply with region-specific requirements

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Drinking water treatment

    Drinking water can be produced from any natural sources like groundwater, lakes and rivers (surface waters) or seawater. Drinking water standards are set by the World Health organisation or by the European Union. Drinking water must be free of suspended solids, microorganisms and toxic chemicals. Mineral concentration recommendation vary from country to country but most of the minerals have a maximum concentration recommended to ensure safe, equilibrated and pleasant water to drink.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Pesticide and toxin screening for the food industry

    The number of pesticides and other potentially dangerous toxins is increasing constantly, posing special analytical challenges. It is crucial to screen food for the presence of toxins accurately and reliably, and to ensure the safety and quality of nutrition. To do so, we have to have the knowledge about how to deal with several hundreds of different poisonous matters. Bruker delivers solutions that meet the requirements for the identification and quantification of toxicants during the screening of each sample. Bruker’s high-performance TOF-MS is ideally suited for all screening tasks. And Bruker’s SCION series sets a new industry standard for GC-MS. Their easy usability, sensitivisty, robustness and performance make SCION solutions a major technology in food safety.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Soldering Fume Extraction

    Soldering fumes are Unbreathable. Soldering enables the joining of metal parts by melting a filler metal to attach wires and other metallic components. The fumes generated from melting solder especially solder containing Lead or Tin present are dangerous and require local ventilation to remove harmful smoke from the work area. Soldering application need to be properly ventilated to prevent toxic fumes from reaching the worker`s breathing zone. There are a number of different industries such as the electronics assembly industry and electronics repair comapnies who must deal with the hazards of solder smoke. Fumes created by automated PCB soldering including wave soldering machines, handheld soldering irons, torch brazing and furnance brazing are often ignored because of the small volume of smoke generated. However, these applications still require careful consideration as dangerous fumes can impair employee’s respiratory tracts depending on the filler metals used. Because manual soldering applications require working with tiny components, workers end up positioning their heads right above toxic rosin or lead solder fumes with a direct exposure into their throat, nasal passages and lungs, and as a result, they can experience respiratory complications. Rosin irritation can cause various side effects and the inhalation of lead fumes is carcinogenic. As lead oxide smoke collects in your lungs, it can be transferred into your bloodstream. Diversitech recommends installing soldering fume extraction equipment to prevent the inhalation of dangerous fumes. These ventilation units will not only protect each person working at a soldering station when installed and positioned correctly, but they will also prevent fumes from contaminating other worker’s lungs.?

    By DiversiTech Inc based in Montreal, QUEBEC (CANADA).

  • Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Waste water respirometry solutions for toxicity based consents

    Water companies, water authorities or publicly-owned treatment works (POTW) need to have some knowledge of the composition of the wastes they it receive. In addition to testing for ammonia and BOD or COD levels, treatment works can license industrial discharges on the basis of concentrations of some of the known toxic compounds. However, it is recognised that very many non-regulated toxic materials still enter the treatment works and reduce the efficiency of biodegradation, and may cause toxic shock. The way is now open for more widespread use of direct toxicity tests as a basis for toxicity-based consents. Samples of the industrial effluent are collected at source, for testing on the actual bacteria of the receiving activated sludge. The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. Note that this approach mirrors that of the regulators of discharges to receiving waters, who are now using direct toxicity tests (DTA) or whole effluent toxicity tests (WET tests) in order to protect the receiving environment.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can again be managed using the Strathtox Respirometer. An alternative approach is to undertake toxicity reduction procedures, such as neutralisation or acid hydrolysis, in pilot-scale laboratory studies. The Respiration or the Nitrification Inhibition Test may be used for this. In the future, toxicity reduction may be stipulated by local authority, water company or publicly-owned treatment works prior to giving discharge consents. Toxicity reduction may be evaluated using toxicity tests on activated sludge provided by the treatment works.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Spectrophotometry for toxic waste industry

    By Buck Scientific Inc based in East Norwalk, CONNECTICUT (USA).

  • Air pollution control for soil remediation

    Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA).

  • Biological wastewater processes for chemical & pharmaceutical

    This waste stream can have complex characteristics: Biocides, heavy metals, pharmaceutical intermediates and endocrine disruptors. We are familiar and know how to marry appropriate treatment to make sure you are compliant.

    By Biowater Technology AS based in Tonsberg, NORWAY.

  • Automation of molecular pathology

    Tumor markers found in blood, urine and body tissues can be used in diagnosing and treating cancer. Each tumor marker is indicative of a particular disease and thus can be used for the screening, monitoring and diagnosis of specific tumor types. In addition to being used in prognosis, these molecular markers help to predict the response, resistance and toxicity to therapy. For example, BCR-ABL gene sequence detection is used to diagnose chronic myelogenous leukemia and acute lymphatic leukemia.

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Sludge - slurry dewatering solutions & filter press technology

    DIEMME Filtration has the correct solutions for all problems of slurry - sludge dewatering, because every DIEMME FILTRATION filter press, is projected in connection with the chemical physical characteristics of the sludge.

    By Aqseptence Group based in Aarbergen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you