Only show results in Virginia? Ok

Fume Control equipment for Health and Safety

  • Premium

    Lyovapor - Model L-200 - Freeze Dryer with Infinite-Control

    The compact Lyovapor L-200 offers high-quality Freeze Drying (-55 °C, 6 kg) with a high level of automation. Infinite-Control includes easy method creation, method running, data logging, chart recording in real-time and interruption if needed from anywhere at anytime.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND. from Freeze Dryer with Infinite-Control Product line

  • Premium

    Yamato - Model LDS120/150/180 - Fume Hood

    Fume hood with fixed exhaust air volume.

    By Yamato Scientific America Inc. based in Santa Clara, CALIFORNIA (USA). from Fume Hood Product line

  • Premium

    GCER - Fireplaces

    Processing and sizing: GCER does not develop all parts concerning scrubber sizing and does not issue guarantees in this respect.

    By GCER based in Ksibet, TUNISIA. from Fireplaces Product line

  • Premium

    Tel Tru - Model 15-049 - Smoke Sticks, 12/pkg

    Tel-Tru Smoke Sticks from E Vernon Hill are one of the most convenient and widely used small volume tracer smoke sources.  Smoke Sticks use titanium tetrachloride which combines with atmospheric moisture to form a dense, persistent white smoke. To use, simply hold the Smoke Stick vertically and crush the end of the cotton swab with pliers. ...

    By MeterMall USA based in Marysville, OHIO (USA). from Smoke Sticks, 12/pkg Product line

  • Premium

    Yamato - Model MS90C/MV90C - Fume Hood

    Safe, easy operation, space saving fume hoods with selectable interior material and standard equipped with water valve, lighting lamp, power sockets and waste liquid recycling tank.

    By Yamato Scientific America Inc. based in Santa Clara, CALIFORNIA (USA). from Fume Hood Product line

  • Automatic Sash Controller - SC500 *new*

    With the automatic sash controller SC500, SCHNEIDER offers a product for a additional safety and energy savings in the laboratory environment. A passive infrared movement detector (PIR) constantly monitors the work area in front of the fume hood. If no operating personnel are directly in front of the fume hood, the fully automatic sash closing ...

    By Hans Schneider Elektronik GmbH based in Steinbach, GERMANY.

  • DuctWork

    WSC represents America's premier clamp-together duct system, which has become the new standard for industrial round duct applications. No welds, no rivets, no screws, and no precise measurements required.

    By Waller Sales Corporation based in White House, TENNESSEE (USA).

  • HEDRON III HORIZONTAL FLOW FUME

    This extended bed unit can be utilized to ensure maximum scrubbing efficiency on low soluble fumes. Hard to remove fumes such as nitric, hydrofluoric, and hydrochloric acids are more efficiently scrubbed with this unit.

    By KCH Services, Inc. based in Forest City, NORTH CAROLINA (USA).

  • CPI - Digestion Blocks

    CPI International manufactured ModBlocks are engineered to withstand the harsh environment of the metals digestion lab. The entire system is constructed of graphite and advanced composites that eliminate corrosion and metals contamination. The unique design of the ModBlock incorporates an external dual controller, which can be placed outside the ...

    By CPI International based in Santa Rosa, CALIFORNIA (USA). from Digestion Blocks Product line

  • Model KUA - Extraction Arm

    KUA is the extraction arm of choice and comes in various models. It is a flexible extraction arm for fume, gases and oil mist contaminants. Unique to the KUA is the combination of inner and outer arms of smooth aluminium tubing connected by our unique middle joint. The external easy-to adjust elbow joint and the spring-assisted joint supported in ...

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Extraction Arm Product line

  • FlexHood - Extraction Hoods

    The FlexHood extraction hood is developed to cover a specific welding area, such as a robotic installation. When source extraction is impossible – for example due to the fact that welding robots move on a rail system - extraction hoods are an effective way to extract welding fumes near the actual process. It reduces the amount of fumes, ...

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Extraction Hoods Product line

  • Model SER - Spring-Operated Hose Reel

    An easy way to store the exhaust extraction hose. The spring operated hose reel has proven its reliability as it has been used for many years in various vehicle workshops all over the world. The SER hose reel operates smoothly, which makes it easy to use. Simply pull down the hose and it locks in the desired position. Pull again and the hose ...

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Spring-Operated Hose Reel Product line

  • Model MHR - Motorized Hose Reel

    The motorized hose reel for normal and light-duty vehicle workshops. If your workshop has a high ceiling to accommodate larger vehicles, you will need hose reels that can wind the hose all the way back on the reel. With no hoses hanging down you can also operate other appliances in the workshop such as cranes or lifts. With the hose out of the way ...

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Motorized Hose Reel Product line

  • Nederman - Bench Top Fume and Odor Extraction Kits

    Complete kits for extraction of soldering fumes and capturing of odors when gluing, or working with solvents, The Bench Top extraction kits includes arm(s) with hood or nozzle, fan with speed control and standard filter (particle, HEPA or gas), hose, connection details, and table bracket. The speed of the fan is variably controlled by a speed ...

    By Nederman based in Helsingborg, SWEDEN. from Bench Top Fume and Odor Extraction Kits Product line

  • Nederman - Standard Welding Fume Extraction Arm

    Welding fume extraction arm standard For working environments with fumes, vapours or non explosive dust. Nederman Extraction Arm Standard is specially designed for working environments with fumes, vapours or non explosive dust, where the demands for higher airflows and temperatures are moderate. Typical workplaces can be welding schools, different ...

    By Nederman based in Helsingborg, SWEDEN. from Standard Welding Fume Extraction Arm Product line

  • Nederman - Model NEX MD - Welding Fume and Dust Extraction Arm

    NEX MD welding fume and dust extraction arm. With high air flow and low pressure drop NEX MD extraction arm is perfect in medium to heavy duty applications NEX MD welding fume extraction arms are the top of the range arms when it comes to high airflows and extraction of media with higher temperatures than normal. The weld fume extractors are ...

    By Nederman based in Helsingborg, SWEDEN. from Welding Fume and Dust Extraction Arm Product line

  • Nederman Extraction Arm NEX HD

    Nederman NEX HD extraction arms are the top of the range arms when it comes to high airflows and extraction of media with higher temperatures than normal. The arms are specially designed for working environments with very heavy smoke, vapours or non explosive dust. Typical workplaces are the metal fabrication industry or other type of industries ...

    By Nederman based in Helsingborg, SWEDEN. from Nederman Extraction Arm NEX HD Product line

  • Nederman - Extension Fume Extraction Arm

    The Nederman 4.2m extension arm is designed to be used when extra reach is needed. Manufactured from robust steel profiles. The product can be connected direct to a single fan or to a ducted system. The product is suspended by a pivoting wall bracket close to the wall and a joint on the middle of the product, which makes it flexible in all ...

    By Nederman based in Helsingborg, SWEDEN. from Extension Fume Extraction Arm Product line

  • Nederman - Bodywork Arm

    The Nederman Bodywork extraction arm is based on teh Original arm. It is specially designed for the extraction of fume, dust and vapours created duting vehicle bodywork, when welding, grinding or painting. The arm is available in a length of 5m, which can be connected direct to a singel fan or to a duct in a system. Two 4-way friction joints makes ...

    By Nederman based in Helsingborg, SWEDEN. from Bodywork Arm Product line

  • Nederman Portable Fan

    Ideal as an extractor for welding fumes, steam, dust or for providing fresh air during work in confined and enclosed spaces. A compact and easy to use fan which, in combination with inlet and outlet houses, make a flexible and versatile unit with a wide range of applications. Compact and easy to use. Stand included, castor wheels as accessory. ...

    By Nederman based in Helsingborg, SWEDEN. from Nederman Portable Fan Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you