Only show results available in Virginia? Ok

Industrial Hazards Applications

  • Premium

    AutoChem - Process Development and Scale-Up

    Process Development in the chemical industry requires a profound and comprehensive knowledge of the processes involved and is governed by a triangular relationship between `Economy - Safety - Environment`.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Process Analytics - Chemical Processes

    METTLER TOLEDO/INGOLD solutions cover a wide range of process conditions found in chemical processes. Our products master even most demanding chemical environments with high temperature and pressure - the industry proven design ensures high safety and reliability. Certificates as ATEX, FM, CSA, 3.1B are available with our products to comply with plant safety requirements. Our application solutions can be integrated into plant wide process control and asset management systems.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Industrial Weighing - Hazardous Area (Ex) Weighing

    Explosive areas need special consideration, but performance should not be compromised. That’s why METTLER TOLEDO has built the most extensive range of hazardous area (Ex) products available from a range of compact, bench, floor, custom, load cells and vehicle scales up to 2000 tons. Many of our products comply with the new European ATEX directive for Group 2 and 3 devices, Factory Mutual, Canadian Standards as well as many country specific regulations.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Hazardous chemicals management for the health care industry

    By RegScan, Inc. based in Williamsport, PENNSYLVANIA (USA).

  • Premium

    Industrial stack emission TOC monitoring

    By Pollution Srl based in Budrio (Bologna), ITALY.

  • Premium

    Compressed air, gas and vacuum solutions for chemical- and process technology

    The chemical industry is completely dependent on reliable supplies of process gas. But each process is different and requires specialized machines. The solution: the efficient compressors and blowers from AERZEN – proven in numerous operating environments, suited for almost all media, unrivalled in their reliability, and adaptable to individual client specifications. Can the solution really be this easy? It can! The EU directives for explosion protection play an important role, among others, in the chemical industry. AERZEN always offers suitable solutions with its products.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Mining & minerals solutions for man camps industry

    In remote locations and mine sites distant from the nearest outpost, WesTech provides package plants for water treatment and for wastewater process that allow for drinking water to be made onsite and basic levels of sanitary safety to be met, allowing for continued production and a healthier site and workforce.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Sound instrumentation for industrial hygiene

    Industrial hygiene is separated into two main applications - Noise at Work and Human Vibration. Norsonic has during the past year expanded the product portfolio to cover both applications. By close cooperation with our customers and health and safety research institutes we have designed a carefully balanced selection of measuring tools and application software that covers both the vibration and noise domain.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Spill Drainage for the Spill Response Industry

    By Chemtex, Inc. based in Cumberland, RHODE ISLAND (USA).

  • Premium

    Specialty Cleaners and Lubricants for Healthcare Industry

    Our powerful, earth-friendly cleaners are available in a wide range of formulas to meet specific cleaning requirements.  Our cleaners are designed to quickly and effeciently remove blood, feces, urine, mucus, fat, sweat, tissue, and other biological debris.  Common uses include cleaning diagnostic and surgical instruments, life-support devices, hospital furnishings, and institutional linens.  For most applications a 0.5% - 2.0% solution is effective, and validation methods are available.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Specialty Cleaners and Lubricants for Food & Beverage Industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available upon request. Our lab will work with you to determine the best cleaner for your application.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Strategic market research solutions for fire industry

    Lives are saved everyday with the critical information and training provided by PennWell’s Fire Group. For more than 135 years, PennWell has served the fire industry with an unsurpassed reputation for quality training with a long-standing mission to “Train the fire service.” We hold ourselves to the strictest of standards, ensuring that our service to the fire industry equals the fire industry’s tireless service to us all.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Solutions for the healthcare industry

    A range of tools and support services for diverse heathcare applications, including: CT and MR Imaging, X-ray Imaging, Fluoride in toothpaste, Coating analysis of medical instruments.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Odour nuisance assessment for industrial facilities

    Assessment of odour impacts from industrial facilities is increasingly required for planning and IPPC/EPR permitting.

    CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies.

    In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to establish a clear link between the operation of the plant, the resulting emissions and the odour impact.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Industrial Facilities

    The dust generated at various times during the production and processing of materials in factories is often unpleasant and pollutes the environment. Such situations arise, for example, in steel production, when disposing of slag, in cement production or in the lumber industry. EmiControls products have the versatility and flexibility to be adapted to a wide and diverse range of situations, enabling measures to be taken that combat these sources of dust effectively and drastically reduce their levels inside and outside the plant.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Hazard labeling

    Along with the creation of a standardized SDS, it is just as critical to ensure a seamless process to create hazard labels. Our hazard label software systems is integrated with our SDS authoring engine. The easy-to-use functionality ensures that any updates to the SDSs are reflected on all hazardous labels, ensuring accuracy and consistency.

    By UL The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Infrared sources for industrial and safety sector

    Axetris infrared sources are used in a variety of industrial applications: Combustible and Toxic Gas Detection, Refrigerant Monitoring, SF6 Monitoring, Fruit Ripening Monitoring, Flame Detection, Liquid Analysis using Attenuated Total Reflection ATR, Semiconductor Fabrication.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you