We couldn't find any explosion protection equipment suppliers or service providers located in Wyoming

Here is a list of equipment results with suppliers serving Wyoming

explosion protection Equipment available in Wyoming

  • Model NFPA 6 - Explosion Protection

    NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

    By IEP Technologies based in Marlborough, MASSACHUSETTS (USA).

  • Explosion Protection Valve

    The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

    By ATEX Brand- und Explosionsschutz GmbH based in Moehnesee, GERMANY. from Explosion Isolation System Product line

  • HazPak - Model CAT C4.4 NA - Explosion Protection Engine

    The C4.4 NA HazPak is a naturally aspirated explosion protection engine designed for safe use in ATEX Zone 2 hazardous locations with its Gas Group IIA and T3 Temperature class certification. This explosion protection diesel engine provides up to 70hp at 2200rpm and is suitable for a range of well service applications such as compressor sets, ...

    By Pyroban Ltd based in West Sussex, UNITED KINGDOM. from EX Power Systems- Powerpacks Product line

  • Premium

    Model 125 - Explosion-Proof Smoke Monitor

    In the event of a fire in a building or other structure, such as an oil rig, Health and Safety regulations require that immediate action be taken to prevent the ingress of smoke and fume into air-conditioning and ventilation ducts. The Model 125 explosion-proof smoke monitor is specifically designed to be mounted in ventilation ducts and to comply ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Safety & Performance Product line

  • Model BS 7 - Spark Detection & Extinguishment Systems

    GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

    By GreCon Greten GmbH & Co. KG based in Alfeld-Hannover, GERMANY. from Fire and Explosion Protection Product line

  • ATEX - Vigilex Flameless Venting Panels Systems

    The Vigilex Flameless Venting Panels systems from Atex, offer a safe and effective venting solution for explosion protection of indoor and outside locations, where a safe area cannot be established, near other hazardous processes or in personnel areas. It uses a stainless steel mesh filter to quench vented explosions and arrest flames. ...

    By ATEX Explosion Hazards Ltd. based in Warrington, UNITED KINGDOM. from Explosion Venting Product line

  • ATEX - Explosion Vent Panels

    ATEX explosion vent panels are designed to provide cost-effective pressure relief, preventing explosion overpressure damage to your plant. Letting off pressure! Controlled weakness for more safety. COST-EFFECTIVE, VERSATILE AND ROBUST. Explosion venting is by far the most innate protection system for most plant design as it is perceived as ...

    By ATEX Explosion Hazards Ltd. based in Warrington, UNITED KINGDOM. from Explosion Venting Product line

  • ATEX - Quick-Sliding Valve

    The Atex Quick-Sliding Gate Valve (Slam-Shut Valve) is a fast-acting valve, capable of stopping a fire or explosion from travelling through pipelines. The valve is used with a controller and a spark detection or other explosion detection device to form an active fire and explosion protection system.

    By ATEX Explosion Hazards Ltd. based in Warrington, UNITED KINGDOM. from Explosion Isolation Product line

  • ATEX - Explosion Diverter

    The TV Explosion Diverter from ATEX is a mechanical explosion isolation device which protects duct work and associated vessels by venting flame and pressure to a safe area thus minimising the detrimental effects of pressure piling and flame jet ignition.

    By ATEX Explosion Hazards Ltd. based in Warrington, UNITED KINGDOM. from Explosion Isolation Product line

  • Hygienic Explosion Vent

    Dusty conditions commonly associated with the storage and handling of grains and powders can potentially lead to dangerous explosions. Within the food-processing, beverage and pharmaceutical sectors, ensuring that the explosion protection solution is also suitable for sanitary applications is an added consideration. The specially designed ...

    By Elfab Limited based in North Shields, UNITED KINGDOM. from Explosion Vents Product line

  • Model EPL-SL-10 - Explosion Proof String Lights

    The Larson Electronics EPL-SL-10 Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.

    By Larson Electronics LLC based in Kemp, TEXAS (USA). from Explosion Proof Lights Product line

  • ATEX - Dry Chemical Explosion Suppression System

    ATEX’s Dry Chemical-based Advanced Explosion Suppression Systems offer multi-purpose, high efficiency suppressor, discharging non-toxic flame-extinguishing powder into the protected plant using fast acting non-explosively actuated valves.

    By ATEX Explosion Hazards Ltd. based in Warrington, UNITED KINGDOM. from Explosion Suppression Systems Product line

  • Model Elite. Series - Explosives Detection & Identification Kit

    The E.L.I.T.E.™ Series, designed for detection and identification of trace explosives and explosives precursors, is field-proven and currently in use with military, police, and commercial security units around the world. There are two main products in the series:

    By Field Forensics, Inc. (FFI) based in St. Petersburg, FLORIDA (USA). from Explosives Detection Kit Product line

  • UV Flame Detector

    FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS ...

    By Fireguard Safety Equipment Co Ltd. based in Willenhall, UNITED KINGDOM. from Explosion Proof Devices Product line

  • ATEX - Nozzle Systems

    ATEX offers a variety of nozzle systems, so that the required functionality of the explosion suppres-sion pressure system can be ensured in each individual case. The choice of the right system, however, is always made in the light of the particular process concerned. The ATEX nozzle systems are particu-larly used in fields where hygienic ...

    By ATEX Brand- und Explosionsschutz GmbH based in Moehnesee, GERMANY. from Explosion Suppression System Product line

  • BICERA Revolution - Explosion Relief Valve

    A new twist on an old classic, the BICERA Revolution™ Valve protects engine room personnel and parts from dangerous exhaust temperatures and flame with improved performance and a lightweight design. It may be small, but it is packed with performance.

  • BICERA - Crankcase Explosion Relief Valve

    For over 60 years, the BICERA design has been put through rigorous testing and has gained recognition as the safest valve on the market. Available in a range of sizes, our crankcase explosion relief valves trap flame and direct hot exhaust gases down and away from engine room personnel. Penn-Troy is the only crankcase explosion relief valve ...

  • Model 3121 SRE - Explosion Vents

    Explosion vents offer a passive and economical means of explosion mitigation.  Each explosion vent is precisely designed to burst at a given pressure to maintain the structural integrity of the protected equipment. Vents come in a variety of dimensions and models.  The CV Technology standard vent is our TLFG model. The TLFG explosion ...

    By CV Technology, Inc. based in Jupiter, FLORIDA (USA).

  • Scientific Dust Collectors - Explosion Vents

    At SDC, we take combustible dust very seriously. Providing a safe and accurate solution to your combustible dust problem is our highest priority. At SDC we are able to provide explosion vent sizing and recommendations for your specific application according to the latest regulations provided by the National Fire Protection Agency (NFPA) and the ...

    By Scientific Dust Collectors based in Alsip, ILLINOIS (USA). from Other Products Product line

  • Interceptor - Model 3115 HRD 8L-20L-50L - Explosion Suppression System

    The Interceptor-HRD explosion suppression system is designed to provide an active method to protect process equipment from a dust explosion hazard.  The principle of operation for the Interceptor-HRD system is timely detection of the pressure rise during the initial stage of an explosion, followed by fast injection of an extinguishing agent.

    By CV Technology, Inc. based in Jupiter, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you