Hazardous Gas Equipment For Health And Safety Near New Brunswick
-
Manufactured by HERON Instruments Inc.based in CANADA
The Sm.OIL oil/water interface meter has the same functionality of our H.OIL oil/water interface meter. This compact unit only comes in one tape length (20m or 60’) on a small hand held frame designed for easy portability. The premium padded carry case comes included to protect your precision instrument from the elements. The Sm.OIL is used to measure the interface level between two liquids ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The H.OIL oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink (DNAPL), creating a layer under the water. The premium padded ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for group protection, area monitoring and providing a virtual fenceline, Detective+ is a rugged, interconnectable, multigas temporary area monitor. Building on Crowcon's experience in pioneering this category of detector, Detective+ has earned a reputation for reliability and versatility in demanding environments stretching from offshore platforms to the sands of the Middle East. Rugged ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
IRmax is an infrared (IR) gas detector which delivers fast, fail-safe detection of hydrocarbon gases and vapours. The IRmax gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool or hand-held HART ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI S series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for the detection of common gas hazards. The S series transmitters are available for LEL (catalytic), LEL (IR) CH4, LEL (IR) HC, O2, H2S, CO, or CO2 (IR). The electronics are encased inside a potted package to avoid damage from mechanical abuse or corrosion, and this assembly is installed ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
The multi-point system uses the same sampling arrangement as the single point system, but can monitor up to 16 separate sample lines on a sequential basis. The multi-point system provides a cost effective and low maintenance solution for monitoring gas hazards in buildings, pumping stations, storage areas etc. Each sample line is monitored for one minute on a sequential basis, and the samples are ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Crowcon offers open-path infra-red (IR) gas detection systems based on well-proven technology for fast detection of combustible gases and vapours over a line-of-sight up to 200m long. Using superior 'Xenon Flash' technology the SafEye range is immune to false alarms caused by partial blockage and extreme weather conditions (fog, rain or snow) and direct or reflected sunlight, flame or other black ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
The FA200 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This gamma radiation detector is part of the MeshGuard intelligent network. Simple to install and operate, it relays radiation data to other MeshGuard nodes until the data reaches the controller and reconfigures its data path if progress is blocked. MeshGuard Gamma is available with field-replaceable, pre-calibrated sensors specifically designed to sense X-ray and gamma radiation. It is also ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Detective Wireless is a module that can replace interconnecting cables for Detective and Detective+. Detective Wireless will transmit gas alert signals and other alarms wirelessly between Detective units using a 433MHz signal up to 100 metres in distance. Detective Wireless uses the proven RICOCHET mesh network. When establishing a mesh network, Detective Wireless automatically selects the best ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
The Crowcon Hydra Addressable Gas Detection System is designed to monitor toxic and/or flammable gas hazards. particularly in car park applications. Addressibility significantly reduces installation costs and makes savings through effective control of ventilation fans achievable - for example running fans at full power only when gas levels rise. Hydra is available in two versions, allowing ...
-
Manufactured by Gas Data Ltd - part of the ECOTEC Groupbased in UNITED KINGDOM
The Click! System fixed site on-line gas analyser gives users greater flexibility than conventional gas monitoring systems. In particular it allows operators to remotely monitor several sample points with just one analyser, 24 hours a day. With class-leading standards of accuracy and reliability the Click! System is used on some of the UK s largest Biogas producing sites, Biomethane plants and ...
-
Manufactured by Mine Safety Appliances Co (MSA)based in USA
Ultima X Series Gas Detector for indoor or outdoor continuous monitoring of hazardous gases. Designed to provide thorough, continuous monitoring of many hazardous gases, the indoor/outdoor Ultima X Series Gas Monitors offer excellent performance and MSA quality craftsmanship. DuraSource Technology offers extended sensor life, while HART provides convenient setup, calibration and diagnostics. HART ...
-
Manufactured by Miller Fall Protection - part of Honeywell Safetybased in USA
The new patent-pending Miller DuraSeal Self-Retracting Lifeline (SRL) is designed to perform in the harshest environments including onshore and offshore oil and gas, mining and petrochemical. The sealed technology, reusable brake system, field replaceable lifeline and corrosion resistant materials keep the product in the field to lower your cost of ...
-
Manufactured by Spectrex - Emerson Process Managementbased in USA
he Duct SafEye Open Path Detectors were specially designed and are widely used to monitor ingress of hazardous flammable gas concentrations into air intakes of turbine engines and HVAC air ducts. Duct applications require that the small path across an air inlet responds with a very high sensitivity, full scale of 1 LEL.m for 2-6.6 ft (0.6-2 m) wide inlet and full scale of 2.5 LEL.m for 6.6-23 ft ...
-
by Solvias AGbased in SWITZERLAND
The SAM GC-600 Chemical Hazards Monitor is a high-performance analyzer that is based on gas chromatograph technology. It was developed specifically for continuous chemical hazards monitoring, and is used where highly toxic or carcinogenic substances may be present in the production-plant air or in the workplace. Based on its high level of selectivity and sensitivity, as well as its low detection ...
-
Manufactured by Drägerwerk AG & Co. KGaAbased in GERMANY
Dräger's X-zone 5500 brings a safer, more effective way to monitor hazardous gases--reinventing area monitoring. In combination with the Dräger X-am® 5000, 5100, or 5600 gas detection instruments, the X-zone® 5500 can be used for the measurement of up to six gases and extends the range of your portable gas detection technology ...
-
Manufactured by Drägerwerk AG & Co. KGaAbased in GERMANY
Safety in the workplace always takes top priority. The Dräger Pac 7000 provides a reliable warning against dangerous concentrations of 12 different gases depending on the sensor selection. Another unique option to the device is its five-year warranty for the H2S, O2 and CO ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High specification process oxygen analyzer, designed for ultimate monitoring performance. The OxyExact safe area oxygen analyzer combines high precision Paramagnetic O2 sensing technology into a flexible and robust safety-enhanced design, optimized to meet the needs of demanding process monitoring applications like feedstock purity testing and clean up, hydrogen and chlorine production, solvent ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you