Only show results in Texas? Ok

Hazardous Areas services for Health and Safety

  • Premium

    AERZEN - nRelubrication Device

    AERZEN relubrication devices lubricate the bearings of electric motors automatically and dosed with the correct grease quantity according to manufacturer’s specifications. Time intervals are possible up to 36 months. This allows a permanent and economical operation of all packaged units made by Aerzen.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from nRelubrication Device Service line

  • Spot Repair

    Many cases of damage in the sewer are isolated defects. We rectify these quickly and reliably by lining the structure using the spot repair method in the nominal diameter range DN 100 to DN 1000.A made-to-measure, glass fibre fabric impregnated with three-component silicate-based resin is installed pneumatically in the damaged area using camera ...

    By Rainer Kiel Kanalsanierung GmbH based in Blomberg, GERMANY.

  • Health Service & IT Division

    Benchmark Services provide a hygiene cleaning service that is bespoke to the unique needs of the private sector health and the NHS in the south east of England. We carry out back up services to the core cleaning service providing extra effort, knowledge or expertise as and when required. This can be as varied as wall washing and sterilising in ...

    By Benchmark Environmental based in Surrey, UNITED KINGDOM.

  • Construction Monitoring & PCAs

    The Construction Monitoring & PCA's discussion area is where commonground members discuss issues, share opinions, and ask questions surrounding property assessments, building performance, and building construction.

    By Commonground based in Milford, CONNECTICUT (USA).

  • Documentation Services

    We provide following services in documentation area: Operating and maintenence manuals, Assitance in PED, ATEX and CE Certification, Checking and approval of third party documents.

    By Swedish Exergy AB based in Gothenburg, SWEDEN.

  • Data Management - Digital Plant

    The database will feed into the following key documents ensuring data consistency across disciplines:‚Äč-Process and Instrumentation Diagram (PID)-3D modelling and subsequent catalogue driven Pipe Isometrics-Instrument loop diagrams, wiring arrangements-Electrical single lines, load schedules, and detailed wiring schematics-Hazardous area (ATEX) ...

    By PROCESS GROUP LTD based in Durham, UNITED KINGDOM. from Data Management - Digital Plant Service line

  • Services

    ITS offers comprehensive technical support, service and maintenance contracts for your electrical tomography systems. We are committed to the provision of a total, quality assured service and we are certified to meet the requirements of ISO9001:2008. Many customers take advantage of one of our cost effective technical support packages, for ...

    By Industrial Tomography Systems (ITS) based in Manchester, UNITED KINGDOM.

  • ImageWave - SDS Database Services

    Our SDS Database Services can help you build your SDS database and keep it up to date. If you need someone to create your SDS database from a list or hardcopies or update your existing database look no further. We have a team of experienced data entry personnel to handle any sized job quickly and accurately.

    By ImageWave Corporation based in Lago Vista, TEXAS (USA).

  • Atex Camera Unit

    Lehane Environmental operate 2 ATEX Camera Survey Units. The units are particularly suited to surveying lines in the Pharmachem and Petrochem Industries where ATEX Certification is a particular requirement. However the use of Atex Cameras ensure a higher level of safety as flammable and explosive gases could be potentially found in any pipe. Our ...

    By Lehane Environmental & Industrial Services Ltd based in Little Island, IRELAND.

  • E&I & Process Control

    P & I Design has extensive expertise in all aspects of Instrumentation and Electrical Systems, from initial conceptual design to final commissioning. Process Control systems implemented have involved PLC, DCS and SCADA technologies applied to a wide range of processes and industries. A specialist area involves Safety Instrument System Design ...

    By P & I Design Ltd based in Stockton-on-Tees, UNITED KINGDOM.

  • North American Certification Services

    CSA Group is your expert source for testing & certification of equipment used in hazardous locations across North America. We will help you obtain the CSA North American certification mark which is widely recognized by regulatory authorities in the U.S. and Canada at the federal, state, provincial and local levels. You will be working ...

    By CSA Group based in Toronto, ONTARIO (CANADA). from North American Certification Services Service line

  • Process Safety Services

    Expertise Includes: HAZOP & HAZID Studies, Emergency Venting Systems designed for two Phase flow to the DIERS methodology, DSEAR, ATEX and Hazardous Area Classification to BS EN 60079-10 or IP Model Code Part 15, Emergency Shut Down Systems to BS EN 61508/11 including SIL Assessments, Safety Audits, Risk Assessments, Pressure Systems Safety ...

    By BPE Design And Support Limited based in Hampshire, UNITED KINGDOM. from Process Safety Services Service line

  • Hardware - Western Industrial Solutions

    There are a lot of “pretty” consumer grade tablets on the market. They look cute, do lots of flashy stuff, but wouldn’t last 15 minutes in a Northern Canadian oil field. If you need ultra-rugged and intrinsically safe hardware in the field, then you want the Xplore iX104C5. The most full featured rugged tablet in the industry. ...

    By Western Industrial Solutions based in Kamloops, BRITISH COLUMBIA (CANADA).

  • Trident Risk Control Services

    Trident offers our policyholders the services of experienced risk control specialists who identify potential hazards and loss areas using thorough claims loss exposure analysis. We work with our clients to formulate viable solutions that will help them control and reduce exposures to loss. Our staff has an average of more than 50 years' experience ...

    By Trident Insurance based in San Antonio, TEXAS (USA).

  • Hazardous Area Electrical Services

    Our services include: Electrical installation designed to meet IEE regulations and ATEX 137A directives control panel. Control Panel design and build with onsite installation and commissioning. Hazardous area inspection, testing and reporting.

    By Absolute Cooling Tower Services Ltd based in West Yorkshire, UNITED KINGDOM. from Hazardous Area Electrical Services Service line

  • Process Controls and Instrumentation Services

    BPE offers the full range of Control System and Instrument services from conceptual studies to final design and handover. This includes full Qualification for validated systems. The support extends from simple one-off consultations to the design, installation and commissioning of complete projects..

    By BPE Design And Support Limited based in Hampshire, UNITED KINGDOM. from Process Controls and Instrumentation Services Service line

  • IECEx Certification Services

    CSA Group’s highly trained technical experts will work with you to help obtain the approvals you need under the International Electrotechnical Commission Explosive Scheme (IECEx) for electrical equipment used in hazardous locations around the world. As a recognized IECEx Body and Testing Laboratory, we can help you streamline the process by ...

    By CSA Group based in Toronto, ONTARIO (CANADA). from IECEx Certification Services Service line

  • Mold Management

    Mold is most often associated with damp, musty locations and can cause minor allergic reactions in people. ES&H can test suspected areas, determine what kind of mold it is, and offer a solution for abatement, if needed. We can monitor and inspect the areas to ensure they stay mold free. And we can help you develop a mold management program to ...

  • ATEX Certification Services

    CSA Group’s highly skilled technical staff will provide you with expert testing & certification services for your equipment used in hazardous locations in Europe as required by the ATEX directive. We can test & certify your equipment for hazardous locations to European standards as a Notified Body under the ATEX directive.

    By CSA Group based in Toronto, ONTARIO (CANADA). from ATEX Certification Services Service line

  • Installation Service

    Mobile optimization and fleet deployment will often require appropriate vehicle Mounting Systems in order to safely secure computing hardware such as a Rugged Tablet PC or Rugged Handheld PDA.  Let Halltech help your organization to select and install the appropriate vehicle mounting systems. 

    By Halltech Environmental Inc. based in Guelph, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you