Fire Protection Equipment For Health And Safety Available In Africa
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The VIDEOSCOPE XT is a truly industrial-grade borescope camera that has been designed for hazardous environments. This US-made inspection system has been tested and certified under MIL-STD 810G method 511.6 (explosive atmosphere) in accordance with UL standards for NFPA 70: class 1 division 2 requirements for hazardous locations. This borescope camera is also UL certified for Class I Division 2 ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation's speed during closing, preventing ...
-
PremiumManufactured by TABE Hammersbased in SPAIN
Model: MT 65. Operating weight: Kg 67. Total length: mm 846. Working pressure: bar 100-140. Working flow: L/min 15-25. Blow frecuency: bpm 800-1.200. Diamter of tool: mm 37. Length of tool: mm 435. Excavator: Tn ...
-
PremiumManufactured by TABE Hammersbased in SPAIN
Model: MT 20. Operating weight: Kg 2.300. Total length: mm 2.500. Working pressure: bar 160-180. Working flow: L/min 180-210. Blow frequency: bpm 350-600. Diameter of tool: mm 150. Length of tool: mm 1.320. Excavator: Tn ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Depending on where you will install the fire water tank, you can use any water tank you want, such as stainless galvanized. Water tanks are known as special tanks that are used for both individual and commercial purposes and have different sizes according to the purpose of use. In general, cylindrical, prismatic tanks, it is possible to store water for as long as desired. Types of water tanks ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation’s speed during closing, preventing ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve controls tanks and reservoirs emptying and avoids overflow. The valve operates by means of a differential hydraulic float complete with regulating levels mounted on the tank side. The float maintains the valve closed and opens only when the minimum pre-set level is reached. Once the valve is open, float allows tank inlet until maximum water level is reached ...
-
PremiumManufactured by TABE Hammersbased in SPAIN
Model: MT 145. Operating weight: Kg 140. Total length: mm 940. Working pressure: bar 100-140. Working flow: L/min 20-40. Blow frecuency: bpm 850-1.200. Diamter of tool: mm 55. Length of tool: mm 450. Excavator: Tn ...
-
PremiumManufactured by TABE Hammersbased in SPAIN
Model: MT575. Operating weight: Kg 600. Total length: mm 1.67. Working pressure: bar 120-135. Working flow: L/min 90-120. Blow frequency: bpm 750-950. Diameter of tool: mm 90. Length of tool: mm 900. Excavator: Tn ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200 deg.C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID analyzers. A flame resistant PVC coating over a rugged ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed closing completely main flow when senses critical speed ...
-
PremiumManufactured by TABE Hammersbased in SPAIN
Model: MT10. Operating weight: Kg 950. Total length: mm 1.860. Working pressure: bar 150-170. Working flow: L/min 85-110. Blow frequency: bpm 500-665. Diameter of tool: mm 105. Length of tool: mm 1.000. Excavator: Tn ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure rising. Quick relief valve opens due to both pressure rises and falls, fully reducing any pressure ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
Electirc Deluge Valves. Pneumatic Deluge Valves. Pressure Reducing. Pressure Relief. Cavitation Solution. Tecnidro Engineering. Certifications and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities. The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations. The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder ...
-
PremiumManufactured by TABE Hammersbased in SPAIN
Model: MT 18. Operating weight: Kg 1.950. Total length: mm 2.500. Working pressure: bar 160-180. Working flow: L/min 130-145. Blow frequency: bpm 470-620. Diameter of tool: mm 135. Length of tool: mm 1.100. Excavator: Tn ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Railway Motion Control Unit – RMCU is a high-performance strapdown system developed for Railway applications to determine the absolute orientation (Heading, Pitch, and Roll) and motion parameters (Angular Rates and Linear Accelerations) for any Railway Platforms on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order to close the main valve or, alternatively, drains upper chamber in order to open the main ...
-
PremiumManufactured by Reef Industries, Inc.based in USA
Reef Industries, Inc. offers numerous fire retardant materials to meet environmental compliance or safety requirements for critical equipment and work areas. From lightweight to heavy-duty products, Reef Industries can meet your requirements with a fire-retardant cover material specifically tailored to your application. All fire retardant covers are fire rated and pass NFPA 701 Large Scale ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you