Hazardous Waste Transport Equipment For Health And Safety Near Solomon Islands
-
Manufactured by EnviroMasterbased in AUSTRALIA
An award-winning greener, safer, easier and more compliant way to contain and transport a variety of dangerous goods and hazardous waste, in particular asbestos. Hazibag is a flexible intermediate bulk container (IBC) which is UN approved for Packing Groups II and III. It was developed to overcome some of the limitations of existing, less practical, non-compliant hazardous waste collection ...
-
Manufactured by Envirosmartbased in AUSTRALIA
Portable containment bunding products are being used in increasing numbers as a temporary storage solution for liquids that may be potentially hazardous to the environment. There is a wide choice of product and the correct selection is dependent on the end application. The liners can be manufactured from PVC, polyethylene or Aeon Elvaloy. Portabund Liners are suitable for chemical transfers, ...
-
Manufactured by Mil-tekbased in DENMARK
Waste Compactors model X-Press are unique compactor solutions for compacting general waste into manageable plastic bags. The volume reduction achieved by compacting the waste is at a ratio of up to 10:1. The X-Press waste compactors can either be located close to the source of waste or in a designated area where the bags can be placed directly into ...
-
Manufactured by Mil-tekbased in DENMARK
Waste Compactors model X-Press are unique compactor solutions for compacting general waste into manageable plastic bags. The volume reduction achieved by compacting the waste is at a ratio of up to 10:1. The X-Press waste compactors can either be located close to the source of waste or in a designated area where the bags can be placed directly into bins/skips. By compacting your general and food ...
-
Manufactured by Mil-tekbased in DENMARK
X-PRESS GENERAL WASTE COMPACTOR MODELS 300 AND 400. The waste press Models 300 and 400 can be fitted with wheels making it easy to move the waste compactor around to various locations. Being mobile also makes cleaning the waste compactor much easier. Alternatively, the waste press models 300 and 400 can be fastened to the floor, perfect for uneven ground and offshore ...
-
Manufactured by Mil-tekbased in DENMARK
The waste press Models 300 can be fitted with wheels making it easy to move the waste compactor around to various locations. Being mobile also makes cleaning the waste compactor much easier. Alternatively, the waste press models 300 and 400 can be fastened to the floor, perfect for uneven ground and offshore ...
-
Manufactured by SupaVac - Poche Engineering Pty Ltdbased in AUSTRALIA
The SV110-V Slurry/Solid Pump delivers over 25”Hg of vacuum whilst generating high inline convey velocities. The unit requires only 280CFM at 85psi to 100psi and can transfer heavy sediment with a high solids content up to a rate of 18m3/hr @SG1.0 ...
-
Manufactured by SupaVac - Poche Engineering Pty Ltdbased in AUSTRALIA
Introducing the NEW SV510 Heavy Duty Solids Pump designed to transfer up to 45m3/hour @SG1.0(198USGPM) of semi viscous muds and various materials via vacuum load or top load gravity feed. With its ompact design and relatively small footprint, this SV510 is designed with serious performance enhancements. The SV510 Heavy Duty Solids Pump is completely air powered and operated which ...
-
Manufactured by SupaVac - Poche Engineering Pty Ltdbased in AUSTRALIA
The SV250-V Mobile Sludge Pump is designed to transfer an extremely wide array of heavy sludges via 100mm suction and discharge ...
-
Manufactured by SupaVac - Poche Engineering Pty Ltdbased in AUSTRALIA
The SV E-Vac In Line Vacuum Pump is designed as an in line system allowing the conversion of a standard pipeline into a fixed vacuum ...
-
Manufactured by Ultra Tech International, Inc.based in USA
Safely Store Multiple Drums Outdoors Available in 8, 12, 16 and 20-drum models. Extender kits are available to expand capacity beyond 20-drums. All polyethylene construction - offering excellent chemical resistance, will not rust or corrode. Use optional Ramp (p/n 0676) for easier drum handling - stores inside HardTop when not in use. Low profile (8 3/4') containment pallet positions drum-tops at ...
-
Manufactured by Ultra Tech International, Inc.based in USA
Available in 8, 12, 16 and 20-drum models. Extender kits are available to expand capacity beyond 20-drums. All polyethylene construction — offering excellent chemical resistance, will not rust or corrode. Use optional Ramp (p/n 0676) for easier drum handling - stores inside Hard Top when not in use. Low profile (8 3/4") containment pallet positions drum-tops at a safe, convenient level to ...
-
Manufactured by Ultra Tech International, Inc.based in USA
Low profile, modular spill decks allow you to design and create a spill containment system that meets your specific ...
-
Manufactured by Regain Materialsbased in AUSTRALIA
Regain’s robust proprietary technology accepts SPL with its inherent variation in size and chemical composition, eliminates the cyanide and explosive gas hazards and refines the material to manufacture high quality products. Regain takes SPL as it is delined from the reduction cells (pots) and processes it at the smelter site through a low capital cost detoxification system that eliminates ...
-
Manufactured by Vaughan Company., Inc.based in USA
Automotive / Steel. Automotive manufacturing and steel mills produce waste solids that plug conventional non-clog ...
-
Manufactured by Dynapumpsbased in AUSTRALIA
The SV500 High Volume Mining pump is primarily designed to transfer up to 60m3/hour SG1.0(264USGPM) of semi viscous muds and slimes. The unit operates via a twin tank system which allows one tank to fill whilst the other discharges giving virtually constant operation. The SV500 High Volume Mining Slimes pump is completely air powered and operated which renders the unit intrinsically safe with a ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non-contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through aspiration ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non-contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through aspiration ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Reliable waste transfer equipment: We design, manufacture and install simple, smart and reliable waste moving and storage systems, for safe and smooth displacement of waste materials to be incinerated. The complete process of proper and secure storing, feeding, burning and residue removal is fully integrated in our basic ...
-
ShowcaseManufactured by OSEI - Oil Spill Eater International, Corpbased in USA
Oil Spill Eater II (OSE II) is the world’s most environmentally safe and cost effective bioremediation process for the mitigation of hazardous waste, spills and contamination virtually anywhere of any size, large or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you