Hazardous Gas Detection Equipment For Health And Safety Available In Belgium
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD10P Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These GD10P infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and ...
-
Manufactured by DOD Technologies Incbased in USA
The XA-4000II personal four-gas detector is a wearable hazardous gas detector. It is worn within the breathing zone to detect four of the most common industrial gas hazards (CH4-CO-H2S-O2), keeping you safe within your working environment. When worker exposure exceeds pre-set limits the device’s audible, vibrating, and flashing LED alarms alert you to the gases present. Readings are ...
-
Manufactured by AFC International, Inc.based in USA
Your team works in a lot of different hazardous environments – and you want the same high level of toxic gas detection everywhere they go. The Rae Systems ConneXt Pack is the first and only turn key, wireless detection solution that can provide real time, man down alarms and alert you to atmospheric ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
The XDI Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatched number of configurations allowing for a simple stand alone 4~20mA transmitter or a CAN bus address system enabling networking of up to 64 process sensors with a local diagnostics port which allows interrogation using a PC. Network sensors may also provide individual independent 4~20mA outputs. A ...
-
Manufactured by Framo ASbased in NORWAY
Framo hydraulic fire water pumping systems, with single-stage pumps that rotate slowly during standby, offer a minimal start load and the best possible ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
The new PureAire Air check Lite is Smart Gas Monitor a low cost compact gas monitoring system that’s ideal for continuously monitoring gas cabinets, valve manifold boxes and process tool gas cabinets. Designed for Original Equipment manufacturers, (OEM) and larger installations, it features a sophisticated electronic “brain” built directly into the sensor electronics. This ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
IRmax is an infrared (IR) gas detector which delivers fast, fail-safe detection of hydrocarbon gases and vapours. The IRmax gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool or hand-held HART ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI S series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for the detection of common gas hazards. The S series transmitters are available for LEL (catalytic), LEL (IR) CH4, LEL (IR) HC, O2, H2S, CO, or CO2 (IR). The electronics are encased inside a potted package to avoid damage from mechanical abuse or corrosion, and this assembly is installed ...
-
Manufactured by Proportion-Air, Inc.based in USA
The ISQB series control valve is an electronic pressure regulator designed to precisely and proportionally control the pressure of gases based on an electronic command signal. The ISQB is an FM Approved Intrinsically Safe Valve approved for hazardous loactions. ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
The GDA-X is the newest addition to our successful GDA series. The GDA-X has the same scope of work as the GDA-FR, which is able to detect chemical substances and dangerous gaseous compounds, with an improved mode of operation for detecting slow-evaporating substances including many ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
The XDI Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatched number of configurations allowing for a simple stand alone 4~20mA transmitter or a CAN bus address system enabling networking of up to 64 process sensors with a local diagnostics port which allows interrogation using a PC, network sensors may also provide individual independent 4~20mA outputs. A ...
-
by Altezza LLPbased in KAZAKHSTAN
The GD10 Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and construction ...
-
Manufactured by ENMET, LLCbased in USA
CP-60 is a 1, 2, or 3 channel wall mount controller designed for monitoring up to three 4-20 mA inputs from remote gas sensor/transmitters or similar devices. The instrument provides 24 VDC power, audible/visual alarms, alarm ...
-
Manufactured by Accutron Instruments Inc.based in CANADA
Sentro 1 is the world’s foremost fixed gas detector for hazardous location gas detection. At the heart of Sentro 1 is the eModule; intelligent standardised gas sensing modules to cover a range of toxic and flammable gases. Dynamic and historic data is stored within each module together with the condition of the gas sensing element and its service ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long. Using superior 'Xenon Flash' technology the SafEye range is immune to false alarms caused by partial blockage and extreme weather conditions (fog, rain or snow) and direct or reflected sunlight, flame or other black ...
-
Manufactured by Drägerwerk AG & Co. KGaAbased in GERMANY
Dräger's X-zone 5500 brings a safer, more effective way to monitor hazardous gases--reinventing area monitoring. In combination with the Dräger X-am® 5000, 5100, or 5600 gas detection instruments, the X-zone® 5500 can be used for the measurement of up to six gases and extends the range of your portable gas detection technology ...
-
Manufactured by ENMET, LLCbased in USA
CP-10 is an economical, yet versatile single-channel controller designed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. This controller provides 24 VDC power, audio/visual alarms, alarm relays and other features. CP-10 is easy to install, designed for wall mounting and completely programmable from the front panel membrane ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you