Hazardous Gas Monitoring Equipment For Health And Safety In New Jersey
-
Manufactured by QED Environmental Systems, Incbased in USA
The GA5000 is an ATEX certified portable gas analyser for the landfill gas market. Easy to use and calibrate, the GA5000 benefits from our market leading reliability and helping you to standardise monitoring routines, whilst supporting environmental legislation ...
-
by Solvias AGbased in SWITZERLAND
The SAM GC-600 Chemical Hazards Monitor is a high-performance analyzer that is based on gas chromatograph technology. It was developed specifically for continuous chemical hazards monitoring, and is used where highly toxic or carcinogenic substances may be present in the production-plant air or in the workplace. Based on its high level of selectivity and sensitivity, as well as its low detection ...
-
Manufactured by Glasco Ultravioletbased in USA
The “IL-EXP” systems are manufactured in the USA and are designed to treat flows ranging from .25 to 1,000’s of gallons per minute. UV systems designed for oil and gas rig UV disinfection applications. Used in hazardous environments requiring ...
-
Manufactured by American Gas & Chemical Co. Ltdbased in USA
The SBG-200 is an affordable solid-state completely self-contained monitor capable of detecting a variety of toxic and flammable gases and vapors. Several sensors are available which allow it to be calibrated to alarm at gas concentrations well below their lower explosive limit or OSHA ...
-
Manufactured by Spectrex - Emerson Process Managementbased in USA
he Duct SafEye Open Path Detectors were specially designed and are widely used to monitor ingress of hazardous flammable gas concentrations into air intakes of turbine engines and HVAC air ducts. Duct applications require that the small path across an air inlet responds with a very high sensitivity, full scale of 1 LEL.m for 2-6.6 ft (0.6-2 m) wide inlet and full scale of 2.5 LEL.m for 6.6-23 ft ...
-
Manufactured by Delphian Corporationbased in USA
The SafeCAL module installs in a Class ABCD (FMRC) conduit box with a glass dome. A Delphian sensor attaches through gold plated keyed connectors and a weather-proof fitting for easy installation and reliable operation. The entire system is sealed. All calibration is completed without opening the explosion-proof housing. SafeCAL will endure temperatures from -40oC (-40oF) to +85oC (+185oF). It ...
-
Manufactured by ECSI International, Inc.based in USA
FOIDS is the most advanced fiber optic sensor technology available for fence/wall line perimeter monitoring and intrusion detection. The system uses single mode fiber optic cable and highly sensitive interferometry technology for intrusion detection along fences and walls up to a zone length of 3.5 miles. FOIDS detects climbing, cutting or pulling along the fence/wall ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
Manufactured by Mine Safety Appliances Co (MSA)based in USA
Ultima X Series Gas Detector for indoor or outdoor continuous monitoring of hazardous gases. Designed to provide thorough, continuous monitoring of many hazardous gases, the indoor/outdoor Ultima X Series Gas Monitors offer excellent performance and MSA quality craftsmanship. DuraSource Technology offers extended sensor life, while HART provides convenient setup, calibration and diagnostics. HART ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for group protection, area monitoring and providing a virtual fenceline, Detective+ is a rugged, interconnectable, multigas temporary area monitor. Building on Crowcon's experience in pioneering this category of detector, Detective+ has earned a reputation for reliability and versatility in demanding environments stretching from offshore platforms to the sands of the Middle East. Rugged ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
IRmax is an infrared (IR) gas detector which delivers fast, fail-safe detection of hydrocarbon gases and vapours. The IRmax gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool or hand-held HART ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI S series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for the detection of common gas hazards. The S series transmitters are available for LEL (catalytic), LEL (IR) CH4, LEL (IR) HC, O2, H2S, CO, or CO2 (IR). The electronics are encased inside a potted package to avoid damage from mechanical abuse or corrosion, and this assembly is installed ...
-
Manufactured by TSI Incorporatedbased in USA
The custom designed, NEMA 3R rated metal case protects the DustTrak II or DustTrak DRX Aerosol Monitor for long-term outdoor monitoring applications. The built-in electrical panel provides electrical connections to power the DustTrak Aerosol Monitor and optional accessories through the optional internal battery system or power supply adaptor. Built upon proven DustTrak technology that thousands ...
-
Manufactured by Gas Data Ltd - part of the ECOTEC Groupbased in UNITED KINGDOM
The Click! System fixed site on-line gas analyser gives users greater flexibility than conventional gas monitoring systems. In particular it allows operators to remotely monitor several sample points with just one analyser, 24 hours a day. With class-leading standards of accuracy and reliability the Click! System is used on some of the UK s largest Biogas producing sites, Biomethane plants and ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak Environmental Aerosol Monitor is an air monitoring system built to house DustTrak photometer models 8540 or 8543. DustTrak's early detection features allow quick response to exposure concerns as PM10, PM1 and PM2.5. This system is built upon proven DustTrak technology that thousands of people use every day. It can be applied in the fugitive emissions monitoring, the fence-line ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome 651 monitoring system from Arizona Instrument LLC is the system you need to solve your hydrogen sulfide monitoring problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location. Multiple units can be linked to form a perimeter monitoring system. Data logging and radio telemetry capabilities make downloading data convenient ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long. Using superior 'Xenon Flash' technology the SafEye range is immune to false alarms caused by partial blockage and extreme weather conditions (fog, rain or snow) and direct or reflected sunlight, flame or other black ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The Sm.OIL oil/water interface meter has the same functionality of our H.OIL oil/water interface meter. This compact unit only comes in one tape length (20m or 60’) on a small hand held frame designed for easy portability. The premium padded carry case comes included to protect your precision instrument from the elements. The Sm.OIL is used to measure the interface level between two liquids ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
The FA200 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel ...
-
Manufactured by RKI Instruments, Inc.based in USA
Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you