Dust Ignition (Industrial Hygiene) Equipment
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
Legally certified explosion proof/dust ignition proof. Less than 10 Ohms of resistivity. Electrically operated. HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
Legally certified explosion proof/dust ignition proof. Less than 10 Ohms of resistivity. HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility. Designed for the ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
All stainless steel SAE 304 construction (except cart). Less than 10 Ohms of resistivity. This unit is equipped with a true HEPA (H14) Filter located downstream of the motor. This unit has been designed for the recovery of flammable and toxic powders such as unspent gunpowder and lead contaminants. This unit is ideal for shooting ranges, army ammunition depots, manufacturers of firearms and ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
Legally certified explosion proof/dust ignition proof. Less than 10 Ohms of resistivity. HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility. Cleanroom ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
All stainless steel SAE 304 construction. Less than 10 Ohms of resistivity. This unit is equipped with a true HEPA Filter (H14) located downstream of the motor. This unit also equipped with a Middle Ring and Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors. This unit can be used for general maintenance in hazardous locations. This is a wet & dry vacuum cleaner. ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The VIDEOSCOPE XT is a truly industrial-grade borescope camera that has been designed for hazardous environments. This US-made inspection system has been tested and certified under MIL-STD 810G method 511.6 (explosive atmosphere) in accordance with UL standards for NFPA 70: class 1 division 2 requirements for hazardous locations. This borescope camera is also UL certified for Class I Division 2 ...
-
Manufactured by Diversitechbased in CANADA
or explosion. Our explosion/dust ignition-proof vacuums comply with NFPA 484 guidelines and are an effective tool for good housekeeping practice as per OSHA. All the electrical components, including the motor and starter, are totally enclosed so there is no source of ignition. Our explosion/dust ignition proof ...
-
Manufactured by Conveyor Components Companybased in USA
The NEW Model CT comprised of a Control Unit and Tilt Probe senses the presence or absence of material. The new intrinsically safe, cULus Listed Control Unit is enclosed in rugged cast aluminum housing with LED Indicator lights and surface mount printed circuit board. Weatherproof, Dust-Ignition Proof and Explosion Proof models are ...
-
Manufactured by IEP Technologies, LLC - HOERBIGER Safety Solutionsbased in USA
The PistonFire suppressor consists of a pressurized suppressant storage cylinder and a valve body that contains a dust-ignition proof, weatherproof National Electrical Manufacture’s Association (“NEMA”) enclosure. The NEMA enclosure houses the actuating mechanism, pressure switch, pressure gauge, fill valve, OSHA ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
- contains 128 Filter Tubes. This unit is also equipped with a maintenance free, beltless side chanel blower with a 25000+ hour lifespan. The 3-phase explosion proof/dust ignition proof motor is fully enclosed in a protective cabinet. This unit is desgined to be attached to process machines and for general cleanup in hazardous locations. This unit can ...
-
Manufactured by Palmetto Industries International Inc.based in USA
Type B bags are constructed from insulating fabric but have a breakdown voltage less than 6 kV. This provision prevents the risk of energetic propagating brush discharges which can ignite dust-air mixtures and flammable gases and solvent vapors. Type B bags may be used in the presence of the combustible dusts with MIE of greater than ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
free, beltless side chanel blower with a 25000+ hour lifespan. The 3-phase explosion proof/dust ignition proof motor is fully enclosed in a protective cabinet. This unit is desgined to be attached to process machines and for general cleanup in hazardous locations. This unit can also be used for the recovery of tablets in the pharmaceutical ...
-
Manufactured by PYCO, LLCbased in USA
Pyco aluminum explosion proof heads come in simplex, duplex or triplex constructions with 12" or 3 4" npt threads. They are also suitable for most din size ...
-
Manufactured by Gentos Measurement & Control Co., Ltdbased in CHINA
of them separately: Explosion-proof Distribution Box: An Explosion-proof Distribution Box, also known as an Explosion-proof Junction Box or Enclosure, is designed to contain electrical equipment and wiring in potentially hazardous environments. These environments may have flammable gases, vapors, or dust particles that could ignite and cause an ...
-
Manufactured by Conveyor Components Companybased in USA
The Model CMS is a direct drive control that indicates when rotating equipment has ceased to turn. The output contacts of the Model CMS can control up to two separate circuits, one for machinery shutdown and one for an ...
-
Manufactured by Advanced Sensor Technologies, Inc. (ASTI)based in USA
Chemically & Mechanically Resilient Polycarbonate NEMA 4X / CSA 4 IP66 Enclosure - Standard 1/2 DIN Cutout. 2-Wire Loop-Powered 24VDC Power Operation with scalable 4-20mA analog current loop output standard. Second 4-20mA loop-powered output available to send process temperature reading in addition to measured analytical liquid parameter. Automatic Temperature Compensation via 100 or 1000 Ohm ...
-
Manufactured by Deeter Electronics Ltdbased in UNITED KINGDOM
Manufactured by BEKA Associates, the BA304SG range is a lower cost alternative Ex d flameproof indicator. A 4-20mA Loop powered indicator, the Ex eb increased safety and Ex tb certification allows for installation in Zones 1, 2, 21 or ...
-
Manufactured by Automated Valve & Controlbased in USA
Andco electric linear and rotary actuators are self-contained, electro-mechanical actuators designed for precise positioning and automation of material handling or flow control equipment. Linear actuators are available in acme screw or ball screw design with a wide variety of speeds, stroke lengths, thrusts and mounting options. Multi-turn rotary actuators are worm-gear driven, designed for ...
-
Manufactured by Conveyor Components Companybased in USA
The Model RSB is a heavy-duty safety control that provides a positive shut off of dangerous equipment in an emergency. A cable pulled by endangered personnel actuates it. The output contacts of the Model RS can control up to two separate circuits, one for machinery shutdown and one for an alarm.The Model RSB has the built-in advantage of cable break ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you