explosion protection Equipment available in South Dakota

Available in South Dakota| Near South Dakota
141 Results found

We couldn't find any explosion protection equipment in South Dakota

Here is a list of results available in South Dakota

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: explosion protection ×

  • Available in: USA ×

  • Available in: South Dakota ×

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Explosion Protection Valve

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

HazPak - Model CAT C4.4 NA - Explosion Protection Engine

by Pyroban Ltd     based in West Sussex, UNITED KINGDOM

The C4.4 NA HazPak is a naturally aspirated explosion protection engine designed for safe use in ATEX Zone 2 hazardous locations with its Gas Group IIA and T3 Temperature class certification. This explosion protection engine provides up to 86 brake horsepower at 2200rpm and is suitable for a range of well service applications such as compressor ...

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

ATEX - TV Explosion Door

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Door from ATEX is a high performance explosion venting solution for aggressive environments. It provides economical explosion relief and prevents secondary fire damage from oxygen intake by rapidly re-closing after the explosion is vented. We also offer a light weight door for building protection.

Hygienic Explosion Vent

by Elfab Limited     based in North Shields, UNITED KINGDOM

Dusty conditions commonly associated with the storage and handling of grains and powders can potentially lead to dangerous explosions. Within the food-processing, beverage and pharmaceutical sectors, ensuring that the explosion protection solution is also suitable for sanitary applications is an added consideration. The specially designed ...

ATEX - Model HWAIS - Hot Water Advanced Inerting System

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The Atex HWAIS is an innovative solution to the complex problem of non-contaminating explosion suppression in large volumes. Superheated water is released under pressure to quickly disperse microscopic droplets over a large area creating an inert atmosphere which immediately extinguishes flame.

UV Flame Detector

by Fireguard Safety Equipment Co Ltd.     based in Willenhall, UNITED KINGDOM

FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS ...

ATEX - Nozzle Systems

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

ATEX offers a variety of nozzle systems, so that the required functionality of the explosion suppres-sion pressure system can be ensured in each individual case. The choice of the right system, however, is always made in the light of the particular process concerned. The ATEX nozzle systems are particu-larly used in fields where hygienic ...

Model Elite. Series - Explosives Detection & Identification Kit

by Field Forensics, Inc. (FFI)     based in St. Petersburg, FLORIDA (USA)

The E.L.I.T.E.™ Series, designed for detection and identification of trace explosives and explosives precursors, is field-proven and currently in use with military, police, and commercial security units around the world. There are two main products in the series:

BICERA Revolution - Explosion Relief Valve

by Penn-Troy Manufacturing, Inc.     based in Troy, PENNSYLVANIA (USA)

A new twist on an old classic, the BICERA Revolution™ Valve protects engine room personnel and parts from dangerous exhaust temperatures and flame with improved performance and a lightweight design. It may be small, but it is packed with performance.

Explosion Diverter

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Diverter from Atex is a mechanical explosion isolation device which protects ductwork and attached vessels by venting flame and pressure to a safe area.

Model 3121 SRE - Explosion Vents

by CV Technology, Inc.     based in Jupiter, FLORIDA (USA)

Explosion vents offer a passive and economical means of explosion mitigation.  Each explosion vent is precisely designed to burst at a given pressure to maintain the structural integrity of the protected equipment. Vents come in a variety of dimensions and models.  The CV Technology standard vent is our TLFG model. The TLFG explosion ...

Scientific Dust Collectors - Explosion Vents

by Scientific Dust Collectors     based in Alsip, ILLINOIS (USA)

At SDC, we take combustible dust very seriously. Providing a safe and accurate solution to your combustible dust problem is our highest priority. At SDC we are able to provide explosion vent sizing and recommendations for your specific application according to the latest regulations provided by the National Fire Protection Agency (NFPA) and the ...

Interceptor - Model 3115 HRD 8L-20L-50L - Explosion Suppression System

by CV Technology, Inc.     based in Jupiter, FLORIDA (USA)

The Interceptor-HRD explosion suppression system is designed to provide an active method to protect process equipment from a dust explosion hazard.  The principle of operation for the Interceptor-HRD system is timely detection of the pressure rise during the initial stage of an explosion, followed by fast injection of an extinguishing agent.

Explosion Suppression Systems

by Fire Equipment Inc.     based in Medford,, MASSACHUSETTS (USA)

Explosion Suppression technology is a complex field involving a wide variety of systems, chemistry and agents. Fire Equipment's professional staff is available to help assess your needs and select the most appropriate explosion suppression system. We provide solution-based designs so you can expect an explosion protection strategy based on your ...

Training Network - Model 2708-DV - Flammables and Explosives in the Laboratory

by The Training Network     based in Durham, NORTH CAROLINA (USA)

Flammables and explosives are some of the most dangerous materials used in a laboratory. When working with these substances, employees need to know their characteristics, as well as how to prevent accidents and injuries when using them. This training program discusses the nature of flammable and explosive materials, as well as hazards associated ...

Explosion Vent Systems

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

Explosion Vent Systems are designed to minimize damage to process vessels, ducts, and other industrial structures, in the event of a deflagration involving combustible materials. These explosion vent panels are designed to ruptures at a predetermined pressure, to allow the fireball and explosive pressure to vent into a safe area. IEP Technologies ...

Explosion-, Spark and Flame Isolation

by Rembe GmbH Mess- und Regeltechnik     based in Brilon, GERMANY

The EXKOP® system provides safe, economic and easy explosion-, spark and flame front isolation. The quench valves protect interconnected equipment by high speed closure of a fast acting pinch valve. The quench valve is triggered by a 100 % reliable signal from the maintenance free triple-section bursting disc, the Q-Rohr®-3 or by IR- ...

Explosion Proof Elevators

by McDonough Elevators     based in Austell, GEORGIA (US) (USA)

Explosion proof elevators conform to ANSI 17.1, ANSI a10.4, and EN 81.1 standards where there is a risk of explosive gases or dusts being present. We offer NEC and ATEX hazardous-area compliant industrial elevators to protect equipment in hazardous locations. DNV and ABS certifications are available. We have standard options suitable for NEC Class ...

Need help finding the right suppliers?

Let the XPRTs do the work for you