Flame Detection Equipment For Health And Safety In Africa
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
This powerful and growing global industry now has the attending facilities for Synthetic Fuels or Bio-Fuels production. For this derivative product BWB Technologies offers a hybridized Flame Photometer we have named Syn Fuels. The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
UniSolv® for Organic Trace Analysis - Large retention time range (even low-boiling substances can be reliably detected) - Highest possible purity and minimal signal-to-noise ratio - Best possible batch consistency avoiding analysis repetition, time and cost saving - Specified for GC-Electron Capture Detector (ECD), GC-Flame Ionization Detector (FID) and Mass Spectroscopy (MS) No matter which ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s advanced controls and automation systems provide the safest, most efficient, and highly reliable operation while integrating smoothly into existing plant operations. From new equipment to upgrades and retrofits, our systems utilize the latest in Programmable Logic Controller (PLC) based controls, touch screen interfaces, and remote ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Solution for Total THC Measurements: Gasmet Flame Ionization Detector (GFID) is designed for continuous total hydrocarbon (THC) measurements. GFID analyzer offers a TÜV certified solution (QAL1) for measuring pollutants from hot, wet and corrosive gas ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements. The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Flame ionisation detectors for inspecting underground gas lines. The PORTAFID M3K portable gas detector is the perfect tool for above-ground inspections of underground gas lines. It is reliable and highly accurate, resistant to interference from moisture and only responds selectively to hydrocarbons. The PORTAFID M3K features an 0.4 l fuel gas bottle, which is carried separately on the user's ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
The BWB XP is the first and only 5 channel flame photometer with simultaneous detection and display of all 5 elements. The BWB XP was designed from the ground up, using new, innovative and modern technology to give unsurpassed levels of accuracy, usability and reliability while significantly reducing analysis time. Our customers do not need to waste valuable time changing filters and ...
-
Manufactured by AMETEK MOCONbased in USA
The PetroAlert 9100 incorporates the sensitivity, stability, linearity and selectivity of a flame ionization detector (FID), making it the ideal choice for the analysis of aliphatic hydrocarbons. The instrument is designed specifically for the oil and gas industry’s surface logging process. Fast C1 to C5 analysis is completed in 30 seconds, preserving the C1-C2 separation at >200:1 ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The smallest hydrogen generator for GC-FID, Precision hydrogen SL has been developed to offer a streamlined laboratory-grade hydrogen gas solution for GC flame detectors at a purity of 99.9995%. Precision hydrogen SL is safe, simple to use, easy to maintain and takes up minimal bench space. With an impressive, streamlined form factor, Precision Hydrogen SL produces hydrogen at up to 100cc/min ...
-
Manufactured by NIRA New Instruments and Research for Analysisbased in ITALY
Our FID LEL proposes some innovative technical characteristics, which allow continuous measures of total hydrocarbon ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Employs FID method featuring superb response characteristics and stability. Allows highly sensitive and highly precise continuous measurement. Measurement can be performed in 7 ranges and in a range ratio of 0 to 10/30,000 ppm C, making it possible to safisfy a wide variety of ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Available in two models, the ta3000 gas analyzer is an isothermal gas chromatograph that can be configured with a reduction gas detector or flame ionization detector. The analyzer offers extreme measurement sensitivity from parts-per-million (ppm) down to low parts-per-billion (ppb) levels, and negligible matrix effects from permanent gases. Combined with the separating power of gas ...
-
Manufactured by PAC L.P. A Roper Companybased in USA
The AC Analytical Controls AC8612 application delivers ASTM D86 correlated data for naphtha and gasoline samples within ASTM D86 groups 0, 1, and 2 in 15 minutes. It is based on fast detailed hydrocarbon analysis (DHA), and uses the PAC proprietary Fugacity Film Calculation Model for reporting accurate D86 correlated ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
The UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is your best transmitter ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
ATI's D12 Toxic and Combustible Gas Transmitter will accept up to 46 different sensors, greatly reducing the need for multiple gas transmitter models. The self-aligning sensor holder simply plugs in, with automatic gas sensor recognition and verification when contact is made. ...
-
Manufactured by Buck Scientific Incbased in USA
The PFP7 is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations. The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you