explosion protection Equipment available in Equatorial Guinea

Available in Equatorial Guinea| Near Equatorial Guinea
78 Results found

We couldn't find any explosion protection equipment in Equatorial Guinea

Here is a list of results available in Equatorial Guinea

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: explosion protection ×

  • Available in: Africa ×

  • Available in: Equatorial Guinea ×

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Explosion Protection Valve

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

HazPak - Model CAT C4.4 NA - Explosion Protection Engine

by Pyroban Ltd     based in West Sussex, UNITED KINGDOM

The C4.4 NA HazPak is a naturally aspirated explosion protection engine designed for safe use in ATEX Zone 2 hazardous locations with its Gas Group IIA and T3 Temperature class certification. This explosion protection engine provides up to 86 brake horsepower at 2200rpm and is suitable for a range of well service applications such as compressor ...

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

Hygienic Explosion Vent

by Elfab Limited     based in North Shields, UNITED KINGDOM

Dusty conditions commonly associated with the storage and handling of grains and powders can potentially lead to dangerous explosions. Within the food-processing, beverage and pharmaceutical sectors, ensuring that the explosion protection solution is also suitable for sanitary applications is an added consideration. The specially designed ...

ATEX - Model HWAIS - Hot Water Advanced Inerting System

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The Atex HWAIS is an innovative solution to the complex problem of non-contaminating explosion suppression in large volumes. Superheated water is released under pressure to quickly disperse microscopic droplets over a large area creating an inert atmosphere which immediately extinguishes flame.

ATEX - TV Explosion Door

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Door from ATEX is a high performance explosion venting solution for aggressive environments. It provides economical explosion relief and prevents secondary fire damage from oxygen intake by rapidly re-closing after the explosion is vented. We also offer a light weight door for building protection.

UV Flame Detector

by Fireguard Safety Equipment Co Ltd.     based in Willenhall, UNITED KINGDOM

FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS ...

ATEX - Nozzle Systems

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

ATEX offers a variety of nozzle systems, so that the required functionality of the explosion suppres-sion pressure system can be ensured in each individual case. The choice of the right system, however, is always made in the light of the particular process concerned. The ATEX nozzle systems are particu-larly used in fields where hygienic ...

Model Elite. Series - Explosives Detection & Identification Kit

by Field Forensics, Inc. (FFI)     based in St. Petersburg, FLORIDA (USA)

The E.L.I.T.E.™ Series, designed for detection and identification of trace explosives and explosives precursors, is field-proven and currently in use with military, police, and commercial security units around the world. There are two main products in the series:

Explosion Diverter

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Diverter from Atex is a mechanical explosion isolation device which protects ductwork and attached vessels by venting flame and pressure to a safe area.

Model 3121 SRE - Explosion Vents

by CV Technology, Inc.     based in Jupiter, FLORIDA (USA)

Explosion vents offer a passive and economical means of explosion mitigation.  Each explosion vent is precisely designed to burst at a given pressure to maintain the structural integrity of the protected equipment. Vents come in a variety of dimensions and models.  The CV Technology standard vent is our TLFG model. The TLFG explosion ...

Interceptor - Model 3115 HRD 8L-20L-50L - Explosion Suppression System

by CV Technology, Inc.     based in Jupiter, FLORIDA (USA)

The Interceptor-HRD explosion suppression system is designed to provide an active method to protect process equipment from a dust explosion hazard.  The principle of operation for the Interceptor-HRD system is timely detection of the pressure rise during the initial stage of an explosion, followed by fast injection of an extinguishing agent.

Explosion-, Spark and Flame Isolation

by Rembe GmbH Mess- und Regeltechnik     based in Brilon, GERMANY

The EXKOP® system provides safe, economic and easy explosion-, spark and flame front isolation. The quench valves protect interconnected equipment by high speed closure of a fast acting pinch valve. The quench valve is triggered by a 100 % reliable signal from the maintenance free triple-section bursting disc, the Q-Rohr®-3 or by IR- ...

Det-Tronics - Model SmokeWatch U5015 - Explosion-Proof Smoke Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The Det-Tronics SmokeWatch U5015 Explosion-Proof Smoke Detector is a Class I Division 1, 2 and Zone 1 explosion-proof rated smoke detector that is suitable for hazardous, industrial, and commercial applications. This smoke detector has unique design that operates effectively in both smoldering and rapidly growing fires. The photoelectric operation ...

Training Network - Model 2708-DV - Flammables and Explosives in the Laboratory

by The Training Network     based in Durham, NORTH CAROLINA (USA)

Flammables and explosives are some of the most dangerous materials used in a laboratory. When working with these substances, employees need to know their characteristics, as well as how to prevent accidents and injuries when using them. This training program discusses the nature of flammable and explosive materials, as well as hazards associated ...

Explosion Vent Systems

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

Explosion Vent Systems are designed to minimize damage to process vessels, ducts, and other industrial structures, in the event of a deflagration involving combustible materials. These explosion vent panels are designed to ruptures at a predetermined pressure, to allow the fireball and explosive pressure to vent into a safe area. IEP Technologies ...

Explosion Isolation Systems

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

Explosion isolation systems are designed to detect an explosion in a process vessel, and then create a barrier that reduces the risk of the flame/explosion propagation to other interconnected equipment. Such explosion propagation is likely to give rise to an enhanced (more intense) explosion in any connected vessel than would be expected from a ...

xWatch - Model X7050 - Explosion-Proof Camera

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The xWatch explosion-proof surveillance camera provides a high-resolution color image, real-time viewing, and pre/post event analysis. The xWatch camera is designed specifically for remote, high-risk, and hard-to-access areas.

BLITZDUCTOR - Model XT Ex (i) - Protection Modules for Use in Hazardous Areas

by DEHN SÖHNE GmbH Co. KG.     based in Neumarkt, GERMANY

Blitzductor XT EX is a pluggable and universal four-pole DIN rail mounted surge arrester designed for the most stringent requirements on the availability of intrinsically safe measuring and control circuits and bus systems. Regarding intrinsic safety, the arrester is considered unearthed and its self-inductance and self-capacitance are negligibly ...

Need help finding the right suppliers?

Let the XPRTs do the work for you