We couldn't find any hazard monitoring equipment suppliers or service providers located in Bolivia
Here is a list of equipment results with suppliers serving Bolivia
Hazard Monitoring Equipment For Health And Safety Available In Bolivia
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Based on NIR XDS technology, the NIRS XDS Process Analyzer belongs to the next generation of process analyzers for real-time analysis. Nondestructive, accurate measurements are performed wherever a product is moving, for instance, above a conveyor belt, web, or ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
NIRS XDS Process Analyzer systems can measure a variety of sample types, such as granules, powders, liquids, slurries, or opalescent substances, among others. These analyzers provide fast, nondestructive analysis of pharmaceutical, chemical, and petrochemical products. If required, up to 9 inline measuring channels can be multiplexed with this system. ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field. The Earth’s magnetic field (the so magnetosphere) varies from place to place, for various reasons such as inhomogeneity of rocks and the interaction between charged particles from the Sun and the magnetosphere. A mass of ferromagnetic material creates a detectable disturbance in ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Maximal efficiency with up to 10 measurement points in parallel. Continuously monitor key parameters such as moisture, protein, fat, ash, starch, fiber, oil at any process step with NIR-Online Multipoint Sensor. Innovative Multipoint heads provide maximal efficiency for up to ten measurement points in parallel ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
Manufactured by MSR Magmeterbased in CANADA
This is our latest magnetic flowmeter based on the sucessfull Magnum design. Magnum EX is used in hazardous environments and locations (CSA Class I, Div. 1, Ex ia). In all other respects it has the same features as the standard and IC version ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The Greyline LIT25 is a level indication sensor that displays, controls, and transmits level. The non-contacting level sensor mounts at the top of a tank and the compact, watertight display enclosure is mounted at a convenient location nearby. Operators can calibrate the LIT25 with its 2-button keypad, without climbing to the top of the tank, enabling organizations to gain better stock and ...
-
Manufactured by Status Scientific- a brand by Process Sensing Technologies (PST)based in UNITED KINGDOM
These flameproof gas sensor heads that can be fitted with a range of different sensor technologies (infrared, pellistor, electrochemical) for detection of a wide variety of gasses, depending on the sensor fitted. They are Ex d certified components and as such must be fitted into compatible separately certified apparatus such a Flameproof (Ex d) junction box, Increased Safety (Ex e) junction box ...
-
Manufactured by Alpha Moisture Systemsbased in UNITED KINGDOM
Model AMT-Ex Dewpoint Transmitter is a 3-wire 4-20 mA powered transmitter that continuously measures moisture in process gas or compressed air. The 4-20 mA linear output signal can be factory configured for any of the following moisture units:- °C or °F dewpoint, ppm(v), ppb(v), g/m3, and lb/MMSCF. Model AMT-Ex is certified Intrinsically safe to IECEx, and ATEX for use in hazardous areas ...
-
Manufactured by Armstrong Monitoring Corporation (AMC)based in CANADA
A compact system for up to four sensor/transmitters, the AMC-1400 monitoring panel provides features normally found in much larger, more expensive packages. An easy to read vacuum fluorescent display provides continuous gas concentration and alarm indication for each of four sensors. Housed in a fiberglass enforced polyester enclosure, the fully programmable AMC-1400 is designed to permit the ...
-
Manufactured by Haskelbased in USA
High pressure refrigerant pump designed for safe, reliable handling of Liquid, Gas or a mixture of both. Haskel refrigerant pumps are designed for recovery or recharge of fluids, whether they are liquid or gas. The pumps offer you plenty of leverage in terms of their operation. Not only can they condense a common refrigerant without the use of a condenser, but they also provide the flexibility to ...
-
Manufactured by Mine Safety Appliances Co (MSA)based in USA
Ultima X Series Gas Detector for indoor or outdoor continuous monitoring of hazardous gases. Designed to provide thorough, continuous monitoring of many hazardous gases, the indoor/outdoor Ultima X Series Gas Monitors offer excellent performance and MSA quality craftsmanship. DuraSource Technology offers extended sensor life, while HART provides convenient setup, calibration and diagnostics. HART ...
-
Manufactured by Pendar Technologiesbased in USA
This system is based on Pendar’s proprietary monolithic distributed feedback (DFB) quantum cascade laser (QCL) array. The DFB QCL array source is a highly stable, rapidly and continuously wavelength tunable broadband infrared source that can be used for illumination for various spectroscopic applications. Each element of the array is individually addressable and emits at a different ...
-
Manufactured by KSK Developmentsbased in POLAND
A garbage collection sensor is a device that is used to monitor and manage the level of waste in garbage containers, such as dumpsters or trash cans. The sensor works by measuring the level of waste in the container and transmitting that data to a central monitoring ...
-
Manufactured by Electro-Sensors, Inc.based in USA
The Electro-Sentry 1 is a hazard monitoring system commonly used on grain elevator legs or conveyors to monitor critical points for shaft slowdown, bearing temperature, and belt alignment as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage, and process downtime. All Electro-Sentry 1 sensors ...
-
Manufactured by Deeter Electronics Ltdbased in UNITED KINGDOM
Manufactured by Migatron Corp and distributed by Deeter Electronics, these Intrinsically Safe ultrasonic sensor have ANZEx, ATEX, cUL, & IECEx approvals for use in Hazardous (Classified) ...
-
Manufactured by IS Instruments Ltdbased in UNITED KINGDOM
Our Stand-Off Raman probe can make measurements from distances of up to 3 meters from the target. Our Stand-Off Raman Probes are fitted with the highest quality optical filters to suppress any unwanted laser and have focal lengths from 50 mm up to 3 m. These probes are designed to work seamlessly with the ISI range of HES spectrometers with etendue characteristics to match and designed to ...
-
Manufactured by Automation Products Group, Inc. (APG)based in USA
Hazardous Locations Meet High Programmability. Intelligent and highly configurable. The LPU-2428 can calculate distance, level, flow, and volume in linear and non-linear tanks. Range: Up to 25 ft. Mount: 2 in. NPT. Output: 4-20 mA. Certification: CSA, Class 1, Div 1, Class 1, Div 2, Intrinsically ...
-
Manufactured by Uniphos Envirotronic Pvt. Ltd. (UEPL)based in INDIA
KwikSense Smart Gas Transmitters are universal transmitters with plug & play sensor technology. They are capable of accepting more than 100 smart gas sensors. Its non-intrusive calibration helps customers to calibrate the transmitters in hazardous area without opening the transmitter thus reducing the down time for calibration. Alternatively the smart gas sensors can be plugged out and calibrated ...
-
Manufactured by Eberbachbased in USA
Eberbach’s large capacity Variable-Speed Orbital Shakers are designed for rotary swirling action and is used for bioprocessing of plant cell cultures, large batch mammalian cell culturing, aeration of fermentations and various other chemical mixing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you