Only show results available in Virginia? Ok

Flame Detection equipment for Health and Safety

  • Premium

    Polaris - Model FID - Portable Flame Ionization Detection Analyzer

    POLARIS FID is an on-site portable TOC Analyser for Stack Emissions in compliance with EN12619, EN13526 and EPA METHOD 25A. It is TÜV Rheinald certified. It is a fully portable instrument because it incorporates everything needed for the analysis.

    By Pollution Srl based in Budrio (Bologna), ITALY. from Other Products Product line

  • Premium

    PORTAFID - Model M3/M3K - Portable Flame Ionisation Detector

    Flame ionisation detectors for inspecting underground gas lines. The PORTAFID M3 / PORTAFID M3K portable flame ionisation detector is the perfect tool for above-ground inspections of underground gas lines. It is reliable and highly accurate, resistant to interference from moisture and only responds selectively to hydrocarbons. The PORTAFID M3 ...

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY. from Gas Leak Detection Outdoors Product line

  • Paragon - Model 105F1-1 - Flame Scanner

    Type 105F1-1 Integrated Flame Scanner and Temperature Analyzer. Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learned vs. Stored Curve Fitting.

    By Fireye Inc. based in Derry, NEW HAMPSHIRE (USA). from Integrated Flame Detection Product line

  • Model FS-24X - Flame Detector

    QuadBand™ Triple IR Fire & Flame Detector - Triple IR + Visible Bands

    By Sensidyne based in St. Petersburg, FLORIDA (USA). from Fixed Gas Detection Product line

  • Model CC02A Serial - Communications Module

    The CC02A Communications Card facilitates serial communications between each module in a Zero Two Series Flame and Gas Detection System and an external host computer, which allows fast access to operational and setup data registers. It supports a Burst Read feature that returns all registers of a module in a single transmission.

    By General Monitors based in Lake Forest, CALIFORNIA (USA). from Fire and Gas Detection Systems Product line

  • Systems & Controllers - MDXI

    This modular controller covers most systems from 5 to 100 channels. Combined with the full Simtronics range of gas and flame detectors, the MDXI forms a basis for reliable alarm collection and easy maintenance.

    By Simtronics SAS based in Aubagne Cedex, FRANCE.

  • SigniFire - Model IP - Video Flame and Smoke Detection Camera

    SigniFire IP Video Smoke detection camera, combines the enhanced resolution and picture clarity of a standard network camera with built-in fire, smoke and motion detector capabilities. The detection events are instantly reported to the Digital Video Management (DVM) system over a standard network connection and/or communicated directly to the ...

    By Fike based in Blue Springs, MISSOURI (USA). from Fire Alarm Systems Product line

  • Model FSM-IP - Network Video Smoke and Flame Detection Recorder

    A scalable, network video recorder with video management software, each FSM-IP is designed to support up to 32 SigniFire IP network, flame detecting cameras: Constantly records video streams onto internal hard disk. Customizable storage space to meet application needs. Provides monitoring of live videos. With the scalable FSM-IP, multiple servers ...

    By Fike based in Blue Springs, MISSOURI (USA). from Fire Alarm Systems Product line

  • SharpEye - Model 20/20MI- IR (IR3) - Mini Triple Flame Detector

    The 20/20MI is an economical and compact Triple IR (IR3) Flame Detector in a rugged stainless steel housing. It is available in either general purpose non-Ex approved or intrinsically safe approved (EExia) format. It retains all the benefits of IR3 technology - long distance detection (up to 130ft / 40m) along with highest immunity to false ...

    By Desu Systems BV based in Berkel en Rodenrijs, NETHERLANDS. from Flame Detection Product line

  • HazardWatch - Fire and Gas System

    The HazardWatch Fire and Gas Detection System is an innovative, modular system that combines highly reliable programmable logic controller (PLC) technology with General Monitors' advanced gas and flame field devices. It is highly scalable, making it suitable for small systems to large plant-wide applications. Offering intelligence, flexibility and ...

    By General Monitors based in Lake Forest, CALIFORNIA (USA). from Fire and Gas Detection Systems Product line

  • Model 3001 - Flame Amplifier

    The flame scanner 3001 is a system plug-in unit of the 3000 line, which, in connection with the flame detectors of the system, is providing fullscale flame monitoring for any burner output, fuel, and combustion process. The flame monitoring system 3000 is tested by TÜV in accordance with EN298:2012 and approved according to DIN DVGW. It meets ...

    By BFI Automation GmbH based in Ratingen, GERMANY.

  • UltraSonic - Model EX-5 - Gas Leak Detector

    Instantly detect pressurized gas leaks with this high-precision, omni-direction device. Features advanced acoustic detection technology. Works even when traditional methods of detection are unsuitable or dependent on ventilation. The patented self-test system provides fail-safe operation. Functions in extreme weather conditions, making it ideal ...

    By Mine Safety Appliances Co (MSA) based in Cranberry Township, PENNSYLVANIA (USA). from Fixed Gas & Flame Detection Product line

  • Model FL10 - Flame Detector Single Channel

    The flame detector FL10 is capable of detecting within a few seconds a flame produced by a fire within its field view. It finds particular application in the places where it is assumed that a fire can develop quickly such example in the stores of petroleum products, paints, plastics, alcohols, etc.. The operating principle is based on the ...

    By EDS Electronic Detection Systems based in San Giovanni Lupatoto, Verona, ITALY.

  • Mitsubishi Hitachi Power Systems - Model IR-S - Infrared Flame Detector: Control Systems

    Recently, due to diversified boiler fuels and low NOx (nitrogen oxide) operation, it is becoming difficult to monitor a burner flame using the conventionalultraviolet or infrared light detection methods. Based on this change in the business environment, MHPS has improved on the conventional IR type flame detector to create a new type of flame ...

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA).

  • Model FL3100H - UV/IR Flame Detector

    The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. Configurations with dual Modbus ...

    By General Monitors based in Lake Forest, CALIFORNIA (USA). from Flame Detectors Product line

  • Model F130 - Multi-Spectrum IR Flame Detector

    The SST Model F130 Multi-Spectrum IR Flame Detector is a high performance and high reliability self-contained unit designed for hazardous applications.  5 Year Warranty and proudly Made in the USA.

    By Safety Systems Technology, Inc. (SST) based in Laguna Hills, CALIFORNIA (USA). from Flame Detectors Product line

  • Model FS301 - Flame Simulator

    The MICROPACK FS301 Flame Simulator is designed to test the correct operation of Visual Flame detectors. The FS301 Flame Simulator produces a unique flame pattern that is recognised by the visual flame detector and produces an alarm output. Based on a unique flame simulation technology developed by Micropack the FS301 generates an accurate flame ...

    By Micropack Detection (Americas) Inc. based in Fort Collins, COLORADO (USA). from Flame Simulation Product line

  • Flame Ionization Sensors

    Flame Ionization detectors can be extremely accurate and are used to measure concentrations of hydrocarbons and other solvents within a gas. They are detected by burning them in an air-hydrogen flame - which creates high and precisely measurable levels of Ionization. The ionization occurs as a result of heating the carbon atoms present in the ...

    By Versaperm Limited based in Maidenhead, UNITED KINGDOM. from Hydrogen Sensors Product line

  • UV Flame Detector

    FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS ...

    By Fireguard Safety Equipment Co Ltd. based in Willenhall, UNITED KINGDOM. from Explosion Proof Devices Product line

  • Model FS20X - Fire Sentry Flame Detector

    Part of the FSX family of electro-optical flame detectors, the FS20X represents a quantum leap in integrating infrared and ultraviolet sensing technologies. Based on the foundation of the highly successful and reliable Fire Sentry SS4 Flame Detector, the Fire Sentry FS20X Flame Detector represents a quantum leap in integrating Infrared and ...

    By Honeywell Analytics, Inc. based in Lincolnshire, ILLINOIS (USA). from Industrial Flame and Gas Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you