Fire Sprinkler (Fire Safety) Equipment Available In Tuvalu
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
BlazeMaster pipe and fittings – Approved for more applications than any other non-metallic ...
-
Manufactured by Tyco Fire Protection Productsbased in USA
TYCO CPVC Pipe and Fittings pro-duced by Johnson Controls are designed exclusively for use in wet pipe automatic fire sprinkler systems. The TYCO CPVC Pipe and Fittings are produced from BLAZEMASTER CPVC compound that is a specially developed thermoplastic compound composed of post chlorinated polyvinyl chloride (CPVC) resin and state of the ...
-
Manufactured by The Hiller Companiesbased in USA
Corrosion in fire sprinkler systems is a serious problem. Oxidation is the most common cause of corrosion. When oxygen is trapped in the system, it dissolves into water and reacts with the surface of the piping. This causes iron oxide debris, which reduces systems performance. While corrosion activity in fire sprinkler systems is ...
-
Manufactured by Getechbased in INDIA
The First ISI Mark Sprinkler in INDIA. Approval ISI & C.B.R.I. Roorkee. GETECH/DSS Sprinklers available in sizes of 15mm & 25mm in Pendent, Upright & Side Wall Type. ...
-
based in GERMANY
Sprinkler systems are used for automatic fire fighting, to protect life and property. The operating principle is straightforward and reliable. It has the largest share of the market for water extinguishing systems. The consistent use of VdS-approved components and careful processing ensures maximum safety and compatibility with ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Specially formulated for fire sprinkler systems, IPEX BlazeMaster pipe and fittings are made from post-chlorinated polyvinyl chloride (CPVC) and is fully approved for use in NFPA 13 Light Hazard applications in both new and retrofit construction including: High buildings, including apartments and hotels. Schools and institutions. ...
-
Manufactured by Tyco Fire Protection Productsbased in USA
LFP Antifreeze is formulated to help ensure fire sprinkler systems operate as intended by allowing flow in temperatures as low as -10°F (-23,3°C). The solution is compatible with most sprinkler system materials, including CPVC, and can be more cost-effective, as well as easier to install and maintain, than alternate freeze ...
-
Manufactured by REHAU Ltdbased in GERMANY
A FIREPEX® residential fire sprinkler system is designed to prevent flashover (total involvement of the fire) in the room of fire origin, where sprinklered, and to improve the chance for occupants to escape or be evacuated. FIREPEX fittings and RAUPEX® UV Shield pipe can be used to install these systems, ...
-
Manufactured by TT Electronicsbased in UNITED KINGDOM
The Shunt Gapmeter Model LPCB is approved for regular monitoring and testing of sprinkler systems by the LPCB, Loss prevention Certification Board, under their ‘Rules for Automatic Sprinkler Installations’, in the UK, and by many equivalent organizations in other countries. Model LPCB provides a compact, robust, direct ...
-
Manufactured by Hydro(Gen) Innovations, Inc.based in USA
system when flushing fire sprinkler cross mains for obstructions, sediment and suspended solids in wet delivery systems and the dangerous metal ZINC found in trapped water in testing and draining galvanized piping of special hazard pre-action and dry systems. ...
-
Manufactured by Aquathermbased in USA
If you’re searching for a fire sprinkler pipe with virtually leak-free connections and long-term corrosion resistance, aquatherm red is the best choice for protecting property and lives. To ensure maximum performance and value in fire sprinkler applications, we have modified our patented resin to create Fusiolen PP-R FS, ...
-
Manufactured by Hydro(Gen) Innovations, Inc.based in USA
The EcoSmart XM Filter is a practical solution for regulatory compliance and environmental leadership. Obstructions identified inside cross-main inspections during NFPA 25 requirements can render a fire sprinkler system inoperable. The current method to deal with this problem is to attach a hose at the end of the main and run hoses ...
-
Manufactured by Sinco Fire and Security Co., Limitedbased in CHINA
Fire sprinkler is an important part of wet-type auto spraying system. It is usually installed inside the building and structures with light fire danger, medium fire danger and heavy fire danger, such as workshop, warehouse, hotel, shop, recreational place, hospital, cinema, office building and garage. The ...
-
Manufactured by Procompactor Waste Management Equipment & Vehiclesbased in TURKEY
Fire Truck Sprinklers Aid Vehicles are used for safety purposes such as if a fire truck’s water tank is depleted, the sprinklers can be used to put out any fires in the area. Sprinklers allow firefighters to stay at a safe distance while ensuring that they are not neglecting any areas that ...
-
Manufactured by Eusebi Impianti S.r.l.based in ITALY
The automatic sprinkler fire extinguishing system is made up of a set of automatic extinguishers called sprinklers and the relative supply piping containing water, compressed air or ambient air (deluge systems) and control valves fed by water supply sources of suitable flow rate and autonomy. They also include a test device and an alarm ...
-
Manufactured by UNITED Fire Systemsbased in USA
SPRINKLER-PAC™ is a fully assembled dry-pipe or deluge sprinkler valve fire suppression system, including dry-pipe or deluge valve and trim, providing one complete zone of dry-pipe or deluge water sprinkler fire protection. All components are contained in two (2) powder-coated steel enclosures assembled one ...
-
Manufactured by Rolland Sprinklersbased in FRANCE
Thread F (d"): 1/2". Finish: Chrome. Material: Steel. e (mm): 6. ØD (mm): ...
-
Manufactured by Rolland Sprinklersbased in FRANCE
Sprinkler thread: 1/2’’. Finish (RAL): Chrome. Material: Steel. Ød (mm): 20,3 . ØD (mm): ...
-
Manufactured by Rolland Sprinklersbased in FRANCE
Escutcheon specially designed for INSULATING PANELS. Does not scratch the panels during installation. Suitable with the escutcheon seal ref. KFJMR. Chrome finish, white coated INOX ...
-
Manufactured by AGF Manufacturing, Inc.based in USA
Model 7000L temporarily locks closed for hydrostatic testing. The Model 7000L is a lockable pressure relief valve specifically designed to relieve excess pressure caused by pressure surges or temperature changes in all wet fire sprinkler systems. Model 7000L pressure relief valves comply with NFPA 13 requirements stipulating that a pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you