Hygiene Monitoring Equipment For Health And Safety Available In North Dakota
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. Typically, the sampler would be worn for the the full 8-hour workday. ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
For indoor applications, the MerPAS® sampler is deployed without the protective jar housing regardless of Hg air concentration since the sample does not need protection from the elements. Mounting stands may be purchased from Tekran if needed. Sample time is determined by monitoring goals and expected air Hg levels. The yellow body diffusive barrier is used due to better performance at low ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
GT5000 Terra is the worlds smallest portable and splashproof multigas FTIR analyzer. It can measure up to 50 gases simultaneously, making it possible for you to detect the unexpected. Equipped with wireless communication, you can monitor results in real-time on your laptop or ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Highly Accurate, Stable, Quantitative, and Remotely Controllable Gas Monitoring System. Advanced Energy's Innova 1512 is based on the photoacoustic infrared spectroscopy and delivers superior sensitivity in a very compact form factor. Extremely versatile by design, the 1512 is capable of measuring almost any gas that absorbs infrared light. Leverages the unique strengths of the photoacoustic ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Ensuring worker safety from toxic levels of air mercury requires accurate and precise hand-held mercury monitors. The Tekran® JITRbug Instrument is designed as a rapid performance assessment tool for hand-held mercury industrial hygiene monitors. The system uses a built-in saturated mercury source to produce mercury test atmospheres of known concentrations. This is used to audit external ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling time is typically hours up to 7 days, depending on the expected Hg levels and project ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Light-915M2 is a compact, portable mercury analyzer designed for convenient direct Hg measurement in air. High accuracy and real-time operation along with small size and weight make it an excellent device for field ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Inhalation of vapor is the primary route of elemental mercury toxicity in the workplace environment. The Tekran 2537Xi-IH Industrial Hygiene Monitor provides continual analysis of Hg levels in workplace air in a simple to deploy turn-key unit. This system can be customized according to customer needs including: number of monitoring locations, audible and visual alarms, and site-specific visual ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
BA-15 is a multifunctional benzene analyzer based on the differential absorption spectrometry using the direct Zeeman effect. Due to the low power consumption and light weight the spectrometer is especially useful in the natural gas production and processing industries, in which benzene is often main ...
-
Manufactured by Hal Technology, LLCbased in USA
HalTech introduces a brand new designed HVX501 handheld volatile organic compound (VOC) meter and it can easily take a quick and accurate measurement of VOC levels. Featuring the best-available-on-the-market photo-ionization-detector (PID) sensor technology, the HVX501 can detect a wide variety of organic compounds and some inorganic gases (a few hundreds of chemicals) in ambient air. ...
-
Manufactured by Cirrus Research plcbased in UNITED KINGDOM
The doseBadge is the original wireless personal noise dosimeter. It is the ideal tool to carry out occupational and industrial hygiene noise measurements and provides a unique solution for these applications. Combining an innovative design with simple, robust and reliable operation, the doseBadge weighs only 51g/1.8oz. With no cables, controls or displays, the doseBadge can be worn in areas where ...
-
Manufactured by Spectra Scientific, Inc.based in CANADA
The NoisePro series of personal noise dosimeters helps industrial hygiene and safety professionals monitor noise exposure efficiently and provides tools to empower worker self-management of noise exposure. The NoisePro's compact, yet rugged IP-65 casing, intrinsic safety certifications and advanced features make it well-suited for a wide-range of ...
-
Manufactured by Fecosan S.Lbased in SPAIN
Induction flow meters of the FLONET FN 20XX type series are intended for professional application and measurement of flow rates electrically-conductive liquids in water and heat-supply systems, food-procesing and chemical industries. They meet the most demanding requirements on high measurement accuracy, long-term stability and hygienic standard. Measurements in both directions of flow are ...
-
Manufactured by Sanipurbased in ITALY
SaniWare Water Hygiene Monitor is a multi-parametric panel and Data Log for VHA 1061 Water Hygiene Compliance and integrates advanced sensing, instrumentation, fluid handling, and data communications technologies to bring you the most sophisticated water hygiene monitoring in the marketplace. The simple, intuitive programming makes it easy to configure SaniWare to control or monitor multiple ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The Ion Science MiniPID 2 HS is a simple plug and play sensor designed to detect a wide range of volatile organic compound gases (VOCs) at sub ppb concentrations. Designed for OEMs, the MiniPID 2 HS high sensitivity PID sensor is the latest in the range of PID sensors from Ion Science for sub-ppb level detection. The ground-breaking MiniPID 2 HS is 15 times more sensitive than the existing ...
-
Manufactured by MESA Specialty Gases & Equipmentbased in USA
Small portable and disposable calibration gas cylinders offer a cost-effective alternative for low calibration gas volume applications such as found in Industrial Hygiene and Laboratory instrument gas calibration. In order to guarantee the accuracy of these calibration gas mixtures, MESA Specialty Gases follows the same NIST traceable procedures to manufacture the small portable disposable ...
-
Manufactured by NEU-JKF Groupbased in FRANCE
Vacuum cleaning has always been an industrial concern. Today, safety measures, hygiene and productivity demand centralised systems using a high vacuum, as an effective extension to dust control ...
-
Manufactured by TSI Incorporatedbased in USA
The DRX Aerosol Monitor can measure both mass and size fraction at the same time and provides a gravimetric sample. It is suitable for indoor and outdoor applications, industrial and occupational hygiene, baseline screening, remote monitoring and research ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak II Aerosol Monitor 8530 is a desktop battery-operated, data-logging, single-channel, light-scattering laser photometer that gives you real-time aerosol mass readings and collects a gravimetric sample. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance. It is suitable for clean office ...
-
based in AUSTRIA
HygieneChek dip slides are an easy-to-use, reliable and economic microbiological testing and transportation system. It is based on a double-sided agar paddle which is used to detect and identify various microorganisms commonly found in foods, cosmetics and pharmaceuticals. The only equipment required for HygieneChek is an incubator. An optional extra would be a bench top ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you