Hazardous Areas Downloads

  • Premium

    Model M100 - Compact Transmitter Brochure

    The well-proven head mount transmitter concept for analytical parameters. The M100 is the first transmitter for analytical measurements based on a compact, head mount design. With its approvals for hazardous area use the M100 head mount transmitter provides operating assurance even in challenging ...


    By Mettler - Toledo Int. Inc

  • Premium

    MultiMount - Model SWB505 - Weigh Modules – Multi Purpose

    Installation Tips and Precautions: Never extend or cut the load cell’s cable length. Avoid moisture and dust. Ensure voltage stability (use regulated power supply). Avoid overload and shock. Ensure good grounding. For hazardous area installations in Europe, refer to the enclosed instructions ...


    By Mettler - Toledo Int. Inc

  • Premium

    InFit761e Static Housings Technical Specifications

    InFit®761e/764e – The insertion housingsfor vessels, bioreactors and pipingsTechnical dataOperation and system 2General operation of the housing 2Complete measuring system 2Dimensional drawings 3Dimensional drawings InFit 761e 3Dimensional drawings InFit 764e 6Possible installations 8Process connections 10Technical specifications 13Technical specifications InFit 761e 13Technical specifications ...


    By Mettler - Toledo Int. Inc

  • Premium

    M400 2-Wire Transmitter - Technical Specifications

    M400 2-wire Transmitter Series for pH/ORP, Oxygen, Conductivity and Dissolved Carbon DioxideVersatile, intelligent transmitters for harsh conditionsTechnical DataDimensions and installation drawings 2Specifications 3Connector terminal definitions 8Ordering information 13Short descriptionThe M400 2-wire transmitter series is the state-of-the-art transmitter for most demanding conditions in ...


    By Mettler - Toledo Int. Inc

  • Premium

    Comparator Balances Catalogue

    Innovative Solutions For Lifetime AccuracyComparator BalancesVacuum TechnologyRobotic SolutionsAutomated & Manual OperationSolutions up to 5400 kgComparator Balances2METTLER TOLEDO Comparators determine even the smallest differences in mass. They provide highest resolution and excellent repeatability – the critical factors for your comparative weighing performance. We offer several models ...


    By Mettler - Toledo Int. Inc

  • Premium

    WWEM 2014 Exhibitors List

    CateringAreaCateringArea12345678910111255 56 57 58 59 60737274717570766977687867796680655453525150494847464544439089 91 9288 87 86 85 84 83 82 81107108106109105110104111103112102 93101 94100 9599 9698 971314151617181920212223140 141139 142138 143137 144132 133131 13413513013612931 30 29 28 27 26 25 243233343536373839404142128 127113 114126115125116124117123118122119121120Conference ...

  • Premium

    WWEM 2014 Floorplan

    CateringAreaCateringArea12345678910111255 56 57 58 59 60737274717570766977687867796680655453525150494847464544439089 91 9288 87 86 85 84 83 82 81107108106109105110104111103112102 93101 94100 9599 9698 971314151617181920212223140 141139 142138 143137 144132 133131 13413513013612931 30 29 28 27 26 25 243233343536373839404142128 127113 114126115125116124117123118122119121120Conference ...

  • Premium

    MEDOR Exp CSA On-Line Analysis & Monitoring of Sulfur Compounds - Brochure

    On-line analysis & monitoring of sulfur compounds in natural gas and gaseous fuels for hazardous ...


    By Chromatotec Group

  • Premium

    MEDOR Exp ATEX On-Line Analysis & Monitoring of Sulfur Compounds - Brochure

    On-line analysis & monitoring of sulfur compounds in natural gas and gaseous fuels for hazardous ...


    By Chromatotec Group

  • Premium

    LaserGas - Model III SP CO - Compact Combustion Analyzer System Datasheet

    NEO Monitors LaserGas III SP CO (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ CO measurements for virtually any type of combustion control. The configuration is transmitter/receiver units for cross-stack installation. An external junction box simplifies installation and maintenance. The operation principal is based on the well proven ...


    By NEO Monitors AS

  • Premium

    NEO Monitors LaserGas - Model III OP NH3 - Gas Detector Sensor Brochure

    NEO Monitors new LaserGas III Open Path NH3 Gas Detector is specifically designed for service in hazardous areas. Based on our third generation LaserGas Technology, the entire instrument is built into compact flameproof enclosures making it fit for zone 1 applications. The LaserGas III NH3 OP consists of a transmitter and receiver unit that is mounted diametrically opposite each other at ...


    By NEO Monitors AS

  • Premium

    LaserGas III SP NH3 DeNOx Ammonia Analyzer (3rd Generation) Brochure

    NEO Monitors LaserGas III ammonia analyzer (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ NH3 measurements for virtually any type of DeNOx systems. The configuration is transmitter/receiver units for cross-duct/stack installation. An external junction (cable connection) box simplifies installation and maintenance. The operation principal ...


    By NEO Monitors AS

  • Premium

    Hydro/ 2 and Hydro/ 3 - Motor Metering Pumps Operating Instructions Manual

    Metering pumpsHydro/ 2 and Hydro/ 3Operating instructionsP_HY_0004_SWENOriginal Operating Instructions (2006/42/EC)984721 BA HY 017 10/15 ENPlease carefully read these operating instructions before use. · Do not discard.The operator shall be liable for any damage caused by installation or operating errors.The latest version of the operating instructions are available on our homepage.Read the ...

  • Premium

    Metrohm ADI 2045TI Ex Proof Process Analyzer Brochure

    In hazardous environments, where concentrations of flammable gases, vapors or dust occur, it is vital that instruments be safe to operate and do not initiate an ex­plosion. For these environments Metrohm Applikon has developed the third generation of wet chemical Process Analyzers. The ADI 2045TI Ex proof fulfills EU Directives 94/9/EC (ATEX95) and is certified for Zone­ 1 and Zone­2 ...


    By Metrohm AG

  • Premium

    LaserGas III Open Path HF Gas Detector Brochure

    NEO Monitors LaserGas III new HF Open Path Gas Detector is specifically designed for service in hazardous areas. Based on our third generation LaserGas Technology, the entire instrument is built into compact flameproof enclosures making it fit for zone 1 applications. The LaserGas III HF OP consists of a transmitter and receiver unit that is mounted diametrically opposite each other at distances ...


    By NEO Monitors AS

  • Premium

    Model-125 Explosion-Proof Smoke Monitor Datasheet

    In the event of a fire in a building or other structure, such as an oil rig, Health and Safety regulations require that immediate action be taken to prevent the ingress of smoke and fume into air-conditioning and ventilation ducts. The Model 125 explosion-proof smoke monitor is specifically designed to be mounted in ventilation ducts and to comply with strict regulations that require rapid ...


    By Codel International Ltd

  • Premium

    TDHI TD-4100XD Continuous On-Line Oil in Water Monitor - Technical Data

    The TD-4100 XD is a ruggedized, continuous on-line fluorescence based oil in water monitor. The XD is designed specifically for offshore/onshore oil production, refining, petro-chemical, mining, and other industries that require robust on-line hardware for severe duty and hazardous area locations. The monitor is skid mounted and constructed of 316 stainless steel, including an external keypad, ...

  • Premium

    Helix Dryer Vacuum Contact Drying Brochure

    Krauss-Maffei HD/BD helix dryerswww.andritz.comBD-EN-05_11.qxp_Layout 1 23.02.12 10:32 Page 1 Krauss-Maffei HD/BD helix dryersTable of contentsKrauss-Maffei helix dryer, HD 3Process advantages  4Krauss-Maffei helix dryer, BD 5Process advantages  6Helix dryer, HD/BD mobile 7Process advantages  8Systems 9Process automation 10Technical data 11Test centers 12Services  13Company profile 14Product ...

  • Premium

    Oil Water Interface Meter (Handheld and Standard) Operating Manual

    1. Instructions specific to hazardous area installations (Reference European ATEX Directive 94/9/EC, Annex II, 1.0.6.) The following instructions apply to equipment covered by certificate numbers Sira 04ATEX2366: The equipment may be located where flammable gases and vapours of group IIB may be present. The equipment is only certified for use in ambient temperatures in the range -20ºC to ...


    By Geotech

  • Premium

    Spare Parts and Consumables Brochure

    Fieldbus installations made easyServicing the whole range of PROFIBUS andFOUNDATION™ fieldbus applicationsUtilizing the latest generation of field devices and latest fieldbus technologies effectively is impossible without some comprehensive know-how.ABB is your partner for longstanding expertise in network fieldbus technology and distributed intelligence among field devices.In addition to the ...


    By ABB Measurement Products

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you