Hazard Potential Equipment For Health And Safety Near Virginia
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
At the heart of our patented Encase polypro system is its electrofusion fitting with a groundbreaking heavy-gauge resistance wire molded into the socket. The result is a premier system that offers considerable reduction of installation time and the highest quality bubble-tight joints ...
-
Manufactured by Bacharach, Inc.based in USA
The MGD-100 is an affordable and scalable gas detection system used to provide real-time monitoring of refrigerant and combustible gases, ammonia and carbon dioxide. The unit alarms when pre-set thresholds are exceeded. Alarms are monitored by a centralized controller, which can alert personnel of potential hazardous conditions via an onboard buzzer and LED alarm indicators. The unit can be ...
-
based in USA
Educates employees about the ANSI MSDS format and reviews how the information in an MSDS can help them work safely with potentially hazardous chemicals. Covers the four basic questions the MSDS should ...
-
based in USA
Today's workplaces are filled with written warnings alerting workers of potential hazards. Make sure employees understand the warnings concerning what to do and what NOT to ...
-
based in USA
All potentially hazardous materials entering a laboratory have a Material Safety Data Sheet (MSDS). But to make good use of the information on an MSDS, employees need to understand how it is organized and what it contains. This training program reviews the various sections of the MSDS, what information can be found in each section and most importantly, how this information can help employees to ...
-
based in USA
Imagine no more fires with the QUENCHER Spark Arrestor. NEWS; After an unparalleled success since January 2005, we are excited to announce the first comprehensive improvement to the Quencher inline spark arrestors. The new 2019 upgrade provides lower more stable pressure drop throughout the operating range, without going below the critical 3/4 inchWC needed for effectiveness. This rule applies ...
-
based in USA
The Model PGA is an intrinsically safe portable multi-gas detector for continuous industrial gas monitoring applications in hazardous and potentially explosive atmospheres. Designed for personnel protection when entering or working in an environment where a gas hazard may exist, the portable gas detector produces audible and visual alarms if any of the monitored gas levels fall outside the ...
-
Manufactured by Axiall Corporationbased in USA
Accu-Tab three-inch calcium hypochlorite Cal hypo tablets are able to erode reliably, consistently and predictably because they undergo a multi-step manufacturing and quality control process so they will not soften and clog the system—a common problem with knock-off three-inch tablets and ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Interlocking systems for safe operation. Used to prevent potentially hazardous situations caused by errors in the operating sequence of industrial processes. The operator is forced to follow a predetermined sequence by means of a mechanical coded key ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
SensAlert ASI - Advanced Safety Integrity – The best solution for gas detection in critical safety applications. SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility while remaining the easiest to install, ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Measures percent rock dust in coal mine dust samples, Portable direct-reading instrument, Instantaneous explosibility indication, Easy-to-read digital display, MSHA approved (18-A ...
-
Manufactured by AccuformNMCbased in USA
All purpose marking tapes are great for identifying potential hazardous areas, marking walkways or in 5S/Lean ...
-
Manufactured by 3Mbased in USA
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 can satisfy the most demanding safety requirements. Designed to detect toxic gases, oxygen and refrigerant gases, the CTX 300 uses a new sensor for CO2 detection over three different ranges 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 transmits data in record time. With a wide ...
-
Manufactured by Abatement Technologies, Inc.based in USA
Features variable airflow control from 300 cfm to 900 cfm. High-efficiency airfoil blower provides 6 ACH @ 7,500-9,000 ft³. Front swivel casters allow the PAS1200 to “turn on a dime” in tight spaces. Strong leak-resistant cabinets and user-friendly ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Universal Point Gas Detector Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas ...
-
Manufactured by CSE Corpbased in USA
The CSE G4 is a state-of-the-art portable multigas detector capable of measuring up to 4 gases simultaneously and continuously. In addition to the standard combustible (CH4) and oxygen (O2) sensors, you can choose up to two toxic gas sensors from the following list to meet your operation's needs: Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Nitric Oxide (NO), Nitrogen Dioxide ...
-
based in USA
The USS Atlanta, a United States naval submarine, and its crew provide a dramatic backdrop to compare the dangers of working in a submarine with those of working in a confined space in this high-impact program.Working in a confined space is a lot like working in a submarine -- space is tight, atmospheric conditions are critical and potential hazards abound. This program features the training ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The LRP (liquid rejection probe) contains a spring-loaded membrane filter together with a very sensitive check valve. It is intended for use on a natural gas pipeline to prevent common problems from damaging the analyzer attached to it. It is intended to be mounted on top of a ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The Demister II provides a significant improvement over the original AMI demister. As well as acting to remove mists from a sample, it now also effectively condenses vapors so as to make sure that condensation does not occur further down the sample system, particularly within the Liquid Rejection Probe (which can cause premature failure of the probe membrane as it loads up with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you