Explosion Modeling (Explosion Safety) Equipment
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer ...
-
Manufactured by Safety Systems Technology, Inc. (SST)based in USA
SST’s Model M400 Manual Stations is a high quality die cast metal unit designed for quick, reliable response in emergency situations. The station is activated by grasping the handle marked “pull” and pulling it down to the locked position. Explosion proof model suitable for Class I Groups B, C, D, Class II Groups E, F, G, ...
-
Manufactured by LP Sensor Technologybased in USA
±0.25%, ±0.5%, ±1% full scale accuracy; Temperature ranges are from -40°C to 100°C; Multiple options for pressure ports (customizable); Multiple options for electrical connections (customizable); Voltage or current voltage outputs; CE / Intrinsically Safe / Explosion Proof models available; Modbus TCP/IP and DNP ...
-
Manufactured by Moffitt Corporationbased in USA
Galvanized Steel Square In-Line Centrifugal Fans are ideal for clean air applications where space is one of the main considerations. These fans have non-overloading, backwardly inclined wheels. They are spark resistant and come in a variety of sizes. Safety disconnect is standard for all motors (except explosion proof models). The fan ...
-
Manufactured by Crane Pump & Systemsbased in USA
BLADE Grinder pumps are the Barnes solution to high head high flow waste water grinding applications in municipal, commercial and light industrial environments. They are available in 3HP to 15HP standard and explosion proof models with 2”, 2.5” and 3” discharge sizes. BLADE grinder pumps are designed for long ...
-
Distributed by BASCO, Incbased in USA
. Explosion-Proof models are 115/230 volt single-phase, supplied unwired with motor leads only. Air Motors are variable speed 300-3,000 RPM, supplied with speed control valve and muffler.Shown ...
-
Distributed by BASCO, Incbased in USA
at 1725 rpm, mix liquids up to 500 cps. Electric motors are TEFC or explosion-proof, 115/230 volt, single-phase. Gear Drive Mixers operate at 425 rpm, handle heavy liquids or slurries up to 5000 cPs viscosity. TEFC motors are supplied with 10´ cord with switch and plug. Explosion proof models do not include plug.Shown ...
-
Distributed by BASCO, Incbased in USA
. Explosion-Proof models are 115/230 volt single-phase, supplied unwired with motor leads only. Air Motors are variable speed 300 - 3,000 RPM, supplied with speed control valve and muffler.Shown ...
-
Manufactured by Conveyor Components Companybased in USA
The NEW Model CT comprised of a Control Unit and Tilt Probe senses the presence or absence of material. The new intrinsically safe, cULus Listed Control Unit is enclosed in rugged cast aluminum housing with LED Indicator lights and surface mount printed circuit board. Weatherproof, Dust-Ignition Proof and Explosion Proof models are ...
-
Manufactured by CV Technology, Inc.based in USA
and installation. Comprised of both the flame arrestor and explosion vent the Interceptor-EV can be rearmed in the field. The standard TLFG model explosion vent allows this flameless vent to be used on variety of difficult applications including bucket elevators, conveyors, and small ...
-
Manufactured by Precision Digital Corporationbased in USA
Precision Digital's model PD656 Explosion-proof meter is powering the level transmitter and displaying its output on an easy to ready 0.8' high LED display. The PD656 can be equipped with up to four relays that feature 0-100% deadband and pump alternation ...
-
Manufactured by Raille Limitedbased in UNITED KINGDOM
Manufactured with a stainless steel casing, Raille spark detectors are robust and reliable, even in harsh industrial environments. The detector lens is installed almost flush with the inside wall of the extraction duct or drop chute, so it does not interfere with material flow. ATEX approved for use in zone 20 explosive atmospheres. The ...
-
Manufactured by Neptune Chemical Pump - a PSG Dover Brandbased in USA
Neptune Model 481-S and 501-S hydraulic diaphragm metering pumps are built to deliver very low flows, repeatable and accurate ranging down to quarts per day. Discharge pressures are higher than are possible with mechanical diaphragm pumps. Explosion-proof models are available for use in hazardous ...
-
Manufactured by Crane Pump & Systemsbased in USA
Barnes Solids Handling pump series are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof models. Barnes Solids Handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any ...
-
Manufactured by Nivelco Process Control Co.based in HUNGARY
Product properties: 2-wire compact transmitter. Plug-in graphic display module. Separated version up to 10 m. Αντιστ?θμιση θερμοκρασ?ας. Power relay output, programmable. Wide selection of accessories. Explosion-proof models. 5 ...
-
Manufactured by Qingdao Huahai Environmental Protection Industry Co.. Ltdbased in CHINA
ship oil spills and needs to be unloaded. It consists of the storage and transportation platform, unloading pump, explosion-proof motor type (explosion-proof diesel model), hydraulic power station, pipe reel, oil hose, hydraulic hose, spare parts and maintenance ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
With a pressing power of 270 kN the HSM FP 3000 is excellently suited for pressing light metal and rolled hoop ...
-
Manufactured by AGI Glassplantbased in UNITED KINGDOM
AGI Rotary Evaporator is made for manufacturing applications. With a robust construction, heavy duty materials and superior design, it fulfils the round-the-clock process demands of industrial operation. Rotary Evaporator is ideal for continuous operation in industrial environments; with capacities ranging from 20 L to 200 L, it can take on many demanding evaporation processes. 200 L is the ...
-
Manufactured by DMN-Westinghousebased in NETHERLANDS
The USAL rotary valves have been designed by DMN-WESTINGHOUSE for many applications in the metering and pneumatic conveying of products in powder and granular form. Due to the modular design of this extensive and flexible range of valves many different configurations are available, using standard components. The USAL valves are also available with two optional bodies in various material sorts, ...
-
Manufactured by Hycontrol Limitedbased in UNITED KINGDOM
The simple theory of liquid buoyancy is utilised for the main principle of the LF series. A change of liquid level correspondingly moves the float between extreme levels of up and down, which will then trigger a change in state as required. It is a remarkably simple yet effective solution for many level switching ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you