Detonation Arrester (Fire Safety) Equipment Available In Uruguay
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
In-Line Unstable Detonation Arresters with Replaceable Elements and Short-Time-Burn Capability. With E-Flow™ element technology and a patented High Energy Dissipation System (HEDS™), the UCA series of unstable detonation arresters has the best pressure drop performance of any detonation ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
The Elmac Technologies CE-IB in-line unstable detonation arresters are designed to prevent propagation of detonations in gas or vapour mixtures. Detonation arresters are specifically designed for pipelines with a significant distance between the ignition source and the arrester, or for use where ...
-
Manufactured by PROTEGO - Braunschweiger Flammenfilter GmbHbased in GERMANY
The PROTEGO BR/TS-80-IIB3 detonation flame arrester was developed for protecting tankships but can also be used for containers. These devices are especially used on tank ships operating on inland waterways or coastal shipping. The device is installed on the tank or a pipe section connected to the tank with a nominal size of 250 mm / ...
-
Manufactured by PROTEGO - Braunschweiger Flammenfilter GmbHbased in GERMANY
The PROTEGO BR/TS-80-IIB detonation flame arrester was developed for protecting tankships but can also be used for containers. These devices are especially used on tank ships operating on inland waterways or coastal shipping. The device is installed on the tank or a pipe section connected to the tank with a nominal size of 250 mm / ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Detonation Flame Arresters provide protection against flame propagation through piping runs and vapor recovery systems, while allowing maximum flow efficiencies. This design quenches a flame front approaching from either direction, even if it has transitioned to a detonation. The Arresters contain a ...
-
Manufactured by PROTEGO - Braunschweiger Flammenfilter GmbHbased in GERMANY
The PROTEGO DA-CG series of detonation arresters was mainly developed for the North American market and optimized to meet the demands of the US Coast Guard. The devices are symmetrical and offer bidirectional flame arresting for deflagrations, stable and unstable detonations. The speed of incoming detonations is ...
-
Manufactured by Flammer GmbHbased in GERMANY
Inline Detonation Flame Arrester approved to EN ISO 16852. Deflagration = Explosion propagating at subsonic velocity. Detonation = Explosion propagating at supersonic velocity and characterized by a shock wave. Inline detonation flame arrester prevents a flame propagation to the protected side in case of ...
-
Manufactured by Flammer GmbHbased in GERMANY
Inline Detonation Flame Arrester approved to EN ISO 16852 for Short Time Burning. Deflagration = Explosion propagating at subsonic velocity. Detonation = Explosion propagating at supersonic velocity and characterized by a shock wave. Short Time Burning = Stabilized burning for specified time. Inline detonation flame ...
-
Manufactured by Flammer GmbHbased in GERMANY
Liquid Product End of Line Detonation Flame Arrester approved to EN ISO 16852. Deflagration = Explosion propagating at subsonic velocity. Detonation = Explosion propagating at supersonic velocity and characterized by a shock wave. Flame propagation is stopped through used liquid. End of line liquid product detonation flame ...
-
Manufactured by Aktek Technology Engineering Co. Ltdbased in TURKEY
AKTEK TP8100M Flame Arrester is designed to inhibit flame and deflagration propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
The Elmac Technologies DFC in-line deflagration flame arresters are designed to prevent propagation of flames in gas or vapour mixtures. By locating the arrester in close proximity to the potential source of ignition, any flame or explosion is confined to the immediate area. DFC arresters are supplied as complete units ready for ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
The Elmac Technologies SGE-IB in-line deflagration arresters are designed to prevent propagation of flames in gas or vapour mixtures. By locating the arrester in close proximity to the potential source of ignition, any flame or explosion is confined to the immediate area. SGE-IB arresters are supplied as complete units ready for ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
The Elmac Technologies DFB in-line deflagration arresters are designed to prevent propagation of flames in gas or vapour mixtures. By locating the arrester in close proximity to the potential source of ignition, any flame or explosion is confined to the immediate area. DFB arresters are supplied as complete units ready for direct ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
Elmac Technologies MB-IB series of microbore flame arresters is specifically designed for the protection of gas sampling and analysis equipment where flammable vapours are present. Many other applications involving small bore pipework can be protected from explosion risk using microbore ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The 94390 Arrester Bank EZ-Out has been designed to assist plant personnel for the inspection and removal of spiral wound Flame, Deflagration & Detonation Arrester Tube Banks. The 94390 is designed for use with arresters installed in "In-Line" process piping for the Wastewater, Oil & Gas, Chemical, Petrochemical, and ...
-
Manufactured by Conveco Srlbased in ITALY
to provide protection against external ignition sources; deflagration or detonation arresters located at or near combustion burners and flare stacks. Flame arresters supplied by PROGECO are ATEX ...
-
Manufactured by SGB GmbHbased in GERMANY
Vacuum leak detector explosion protected electronically operating (VLXE ..), partially explosion protected with integrated pump, for the installation outside of Ex-areas, weatherproof design, with 34 mbar alarm pressure with detonation flame arresters in suction and exhaust line for one above or underground double-walled tank with suction ...
-
Manufactured by Flammer GmbHbased in GERMANY
Inline Deflagration Flame Arrester approved to EN ISO 16852. Deflagration = Explosion propagating at subsonic velocity. The flame arrester prevents a flame propagation to the protected side in case of deflagration of explosive vapor-air or gas-air ...
-
Manufactured by Flammer GmbHbased in GERMANY
Flame Arrester approved to DIN EN ISO 16852 as inline deflagration flame arrester and for Endurance Burning. Deflagration = Explosion propagating at subsonic velocity. Endurance Burning = Stabilized burning for unlimited time. Inline deflagration flame arresters are fitted with two pipe connections, one on each side of the flame ...
-
based in USA
Part of a complete system that incorporates a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas in a single step, providing bubble-tight shut-off and low maintenance. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you