Only show results available in Texas? Ok

Human Vibration services for Health and Safety

  • Industrial Hygiene Services

    During work, employee gets exposed to different types of Health Hazards. Protecting employees from adverse health effects due to chemical, biological and physical health hazards becomes very much important business as it is directly related to productivity, regulatory compliance & health of people.

    By Green Circle, Inc. based in Vadodara, INDIA.

  • Specific Benefits of Phase Angle technology

    Phase Angle technology detects fluctuations of motor torque. These fluctuations are caused by mechanical disturbances inside the monitored machine. The path from mechanical impacts to torque is short and direct. The same disturbances cause the change of vibration signatures but in this case whole body of monitoring machine is involved. The ...

    By iAdept Marketing based in New Delhi, INDIA.

  • Vibration Monitoring Services

    The Vibration in the workplace can cause both discomfort and illness. Depending on the nature of the exposure it is classified as hand-arm vibration (HAV) or whole-body vibration (WBV). The illness most closely associated with hand-arm vibration is vibration white finger. Whole body vibration is associated with a wide range of problem such as back ...

    By Euro Safety and Health based in Shrewsbury, UNITED KINGDOM.

  • Environmental Vibration

    Ground, Building and Plant Vibration. A complete range of vibration measurement, evaluation and control services for the construction and demolition industries that extend well beyond conventional monitoring.

    By Industrial Noise and Vibration Centre based in Slough, UNITED KINGDOM. from Vibration Service line

  • Hand Arm Vibration Syndrome Services

    Hand-arm vibration syndrome (HAVS) is a widespread industrial disease affecting tens of thousands of workers which can cause vibration-induced white finger (VWF). Attacks are painful and can result in the loss of the ability to grip properly. Any vibrating tool or process which causes tingling or numbness after 5-10 minutes is suspect. Where ...

    By Ethos Environmental Ltd. based in Edinburgh, UNITED KINGDOM. from Noise & Vibration Services Service line

  • Vibrock - Vibration Services

    Vibrock have the capability  to carry out vibration assessments to ensure compliance with acceptable levels at existing or proposed vibration sensitive sites. Vibrock's highly experienced and qualified team have considerable knowledge and expertise in the following services:

    By Vibrock Limited based in Heanor, UNITED KINGDOM. from Consultancy Service line

  • Environmental Resources Valuation Services

    Environmental and cultural resources contribute to human wellbeing and hence have economic value. Valuation methods entail collecting quantitative evidence in this regard which is essential for efficient decision-making, for example: Proving ‘value for money’ for environmental investments where the benefits are assumed to be intangible ...

    By Economics for the Environment Consultancy (EFTEC) based in London, UNITED KINGDOM.

  • Environmental Impact Assessment

    Environmental Impact Assessment (EIA) is one of the corner stones of the UK planning system. EIA serves to deliver projects that have considered the potential environmental impacts associated with a large development. The EIA process should identify potential environmental issues so that solutions may be implemented to minimise the potential ...

    By Tivoli Consulting Ltd based in Cheltenham, UNITED KINGDOM.

  • Waste Electrical and Electronic Equipment Recycling Services

    Our firm collects and stores all sort of obsolescent and scrapped semi-conductor electronic components for recycling purpose. Akademi Çevre collects new or renewed active components, old active and passive  components, BGA components, PGA components, SMT components, DIP components, Xilinx, Virtex II, Virtex III, Altera, PMC processors ...

    By Akademi Cevre based in Tuzla/Istanbul, TURKEY.

  • Noise and Vibration Monitoring

    AXIS environmental services carry out noise and vibration monitoring and assessment. All environmental monitoring is undertaken in accordance with: ISO 1996: Acoustics Description and Measurement of Environmental Noise. BS 4142: Method for rating industrial noise affecting mixed residential and industrial areas. The EPA publication Guidance Note ...

    By Axis Environmental Services based in Limerick, IRELAND. from Noise and Vibration Monitoring Services Service line

  • Environmental Services

    Our Environmental Services include: Stack Emission Testing to a credible performance standard, Air Emissions Monitoring, Environmental Consultancy, Process Abatement.

    By Harmonic Biosphere Company Limited based in Dar es Salaam, TANZANIA.

  • Industrial Hygiene and Occupational Monitoring

    OES can work with your company to ensure compliance with the requirements of Irish and EU legislation relating to workplace exposure of chemical agents and prevent expensive litigation or claims. OES can undertake workplace occupational hygiene surveys at your facility to establish where you stand with regard to ergonomics, employee welfare and ...

    By OES Consulting based in Tralee, IRELAND. from Safety Services Service line

  • Demolition and Construction Services

    Southdowns advises promoters, developers, contractors and Local Authorities on likely construction noise and vibration impacts and comprehensive management strategies. Consultants have extensive experience in preparing and negotiating prior consent for works under Section 61 of the Control of Pollution Act 1974, and in advising Local Authorities ...

    By Southdowns Environmental Consultants Ltd based in Lewes, UNITED KINGDOM.

  • Vibration Services

    Vibration control and isolation is a specialist area in which NVM has a proven track record gained through working on many diverse projects.

    By Noise and Vibration Management Ltd (NVM) based in UNITED KINGDOM.

  • Human Vibration Assessment Service

    Hand Arm Vibration (HAV): The use of some types of tools, for example, grinders, pneumatic hammers, impact wrenches and horticultural equipment can result in vibration being transmitted into the hand and arms of the users.Exposure to high levels of vibration over long periods can result in injury to the hand-arm system. The most common type of ...

    By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.

  • Tool Vibration Testing Service

    Reactec Ltd provide a tool vibration testing service. All measurements will be taken using a Larson Davies HVM100 Human Vibration Analyser with a triaxial accelerometer. Measurements will be undertaken in general accordance with BS EN ISO 5349:2001 Part s 1 & 2.

    By Reactec Ltd based in Edinburgh, UNITED KINGDOM.

  • Vibrock - Occupational Exposure Monitoring Services

    Each consultation is carefully carried out within The Health and Safety at Work Act 1974, designed to help prevent accidents and safeguard the health and welfare of employees and others in the workplace environment. The Control of Substances Hazardous to Health (COSHH) Regulations, the Control of Noise at Work Regulations and legislation such as ...

    By Vibrock Limited based in Heanor, UNITED KINGDOM. from Consultancy Service line

  • Whole Body Vibration Service (WBV )

    Whole Body Vibration assessment and control. We provide a comprehensive Whole Body Vibration (WBV) assessment service against the requirements of the regulations. This can also be extended to include design and development work plus engineering recommendations to reduce the levels of vibration. We can also provide WBV assessment and management ...

    By Industrial Noise and Vibration Centre based in Slough, UNITED KINGDOM. from Vibration Service line

  • Vibration Assessment (BS 6472)

    BS 6472:1992 – Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz) This British Standard provides an overall guide to those who are exposed to building vibration with the frequency of 1 Hz up to 80 Hz.  BS 6472 explains the application of weighting curves, blast-induced vibration and the current methods of ...

    By Sound Planning Limited based in Lower Bourne, UNITED KINGDOM. from Consultancy Services Service line

  • Engineering Service

    Conceptual Design - Design begins with defining the overall system concept, scope, and approach. Block diagrams express this concept. From there, we go to selecting generic types of control equipment, setting performance criteria, and planning locations. Revere applies sound engineering judgment based on many years of experience with a wide range ...

    By Revere Control Systems based in Birmingham, ALABAMA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you