Hazardous Gas Detection (Hazardous Gas Monitoring) Equipment Available In Virgin Islands
-
Manufactured by ENMET, LLCbased in USA
CP-10 is an economical, yet versatile single-channel controller designed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. This controller provides 24 VDC power, audio/visual alarms, alarm relays and other features. CP-10 is easy to install, designed for wall mounting and completely programmable from the front ...
-
Manufactured by ENMET, LLCbased in USA
CP-60 is a 1, 2, or 3 channel wall mount controller designed for monitoring up to three 4-20 mA inputs from remote gas sensor/transmitters or similar devices. The instrument provides 24 VDC power, audible/visual alarms, alarm ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD10P Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These GD10P infrared gas detectors differ from all other models, because they utilize silicon based ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
The FA200 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel ...
-
Manufactured by Sierra Monitor - Mine Safety Appliances Co (MSA)based in USA
Sierra Monitor's Sentry IT 32 Channel Controller is a powerful network-enabled hazardous gas detection system controller that can operate up to 32 detectors and interface with devices over Modbus RTU, analog 4-20 mA, Sentry PSG Bus, and conventional dry contact. As part of the Sentry IT line, the Sentry IT Controller is compatible with the ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
; built directly into the sensor electronics. This reliable hazardous gas detection system significantly reduces the labor and downtime commonly associated with gas detector maintenance and service.The instrument’s “smart” circuitry permits ex-situ or off-site calibration with a quick and simple plug-and-play ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI S series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for the detection of common gas hazards. The S series transmitters are available for LEL (catalytic), LEL (IR) CH4, LEL (IR) HC, O2, H2S, CO, or CO2 (IR). The electronics are encased inside a potted package to avoid damage ...
-
Manufactured by AFC International, Inc.based in USA
Your team works in a lot of different hazardous environments – and you want the same high level of toxic gas detection everywhere they go. The Rae Systems ConneXt Pack is the first and only turn key, wireless detection solution that can provide real time, man down alarms and alert you to atmospheric ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
IRmax is an infrared (IR) gas detector which delivers fast, fail-safe detection of hydrocarbon gases and vapours. The IRmax gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long. Using superior 'Xenon Flash' technology the SafEye range is immune to false alarms caused by partial blockage and extreme weather conditions (fog, rain or ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
The GDS 404 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of environments, from commercial premises through to heavy industrial applications requiring hazardous area sensing. Typical monitor locations are public buildings, boiler plant rooms, swimming pools, ...
-
Manufactured by Noventis Australia Pty Ltdbased in AUSTRALIA
with features that will provide an effective response to the detection of gas hazards in a wide range of industrial enviroments from boiler plant rooms, swimming pools, water treatment works, HVAC control systems, manufacturing and process ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
The GDA-X is the newest addition to our successful GDA series. The GDA-X has the same scope of work as the GDA-FR, which is able to detect chemical substances and dangerous gaseous compounds, with an improved mode of operation for detecting slow-evaporating substances including many ...
-
Manufactured by Drägerwerk AG & Co. KGaAbased in GERMANY
Dräger's X-zone 5500 brings a safer, more effective way to monitor hazardous gases--reinventing area monitoring. In combination with the Dräger X-am® 5000, 5100, or 5600 gas detection instruments, the X-zone® 5500 can be used for the measurement of up to six gases and extends the range of your portable gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you