ASTM standard News
-
ASTM F2372 - 11 standard consumer safety performance specification for shopping carts
1. Scope 1.1 This consumer safety performance specification covers performance requirements, test methods, and labeling requirements for shopping carts and restraint systems. 1.2 This specification is intended to cover children who are at least six months of age and at least 15 lb (7 kg) up to children who are not more than four years of age and who weigh no more ...
-
ASTM F2372 - 11a Standard Consumer Safety Performance Specification for Shopping Carts
1. Scope 1.1 This consumer safety performance specification covers performance requirements, test methods, and labeling requirements for shopping carts and restraint systems. 1.2 This specification is intended to cover children who are at least six months of age and at least 15 lb (7 ...
-
ASTM D5631 - 11 standard practice for handling, transportation, and storage of Halon 1301, Bromotrifluoromethane (CF3Br)
This practice provides requirements for the handling, transportation, and storage of Halon 1301 encountered in distribution through both commercial and military channels. It is intended to ensure that Halon 1301 is handled, transported, and stored in such a way that its physical property values are not degraded. Transport may be by various means, such as, but not limited to, highway, rail, water, ...
-
ASTM D4081 - 00(2011) standard specification for drycleaning-grade perchloroethylene
This specification covers dry cleaning-grade perchloroethylene suitable for use in the dry cleaning industry. Materials shall be tested and the individual grades shall conform to specified values of appearance, water content, residual odor, specific gravity, non-volatile ...
-
ASTM D4079 - 00(2011) standard specification for vapor-degreasing grade methylene chloride
This specification covers vapor-degreasing grade methylene chloride. Vapor-degreasing grade methylene chloride shall be subjected to different tests so as to determine properties such as specific gravity, distillation range at initial boiling point, distillation range at dry ...
-
ASTM D4504 - 94(2011) standard specification for molded polyethylene open-head-pails for industrial shipping of nonhazardous goods
This specification establishes the performance requirements and test methods for molded polyethylene open-head, self-supporting, and nonreusable pails used in packaging and transporting nonhazardous goods. The products for packaging in the open-head pails may be in ...
-
ASTM F2896 - 11 standard specification for reinforced polyethylene composite pipe for the transport of oil and gas and hazardous liquids
1. Scope 1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, and markings for on-site manufactured multilayer reinforced polyethylene composite pipe. It covers nominal sizes 6 in. through 36 in. (150 mm through 915 mm). These multilayered reinforced polyethylene composite pipe ...
-
ASTM E2863 - 11 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
Because of safety considerations, regulatory agencies (for example, U.S. Department of Transportation) require periodic tests of pressurized vessels used in commercial aviation. (see Section 49, Code of Federal Regulations). AE esting has become accepted as an alternative to the common hydrostatic proof test. An AE test should not be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you