Hazard Detection Equipment For Health And Safety Available In Bhutan
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An extremely compact, fast-response infrared scanning system designed to detect emerging hot spots on conveyor belt materials. Designed for industrial environments, the fixed-focus HotSpotIR high-speed scanning system detects small hot inclusions on a moving conveyor before they can cause a fire. Reliable alarm processing is achieved without software or computer ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
The ElvaX RoHS analyzer is specifically designed to test consumer products for compliance with the RoHS directive. One of the key features of ElvaX RoHS is automatic chlorine correction of calibration, which takes into account the influence of chlorine content in plastics on measurement of heavy metals . This allows for the use of a single calibration to test objects made of various plastics ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The 7200 Plus and 7400 Plus Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and user friendly. ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The Elrec Pro is a 10 channel Induced Polarisation (IP) and Resistivity receiver designed to improve productivity when recording deep profiles and soundings. Beside the classical arithmetic and logarithmic modes, ELREC Pro also offers a Cole-Cole mode and twenty fully programmable windows for a higher flexibility in the definition of the IP decay curve. A setup wizard guides the operator through ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The Elrec Lite G is a 2-channel hand held induced polarisation (IP) and Resistivity receiver mostly designed for mineral exploration. This low-weight device is particularly suited for sounding and profiling measurements where the operator must move from several hundreds of meters, carrying the ...
-
by Solvias AGbased in SWITZERLAND
The SAM GC-600 Chemical Hazards Monitor is a high-performance analyzer that is based on gas chromatograph technology. It was developed specifically for continuous chemical hazards monitoring, and is used where highly toxic or carcinogenic substances may be present in the production-plant air or in the workplace. Based on its high level of selectivity and sensitivity, as well as its low detection ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The VIP series of Electrical transmitters are purposely designed for deep Induced Polarisation or Resistivity sounding investigations. The VIP 5000 internal microprocessor is capable of excellent current regulation in almost any load. Predominantly used as part of mineral exploration studies, the VIP series include three systems with different power specifications. This transmitter is generally ...
-
based in USA
Detector Electronics is in business to keep our customers safe and satisfied. By adding surveillance and digital analysis opportunities to an already cutting edge, world class fire and gas system, we enable our customers to be just that – safe and ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The TIP One is purposely designed for shallow induced polarisation or Resistivity sounding investigations. The TIP One injects a regulated current or regulated voltage into the ground via a simple 12V battery. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers. To simplify operation, the instrument manages the injection current and voltage automatically. When ...
-
Manufactured by ENMET, LLCbased in USA
CP-60 is a 1, 2, or 3 channel wall mount controller designed for monitoring up to three 4-20 mA inputs from remote gas sensor/transmitters or similar devices. The instrument provides 24 VDC power, audible/visual alarms, alarm ...
-
Manufactured by IRIS Instrumentsbased in FRANCE
The Promis device is a multi-frequency, multi-spacing 3 component slingram type EM System for sounding and profiling the soil. This system features a transmitter loop to produce a primary magnetic field that will induce eddy current in conductive materials. These eddy currents will generate a secondary magnetic field that will be measured with the receiver loop. This system measures the in-phase ...
-
based in USA
Take surveillance to the next level; record activities monitored by the xWatch® camera. Det-Tronics offers real-time event recording through the TruVision DVR line by GE Security. Because the DVR allows a situation to be viewed before, during, and after an incident, teams can focus on how to improve future ...
-
Manufactured by WindCube - a Vaisala companybased in FRANCE
The Windcube 400S-AT Lidar provides an operational answer for wind shear hazards: it scans in real time all potential hazard zones within the airport air space, detects wind shears to 10km range, and sends automatic alerts to air traffic ...
-
Manufactured by 4B Groupbased in USA
The A400 Elite Trackswitch belt misalignment monitor uses 4B WDA or BAP magnetic proximity sensors to monitor the alignment of the belt in bucket elevators. Each control unit incorporates two independent monitoring circuits for early detection of belt misalignment on one or two bucket elevators. The 4B magnetic reluctance sensors operate in pairs to detect the position of steel bolt heads or ...
-
Manufactured by Accutron Instruments Inc.based in CANADA
Sentro 1 is the world’s foremost fixed gas detector for hazardous location gas detection. At the heart of Sentro 1 is the eModule; intelligent standardised gas sensing modules to cover a range of toxic and flammable gases. Dynamic and historic data is stored within each module together with the condition of the gas sensing element and its service ...
-
Manufactured by Laser Detect Systems LLCbased in USA
The BSCAN is a cost-effective, interactive, and highly sensitive bottled liquid scanner (BLS). It is capable of detecting hazardous substances such as narcotics in both liquid or powder form, while contained in glass, transparent, or translucent plastic bottles. As liquid explosives become a growing threat to aviation security, such explosives detectors capable of analyzing liquids disguised as ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long. Using superior 'Xenon Flash' technology the SafEye range is immune to false alarms caused by partial blockage and extreme weather conditions (fog, rain or snow) and direct or reflected sunlight, flame or other black ...
-
Manufactured by WTS Geophysical Solutionsbased in INDIA
WZG-24C/48C engineering seismograph is equipment from the third generation that supports the window eight systems and is multi-functioning, high-precision, and stable. Seismic source for examining is from the hammer, electric flicker, or explosion for thousand-meter depth. It applies for seismic surveys, as sheared wave velocity test, surface wave exploration, pier foundation test, ground ...
-
Manufactured by Tecnologías Econtrol SLbased in SPAIN
The ECONTROL Emergency Shut Down Valves (ESDV, ESD, ESV, SDV) are used to isolate pressure and flow from a particular source during an overpressure situation or detection of a dangerous event. ESD valves are integrated into the design of the plant system equipment and can be installed in-line to any location upstream, midstream or ...
-
Manufactured by ENMET, LLCbased in USA
CP-10 is an economical, yet versatile single-channel controller designed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. This controller provides 24 VDC power, audio/visual alarms, alarm relays and other features. CP-10 is easy to install, designed for wall mounting and completely programmable from the front panel membrane ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you