AGF Fire Safety Equipment For Health And Safety Available In Palau
-
Manufactured by AGF Manufacturing, Inc.based in USA
Improve your building's appearance, meet NFPA Code, and proactively deter improper maintenance and vandalism of your auxiliary drains (drum drips). Auxiliary drains often become targets for vandals since most auxiliary drains do not provide standard protection against tampering. The COLLECTanDRAIN® Model 5200 provides a consistent, clean appearance and features our patented anti-trip plate ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The AGF RiserPACK Model 8000 commercial riser is a pre-assembled floor control assembly for fire sprinkler systems meeting NFPA 13 requirements. A flow switch, TESTanDRAIN Model 2511, Model 7600 3-way universal valve, and a Model 7500 pressure gauge are assembled to a bronze or steel body. Available in sizes 1-1/4" to 6", orifice sizes K2.8 (3/8") - K25 and thread x thread, thread x groove, or ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Available with Galvanized or Black Steel and an Optional Water Detector Alarm. The Model 5300 COLLECTanDRAIN is a pre-assembled auxiliary drain (low point drain or drum drip) designed to meet NFPA 13 and 25 guidelines addressing proper drainage of a dry fire sprinkler system while offering easy identification and a consistent appearance with the integrated signage. Dual handles allow draining of ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The lightweight and compact Model 1011A is a 300 PSI rated single-handle ball valve with a pressure relief valve designed to provide both the test and express drain functions required for a wet fire sprinkler system. The Model 1011A ball valve eliminates the numerous connections required by the traditional assembly loop saving time, space, and money. The TESTanDRAIN Model 1011A features a ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Model 7000 is a pressure relief valve designed to relieve excess pressure caused by pressure surges or temperature changes in all wet fire sprinkler systems. Model 7000 pressure relief valves comply with NFPA 13 requirements stipulating that a pressure relief valve must be installed on all wet systems and downstream of all pressure-reducing valves. Model 7000s feature a bronze body, stainless ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Model 7000L temporarily locks closed for hydrostatic testing. The Model 7000L is a lockable pressure relief valve specifically designed to relieve excess pressure caused by pressure surges or temperature changes in all wet fire sprinkler systems. Model 7000L pressure relief valves comply with NFPA 13 requirements stipulating that a pressure relief valve must be installed on all wet systems and ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
TESTanDRAIN Model 2511A with Alternative Handle Location, Pressure Relief Valve & Grooved Connections. Model 2511A is a 300 PSI rated single-handed ball valve designed to provide both the test and express drain functions for a wet fire sprinkler system. It saves time, space, and money by eliminating the numerous connections required by the traditional assembly loop. Model 2511A features a ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Lightweight and compact, AGF's Model 1000 TESTanDRAIN is a 300 PSI rated single-handle ball valve that was specifically designed to provide both the test function and the express drain function required by NFPA 25 for a wet fire sprinkler system. In 1986, the Model 1000 revolutionized the industry and replaced the entire floor control loop assembly in one valve. The compact single-handle ball ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's RiserPACK Model 8000 is a pre-assembled floor control assembly designed to meet NFPA 13D requirements for residential fire sprinkler systems. This model includes a flow switch, Inspector'sTEST Model 3011BV, and a Model 7500 pressure gauge. Available in sizes ranging 1" - 2", orifice sizes 3/8" (K2.8) - 5/8" ELO (K11.2), and thread x thread, thread x groove, or groove x groove ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The COLLECTanDRAIN Model 5400 auxiliary drain features a temperature-controlled cabinet to deter system failure due to freezing condensation in a dry fire sprinkler system. The heated and insulated cabinet contains an auxiliary drain with a float switch to monitor water levels and can be wired to a fire panel or BMS for remote notification. Options include galvanized or black pipe, hot operation ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's RiserPACK Model 8511 commercial floor control assembly is pre-assembled with components to meet NFPA 13 requirements for fire sprinkler systems requiring pressure relief. Model 8511 includes a flow switch, TESTanDRAIN Model 2511A with pressure relief valve and trim, Model 7800 3-way universal valve, a Model 7500 pressure gauge, hose test connection, and an optional pressure reducing valve. ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's Model 1211 RemoteTEST saves time and money by allowing the fire sprinkler inspector's test to be performed from a single location through a local switch, auxiliary panel, addressable FAC panel, or a LAN system. The test can be performed on multiple floors or even multiple buildings in minutes. RemoteTEST features a TESTanDRAIN valve with a solenoid and bypass drain loop that allows the ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's Model 1200 RemoteTEST saves time and money by allowing the fire sprinkler inspector's test to be performed from a single location through a local switch, auxiliary panel, addressable FAC panel, or a LAN system. The test can be performed on multiple floors or even multiple buildings in minutes. RemoteTEST features a TESTanDRAIN valve with a solenoid and bypass drain loop that allows the ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
The Commercial RiserPACK Model 8611 is a riser assembly for NFPA 13 fire sprinkler systems and designed to fit into a corner to minimize protruding and comply with ADA Standards. The Model 8000 includes a flow switch, TESTanDRAIN Model 1011A with included pressure relief valve and trim, Model 7600 3-way Universal Valve, and a Model 7500 Pressure Gauge. Available with a steel body in sizes 2"-6", ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF’s TESTanDRAIN Model 2511T is a 300 PSI rated single-handed ball valve designed to provide both the test and express drain functions for a wet fire sprinkler system. It saves time, space, and money by eliminating the numerous connections required by the traditional assembly loop. Model 2511T features a tamper-resistant test orifice and sight glass, a tapped port for system access, a pressure ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's PURGEnVENT Model 7900 Automatic Air Vent (AAV) is a 1" isolation ball valve, barrel strainer, air vent, and purge valve that helps prevent corrosion by automatically releasing trapped air in wet fire sprinkler systems. It meets NFPA 13 code that requires a single air vent on each wet pipe sprinkler system utilizing metallic pipe. The patented design automatically vents air without leaking, ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
TESTanDRAIN Model 2511A with Threaded (NPT) Connection, Multi-Position Handle and Pressure Relief Valve. Model 2511A is a 300 PSI rated single-handed ball valve designed to provide both the test and express drain functions for a wet fire sprinkler system. It saves time, space, and money by eliminating the numerous connections required by the traditional assembly loop. Model 2511A features a ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
AGF's RiserPACK Model 8000 is a pre-assembled, residential floor control assembly that meets the requirements of NFPA 13R for fire sprinkler systems. Pre-assembled components include a flow switch, Inspector'sTEST Model 3011BV, 3-way universal valve, and a Model 7500 pressure gauge. Available in sizes ranging 1-1/4" to 2", orifice sizes from 3/8" (K2.8) - 5/8 ELO (K11.2), and thread x thread, ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Model 1011T is a 300 PSI rated single-handle ball valve with a pressure relief valve and pressure gauge designed to provide both the test and express drain functions required for a wet fire sprinkler system. It features a tamper-resistant test orifice and sight glass, a tapped port for system access, a pressure relief valve, a 3-way globe valve, and a pressure gauge. Available in sizes 3/4" to 2" ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
TESTanSAVE is a water containment system for fire sprinkler systems that recirculates the test water through the system during testing instead of discharging the test water to the outside. NFPA 25 requires regular testing for a sprinkler system to work effectively. By eliminating the introduction of freshly oxygenated water in the system, TESTanSAVE may also assist in slowing the rate of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you