Flow Cabinets Equipment For Health And Safety Available In American Samoa
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Siloxane monitor is designed to output a total siloxane concentration in mg/m3 in gases derived from waste water treatment, food waste digestion and landfills. Understanding the levels of Siloxane in the gas allows operators to manage gas clean up systems such as activated carbon filters and regenerative filter systems. The monitor provides assurance to those exporting gas to grid that ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The CF-24B, FIXED SPEED, 12/24 VDC external battery operated field unit is ideal for remote site grab sampling. An elapsed, resettable timer (with independent 5 year battery) is incorporated into the unit housing to track exact sampling duration. The throughput flow rate is dependent upon the pressure drop across the filter media and the supplied voltage (12 or 24 volts DC). The CF-24B includes a ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
With a continually increasing demand, HI-Q Environmental Products Company has developed a new line of low flow, low cost, manual flow control air sampling systems. HI-Q has configured this line of complete sampling systems with flow ranges from 5-CCM to 50-LPM. Each unit includes a shock mounted vacuum pump, lightweight carrying case with non-skid feet, carrying handle, 6 foot grounded power ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment sampling applications such as RABS, Laminar Flow ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
Manufactured by Cruma – Diantech Solutions S.Lbased in SPAIN
Moreover, new Cruma FL-2 combines an exclusive and amazing exterior design with the best technology and interior development. All this in order to satisfy the operator in his everyday task and to protect him while preserving the environment. It is made one body and plug & play operation, so start working with it, it’s a matter of minutes. In FL models the air flow goes through a HEPA ...
-
Manufactured by Master Climate Solutions - Dantherm Group A/Sbased in ITALY
Axial fan. Achieved pressure 100 Pa. Possible connection to an optional room thermostat. Possible connection to 4, 2 or 1 flexible tubes. Flue gas exhaust. Separate oil burner. Summer-Winter switch for ventilation only. Fuel pre-heat filter included. Electronic flame control with photocell. Fan-Limit thermostat with automatic reset. Limit thermostat with manual reset. Two oil filters: oil pump ...
-
Manufactured by Zoonlab GmbHbased in GERMANY
The UNIPROTECT NG cabinet was specially developed for SPF rodent husbandry. The cabinet features humidity control, heating and a reliable day-/night cycle to ensure replicable climate and lighting conditions – e.g. for circadian studies. A sensitive pressure regulator maintaining the pressure barrier to the animal storage space ensures safe operation in positive or negative pressure. H14 ...
-
Manufactured by NuAire, Inc.based in USA
The LabGard ES 813 Class I Biological Safety Cabinet can be used as a balance enclosure or ductless fume hood for personnel protection for the safe handling of low risk powders, liquids, and animal ...
-
Manufactured by Mystaire Inc.based in USA
Mystaire® MY-PCR prep stations are compact laminar flow enclosures that reduce the risk of sample contamination while performing polymerase chain reaction experiments. Airborne contaminants are prevented from entering into the work zone through constant positive pressure HEPA filtered air. Each PCR prep station is equipped with a built-in 254 nanometer shortwave lamp to effectively ...
-
Manufactured by Vulcanic SASbased in FRANCE
Vulcanic air duct heaters are designed to heat new or recycled air circulating in industrial processes or in air conditioned buildings, up to 500 kW, 750 V 3-phase, > 300 ...
-
Manufactured by Air Science USAbased in USA
The Purair FLOW Series vertical laminar flow cabinets are compact, ideal for use in laboratory environments where space is limited, designed to protect equipment and other contents of the work zone from particulates with HEPA ...
-
Manufactured by Clyde-Apac Air Filtrationbased in AUSTRALIA
IVF/ART procedures for human and animal reproduction require a controlled work environment. Ultra-clean conditions are required to minimise microbial contamination. IVF Series cabinets are laminar flow workstations that are available with work zone width of 90cm, 120cm or 180cm. Internal work height of 80 cm allows effective and comfortable use of a wide range of stereo microscopes.The standard ...
-
Manufactured by ATB Water GmbHbased in GERMANY
In addition to our standard range of wastewater treatment plants with a connected load of up to 1,000 PE, we offer tailor-made solutions for small and medium-sized municipal applications. We see ourselves in this area as a product-independent planning and construction company for wastewater treatment plants with a capacity of up to 10,000 PE or 15,000 ...
-
Manufactured by Qingdao Qingyuanfengda Import and Export Co., Ltdbased in CHINA
The main performance indexes of the ZR-1000A mask virus filtration efficiency (VFE) detector conform to the YY/T1497-2016 detection method of Phi-X174 phage for the evaluation of virus filtration efficiency of medical protective mask materials . The method of double gas path simultaneous comparison sampling improves the accuracy of sampling, which is suitable for the measurement and verification ...
-
Manufactured by Germfree Laboratories, Inc.based in USA
The Class II, Type A Laminar Flow Biological Safety Cabinet provides protection for the user, product and the environment from particulate and aerosol hazards. The work area of the biological safety cabinet is continuously bathed with positive pressure ISO 5/Class 100 HEPA-filtered air to protect the product from contamination while an inward airflow protects the user. Approximately 70% of the ...
-
Manufactured by Mikropor, Inc.based in TURKEY
With more than 30 years of global filtration experience as a World Class Manufacturer utilizing state of the art technologies and equipment, we understand our customers’ demands and provide the ultimate solutions for Laminar Air Flow systems with the widest possible range. Aside from the actual air quality generated for cleanroom applications, it is vital to avoid unintended contamination ...
-
Manufactured by Hebei Aegis Metal Materials Co.,Ltdbased in CHINA
C11000 copper wire mesh is an infrequently used copper alloy in the world of wire cloth. C11000 copper itself is a pure, electrolytic tough copper with a minimum copper content of 99.9%. As with other pure coppers alloys, CDA 110 copper possesses excellent electrical and thermal conductivity, and is very malleable, pliable, and ...
-
Manufactured by Foshan Luomei Electric Technik Co., Ltd.based in CHINA
The temperature can be set to a fixed value by the control panel, airflow can be adjustable by valve Material: stainless steel, Airflow: 18m3/min or 36m3/min Pressure: 754Pa or 937Pa Heater power: 5KW/7.5KW/10KW/15KW/20KW/25KW/30KW Fan power: 0.37KW or 0.75KW Working time: 24 hours keep working everyday Contact: luomeiele(at)163.com, whatsapp ...
-
Manufactured by AKCPbased in THAILAND
Data center monitoring with thermal map sensors help identify and eliminate hotspots in your cabinets by identifying areas where temperature differential between front and rear are too high. Thermal maps consist of a string of 6 temperature sensors and optional 2 humidity sensors. Pre-wired to be easily installed in your cabinet, they are placed at the top, middle and bottom – front and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you