Fire Safety Equipment available in Prince Edward Island

Available in Prince Edward Island| Near Prince Edward Island
629 Results found

We couldn't find any results in Prince Edward Island

Here is a list of results available in Prince Edward Island

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Available in: Canada ×

  • Available in: Prince Edward Island ×

Surveillance System Integration

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

Detector Electronics is in business to keep our customers safe and satisfied. By adding surveillance and digital analysis opportunities to an already cutting edge, world class fire and gas system, we enable our customers to be just that – safe and satisfied.

Model NG - Nitroglycerine

by Chematur Engineering AB     based in Karlskoga, SWEDEN

The injector nitration process was developed in Sweden and gave a revolutionary improvement of safety in the risky manufacturing of nitroglycerine and nitro glycol. The process is continuous – the reaction is performed instantaneously in an injector. Chematur Engineering has developed a unique washing/separation centrifuge with low RPM. ...

IPEX BlazeMaster - Standard in Fire Sprinkler Systems

by IPEX     based in Verdun,, QUEBEC (CANADA)

Approved for more applications than any other nonmetallic system on the market, IPEX BlazeMaster is the new industry standard in fire sprinkler systems. BlazeMaster CPVC pipe and fittings are fully approved for use in all NFPA 13 Ligh Hazard applications, in both new and retrofit construction.

Flame Retardant Fabrics

by Ebruzen Textile Industry Trade Co Ltd     based in Bursa, TURKEY

Although no fabric is fireproof, certain textiles resist fire better than other fabrics. All fabrics will burn, some are naturally more resistant to fire than others.

Fire Pump

by Fireguard Safety Equipment Co Ltd.     based in Willenhall, UNITED KINGDOM

Fireguard pumps are designed to provide water to Stand pipe, Sprinkler and Hydrant systems for Fire suppression in Industrial and commercial facilities. Fireguard pumps are design and manufacture together with advanced testing and accreditation to ensure the utmost in equipment reliability.

Model EZ FLOWtm - Fire Sprinkler

by Northwest Pipe Company     based in Vancouver, WASHINGTON (USA)

Contractors and specifiers rely upon our ASTM A795 Grade 'A' compliant products to protect their buildings and the people in them. Long life expectancy, superior hydraulics and consistent end treatments are just a few advantages of why Northwest Pipe's fire sprinkler products are the fire sprinkler pipe of choice.

Model 2T - 3012 - Fire Pump

by Carrozzeria Chinetti S.R.L.     based in Bedero-Valcuvia (VA), ITALY

Centrifugal type, double stage, counter facing impellers for axial thrust balancing, blade type diffusers. Nominal output: 120 m3 /h to 240 m3 /li. Head : 80 to 160 m. Max speed : 2000 to 2800 rpm. Mechanical shaft seal. Shaft head with key or flange. Automatic priming with rotary vanes vacuum pump, electric drive 12 or 24 VDC. Foam mixer 'around ...

Temporary Firewater Systems

by BakerCorp     based in Shafter, CALIFORNIA (USA)

The diagram below shows a temporary firewater system in which water can be stored and supplied during new construction projects in order to meet local fire authority requirements until a permanent municipal system is installed.

Model Elite. Series - Explosives Detection & Identification Kit

by Field Forensics, Inc. (FFI)     based in St. Petersburg, FLORIDA (USA)

The E.L.I.T.E.™ Series, designed for detection and identification of trace explosives and explosives precursors, is field-proven and currently in use with military, police, and commercial security units around the world. There are two main products in the series:

FLAMEX - Deluge Systems

by FLAMEX, Inc.     based in Greensboro, NORTH CAROLINA (USA)

When fire begins in a Dust Collector, Bin or Silo, suppression is normally achieved by flooding or deluging the vessel with water. Prior to installing a system for this purpose, design criteria must be followed (as documented in NFPA 15) to ensure that the system responds effectively for the specific application. Such a system must be fast to ...

Model 7628 - Flame Arrester

by Groth Corporation     based in Stafford, TEXAS (USA)

The Groth 7628 Flame Arrester is designed to inhibit flame and deflagration propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety.

Model X5200 - UVIR Flame Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The evolution continues with the new X5200 UVIR Flame Detector. Approved to FM 3260 (2000), the X5200 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The mounting arrangement allows the UV and IR sensors to monitor the same ...

Elmac Technologies - Model ERV - Emergency Relief Vents & Access Manways

by Elmac Technologies - KnitMesh Technologies     based in North Wales, UNITED KINGDOM

Elmac Technologies range of non-sparking emergency relief vents permit access to low pressure storage tanks and provides emergency venting capacity in the event of fire. These vents are used extensively on bulk storage tanks, including floating roof tanks. Sizes range from 10' (250mm) to 24' (600mm). Typical applications include: bulk storage ...

Lamor - Collapsible Tank

by Lamor Corporation Ab     based in Porvoo, FINLAND

The Lamor Collapsible Tanks fulfill the basic need to temporarily store recovered oil on site. The modular storage tanks are highly flexible for storing recovered oil in remote locations and environments. They can quickly be erected for instant operational use and disassembled compactly for transportation and storage.

Model TNT - Trinitro Toluene

by Chematur Engineering AB     based in Karlskoga, SWEDEN

The continuous TNT process developed by Chematur Engineering (CEAB) has been used in more than 20 projects with excellent safety record and very good performance. Our process includes continuous nitration of toluene or orthonitro-toluene, prewashing of the crude TNT, sellite washing of the crude TNT, post sellite washing of the purified TNT and ...

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

Sprinkler Tanks

by Wolf System GmbH     based in Osterhofen, GERMANY

Sprinkler tanks are used to store the fire fighting water for automatic fire sprinkler systems. We build stand-alone or underground sprinkler tanks. Reinforced concrete round tanks made by WOLF System are excellent for sprinkler water storage purposes.

Slide Gate Fire Hydrants

by Terminal City Iron Works Ltd     based in Langley, BRITISH COLUMBIA (CANADA)

When ordering Terminal City Slide Gate Fire Hydrants.

Model XFP - Addressable Fire Panels

by C-TEC (Computionics Limited)     based in Wigan, UNITED KINGDOM

C-TEC’s XFP range of networkable analogue addressable fire panels offer high performance at a competitive price. Third-party certified to the latest versions of EN54 parts 2 & 4 by the Loss Prevention Certification Board, the XFP is available in three different formats – 1 loop 16 zone, 1 loop 32 zone and 2 loop 32 zone. Up to ...

GFE - Model VALKYRIE CS IP65 - Conventional Wall Mount Sounder/Beacon

by Global Fire Equipment S.A.     based in São Brás de Alportel, PORTUGAL

The VALKYRIE CS IP65 is a wall mounted Conventional Sounder/Beacon with low power consumption. It is specifically designed to be used outdoors. Four different tones are available and selected using DIL switches 1 and 2.Both continuous and pulsing outputs are provided via separate negative supply connections allowing for the presence of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you