Industrial Hygiene Equipment For Health And Safety In Malaysia
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Highly Accurate, Stable, Quantitative, and Remotely Controllable Gas Monitoring System. Advanced Energy's Innova 1512 is based on the photoacoustic infrared spectroscopy and delivers superior sensitivity in a very compact form factor. Extremely versatile by design, the 1512 is capable of measuring almost any gas that absorbs infrared light. Leverages the unique strengths of the photoacoustic ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
CH4 and Non Methane Total Hydro Carbon (NMTHC) Monitoring and analysis of Methane and Non-Methane Hydrocarbons by flame ionisation detection (ppm level analysis). The CHROMATHC is an automated isothermal industrial gas chromatograph dedicated to the analysis of volatile organic compounds in air (indoor, outdoor, combustion), industrial hygiene, pure gas like N2/CO2/O2. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIBAR PSM 2010 is an electronic pressure switch for applications in the food and beverage industry as well as the pharmaceutical industry. Its hygienic construction comes with a fully welded front-flush diaphragm to meet the most stringent industrial requirements in terms of crevice-free installation. The pressure switch provides long-term stable absolute or gauge pressure measurement of ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch with extension tube for liquids especially in the food and life sciences industry. Liquiphant FTL51H is a point level switch with extension tube for use in hazardous areas with all international certificates. Especially useable in the food and life sciences industry with hygienic certificates (3-A, EHEDG, ASME BPE). FTL51H offers functional safety SIL2/SIL3. Reliable ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Transformation of sensor signals into stable and standardized output signals for all industries. Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from RTD sensors and thermocouples, but also resistance and voltage signals using HART® communication. It visualizes the signals on ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost-effective pressure transducer with fully welded design for the food & beverage industry. The Cerabar PMP23 is a price-attractive and compact absolute or gauge pressure transmitter. The piezo-resistive measuring cell with flush-mounted 316L diaphragm was designed for applications in the hygienic industry. PMP23 offers various EHEDG and 3-A certified hygienic process connections, materials ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Over the years, various types of Sound Level and Octave Band Meters have been used by Industrial Hygienists and Safety Professionals for monitoring workplace noise, most requiring significant operator training and producing varying degrees of effectiveness. At Larson Davis, we believe this is because until now, Sound Level Meters were designed primarily for use by Acoustical Engineers, not for ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
There exists a need to select an instrument that will do just what you need it to do. The 812 was designed with this in mind. For example, a consultant that works heavily in the industrial hygiene sector will greatly benefit from having the Model 812, a hand held data logging integrating sound level meter and a personal noise ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Safe monitoring of process temperatures in challenging applications e. g. in the Oil & Gas industry. The robust thermometer is designed for use in demanding and safety relevant applications e.g. in the Chemical, Oil & Gas and Energy industry. The thermometer fulfills the corresponding safety requirements due to various certificates and tests. The use of a transmitter leads to higher ...
-
Manufactured by Titanium World Technologybased in MALAYSIA
SMARTCOAT NANO PHOTOCATALYST SmartCoat Harnesses the energy from any light source to oxidise organic matters through photocatalyst effect in mere seconds. It is a liquid applied onto surfaces where it can self sanitise, self deodorise, eliminates VOCs, self clean and purify indoor air contaminants for a very long time. SmartCoat contains 2-3 nano meter tio2 (smallest in the world), water and ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The HVM200 is a small rugged vibration meter with built in Wi-Fi that can be used to measure hand-arm, whole body and general vibration. It includes the metrics and frequency weightings needed to measure human vibration. This 3 channel meter meets the requirements of ISO 8041:2005 and it is designed to measure per ISO 2631-1, 2 & 5 and ISO 5349 in support of the American Conference of ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Compact vibration point level switch for liquids especially in the food and life sciences industry. Liquiphant FTL50H is a point level switch for use in hazardous areas with all international certificates. Especially useable in the food and life sciences industry with hygienic certificates (3-A, EHEDG, ASME BPE). FTL50H offers functional safety SIL2/SIL3. Reliable measurement values, not affected ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for liquids in compact hygienic design for the food industry. Liquiphant FTL33 is a point level switch for liquids. The FTL33 is especially designed for food & beverage applications where hygienic requirements are requested. The Liquiphant is used for overfill prevention or pump dry-run protection. The IO-Link capability allows easy parameter ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Compact, fast and precise for the measurement of process temperatures in hygienic applications. With cost efficiency, optimal use of space, reliable operation, easy commissioning and hygienic design the TMR35 fulfills all the requirements in the Food & Beverage as well as in the Life Science industries. A variety of hygienic process connections leads to a high flexibility. ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The 720 was designed to do just what you need it to do. For example, a consultant that works heavily in the industrial hygiene sector will greatly benefit from having this hand-held data logging integrating sound level meter and, by removing the nose cone and revealing the 1 meter microphone extension cable, a personal noise dosimeter. The capability to add environmental noise monitoring to your ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTITEMP TRA-H61 is a RTD sensor assembly with reduced thermowell for hygienic applications in the food & beverage industry. The hygienic temperature sensor with stainless steel connection head and fast responding sensor tip is particularly suitable for temperature measurement of beverages, dairy products or pasty food or. It is therefore made of stainless steel (1.4404 / 316L) with an ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTITEMP TRA-H65 is a RTD sensor assembly with reduced thermowell and firmly welded clamp connection for applications in the food & beverage industry. The hygienic temperature sensor with stainless steel connection head and fast responding sensor tip is particularly suitable for temperature measurement of beverages, dairy products or pasty food. The sensor is therefore made of stainless ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
For the highest hygiene requirements in the food and life sciences industry. Levelflex FMP53 for continuous level measurement for hygienically sensitive applications in the food and life sciences industry. FMP53 meets the hygiene requirements according to ASME BPE and USP Class VI. The unique in situ validation without dismantling from the process is a cost saving advantage. FMP53 guided radar ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIBAR PM 5060 is a pressure transmitter for process pressure and level measurement in hygienic and non-hygienic applications with gases, liquids and steam. It can be used in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a piezoresistive or a strain gauge metallic diaphragm. Depending on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you