Fire Modeling Equipment For Health And Safety Available In Palau
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Depending on where you will install the fire water tank, you can use any water tank you want, such as stainless galvanized. Water tanks are known as special tanks that are used for both individual and commercial purposes and have different sizes according to the purpose of use. In general, cylindrical, prismatic tanks, it is possible to store water for as long as desired. Types of water tanks ...
-
Manufactured by CHEMISAFE S.r.l.based in ITALY
Certified according to the standard 14470-1 Type 90 (30 minutes for the Safety Fire Case model).Completely made of stainless steel with a layer of lead the thickness of which can vary from 2 to 5 mm depending on the radioactivity of the stored products. Our design department is on hand to carry out your ...
-
Manufactured by Naffco Fzcobased in UNITED ARAB EMIRATES
This model consists of one electric motor driven Fire Pump, diesel engine driven Fire Pump, one common Fire Pump Controller, pressure vessel, standard accessories and base frame. The electric pump shall be vertical/horizontal multistage type close/flexibly coupled to electric motor. The electric motor is squirrel cage induction type, suitable for 3 phases, with required horse power rating. The ...
-
Manufactured by Perar s.p.abased in ITALY
The ball of trunnion mounted configuration is supported by bearing plates hold by the end adaptors. In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear. PERAR Trunnion Mounted Bolted Body Side-Entry Ball Valves represent the basic design standard. They are manufactured in a wide range of sizes ...
-
Manufactured by Perar s.p.abased in ITALY
The ball of trunnion mounted configuration is supported by bearing plates hold by the end adaptors. In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear. On PERAR Trunnion Mounted Welded Body Ball Valves the potential leak paths are minimized making them suitable for buried installations and in ...
-
Manufactured by ecom GmbHbased in GERMANY
ecom-AK - Read-out head for digital firing automates. Automatic recognition of firing automate model. Read-out function for errors and operation stands. Integral ...
-
Manufactured by Ecosafe S.A.based in SWITZERLAND
Compliant with CNPP FSE 98-006 specifications. Standardized warning labels in accordance to ISO 3864, ISO 7010 and NF X08.003 standards, and to the European directive 92/58/ ...
-
Manufactured by Ecosafe S.A.based in SWITZERLAND
Compliant with CNPP FSE 98-006 specifications. Standardized warning labels in accordance to ISO 3864, ISO 7010 and NF X08.003 standards, and to the European directive 92/58/ ...
-
Manufactured by Preferred Utilities Manufacturing Corporationbased in USA
The Link Trim Actuator (LTA) is an easy to install actuator used for oxygen trim control on single point positioning (jackshaft) burners. The LTA mounts inline as part of the burner fan damper linkage rod. ...
-
Manufactured by Albany Engineering Company Ltd.based in UNITED KINGDOM
Albany is a market leader in the field of foam concentrate pumps, which is why we have created a sturdy range of GE fire/foam pumps. A popular choice for many years in the Fire industry, all models are NFPA20 compliant with certain models also VdS certified. Designed for fixed and vehicle applications, GE style pumps can be supplied and mounted on a baseplate and driven by a prime mover such as ...
-
Manufactured by Simplex Manufacturing Companybased in USA
Simplex Aerospace model 323 Fire Attack aerial firefighting system for the AgustaWestland AW119 Koala helicopter. The system consists of a belly mounted tank and a DC electrical hover refill pump and hose. The belly tank is manufactured from high-strenth, low-weight carbon fiberglass material, and holds 1,200 liter (317 gallons) of water. Features of the tank includes pilot friendly controls, ...
-
Manufactured by Simplex Manufacturing Companybased in USA
Simplex Aerospace Model 316 Fire Attack aerial firefighting system for the AIRBUS HELICOPTERS EC225 and AS332L. The system consists of a belly mounted carbon fiberglass tank, which holds 2270 liters/600 gallons of water or 91 liters/24gallons of foam retardant. Other features of the tank include a 3,785 liters/1,000 gallons per minute hover refill pump, internal foam injection system, corrosion ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Model 7000 is a pressure relief valve designed to relieve excess pressure caused by pressure surges or temperature changes in all wet fire sprinkler systems. Model 7000 pressure relief valves comply with NFPA 13 requirements stipulating that a pressure relief valve must be installed on all wet systems and downstream of all pressure-reducing valves. Model 7000s feature a bronze body, stainless ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's RiserPACK Model 8000 is a pre-assembled floor control assembly designed to meet NFPA 13D requirements for residential fire sprinkler systems. This model includes a flow switch, Inspector'sTEST Model 3011BV, and a Model 7500 pressure gauge. Available in sizes ranging 1" - 2", orifice sizes 3/8" (K2.8) - 5/8" ELO (K11.2), and thread x thread, thread x groove, or groove x groove ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Model 7000L temporarily locks closed for hydrostatic testing. The Model 7000L is a lockable pressure relief valve specifically designed to relieve excess pressure caused by pressure surges or temperature changes in all wet fire sprinkler systems. Model 7000L pressure relief valves comply with NFPA 13 requirements stipulating that a pressure relief valve must be installed on all wet systems and ...
-
Manufactured by Ningbo Deling Security Technology Companybased in CHINA
Using RISC embedded CPU technology based on ARM platform and real-time preemption multi-task embedded operating system, with low power consumption, fast processing speed, fast system response, reliable and stable ...
-
Manufactured by Fire Testing Technologybased in UNITED KINGDOM
SO 5660; ASTM E1354; ASTM E1474; ASTM E1740; ASTM F1550; ASTM D6113; CAN ULC 135; BS 476 Part 15. The iCone²âº Calorimeter (ISO 5660; ASTM E1354) is the first in FTT’s new interactive range of calorimeters, the i-series. It features the latest technology in control and automation making it the most advanced, reliable and user-friendly cone calorimeter in the ...
-
Manufactured by Ambest Electronics (Ningbo) Co Ltdbased in CHINA
660 manual call points connect to addressable fire detection control and indicating equipment. Up to 125 devices can be connected to each alarm zone loop using the addressable loop communications protocol. A pressure-activated displacement element provides a safe and convenient way for building occupants to manually initiate a fire alarm condition. All models have an integral alarm indicator that ...
-
Manufactured by Smiley Monroe Ltdbased in UNITED KINGDOM
Used widely in the bulk handling industry, from quarrying to mining, impact bars are an integral part of Conveyor Belt Support and Spillage Control Systems at conveyor load and transfer points. Impact bars, unlike conveyor rollers, which eventually break or seize and act like a brake, support and absorb the impact of heavy, often sharp material, not the conveyor belt; the low friction ...
-
Manufactured by Omniguard, A Company of Firefly ABbased in SWEDEN
Model 760 is the most advanced multi-spectrum IR5 flame detector in today’s market. In a breakthrough technological advance, the model 760 senses infrared radiation in five discreet infrared wavelengths. The multi-spectrum sensor information, combined with the sophisticated algorithm, enables the model 760 the ability to quickly detect hydrocarbon and certain non-hydrocarbon fuelled fires. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you