Insulation Materials Equipment For Health And Safety Available In Papua New Guinea
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
General Purpose Pressure Sensitive Adhesive is recommended for decorative laminate to particleboard and MDF (medium-density fiberboard) substrates, metals and plywood. This product has an adjustable tip offering the user a webbing type spray pattern that is water white and does not contain Methylene Chloride. Its unique formula prevents soak-in of the adhesive on porous surfaces. It offers the ...
-
Manufactured by Smoke Solutionbased in DENMARK
With our 2SP110 smoking cabin you will experience a high-performance quality product that will secure your environment, protection against passive smoking, dangerous gases and odour from cigarettes. Our smoking cabin are meticulously designed to ensure that smoke and odour stays within the cabin. The smoking cabin materials are selected and tested thoroughly to give the best performance, and with ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The forming chamber is a part of the plant where the glass wool fiber produced on fiberizer is collected. This machine consists of perforated horizontal flight conveyor (from which is sucked a big quantity of air). Two vertical longitudinal contrarotating belt conveyors form two side walls of the chamber. Two further belt conveyors form 2 walls of the chamber (anterior and posterior). These ...
-
Manufactured by IKO Industries Ltdbased in BELGIUM
IKO manufactures rolled roofing and accessories, building envelope, and waterproofing and insulation products for commercial and industrial markets in both North America and Europe. In North America, IKO specializes in the manufacture of commercial roofing systems, ranging from mechanically attached to heat-welded (APP and SBS), cold-applied membranes and built-up roofing (BUR). They also ...
-
Manufactured by Salherbased in SPAIN
WWTP for small populations. The low-load activated sludge treatment plant (extended aeration) with high-efficiency fixed culture CVC-OXIDEP-TC is usually used to treat the water of small towns and is certified according to EN 12566-3 ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The roll up machine is the unit that rolls up automatically the mattresses or the felt. The roll up machine can be equipped with a system of precompression which compresses the felt up to a required value before the phase of rolling up begins. The machine wraps automatically the roll from the outside with a plastic film or paper. So the roll is being sealed, preventing rollout. A special ...
-
Manufactured by Salherbased in SPAIN
The compact pretreatment plant (PPC) is a compact dewatering and degreasing plant for the filtration or screening of solids, the elimination of fine solids with a size between 0.25-3 mm, the elimination of sands and dense solids and the elimination of oils and grease. It can incorporate a helical screw screen (PPC-TAHEL AND PPC-TAHEL-D) or a rotary drum sieve (PPC-TARO AND ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The packaging unit is the last step of the production process. Gamma Meccanica S.p.A. proposes different packaging systems so to respond to the client’s needs. The packs are wrapped up with polyethylene and thermoshrinked when they come out from the stacker. During the packaging the packs, depending on the density, can be compressed, reducing its volume, so reducing the transportation ...
-
Manufactured by Salherbased in SPAIN
Removal of suspended solids (SS or MES). Salher brand, model CHC-FS. Manufactured in Glass Fiber Reinforced Polyester (GFRP) with orthophthalic resins in accordance with EN 12255-1 Standard. Suspended solids removal efficiency: 65-70%. Organic matter removal efficiency: 30-35% BOD5. Settling, anaerobic digestion and separation chambers. PVC inlet and outlet pipes. Cleaning through the access ...
-
Manufactured by Salherbased in SPAIN
Class II Oil/water separator, 1 separation chamber, standard. The hydrocarbon separators class II are standard separators designed by Salher and manufactured in GFRP (Glass Fiber Reinforced Polyester), sized in accordance with EN 858. They separate mineral oil and grease and hydrocarbon from water and guarantee an outlet oil concentration lower than 100 ...
-
Manufactured by Gamma Meccanica SpAbased in ITALY
The capacity of the line for the production of extruded polystyrene XPS boards can vary from 300 to 1500 kg/h, equivalent to 70000-300000 m³ / ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Engines, gearboxes and turbochargers are often used in an environment of heat-sensitive materials. At the same time, the temperature development in these areas is usually extreme. The goal of marine insulation at the highest level is therefore not only to minimize energy requirements, but also to reduce surface temperatures and radiant heat. This protects the individual components from damage and ...
-
Manufactured by Advance Thermal Corp.based in USA
SPACE-JAK is the latest addition to the industry-leading HEATAINER line that utilizes next-generation PTFE-coated fiberglass, providing better durability, heat-reflectivity and aesthetics for the best form, fit and function in the industry. SPACE-JAK’s silver-coating increases the cover’s performance and longevity. This unique coating enhances the insulating properties of the inner ...
-
Manufactured by Langfang Osking Business Co., Ltdbased in CHINA
OSKING Glass Wool Insulation Boards adopts high grade & high density acoustic absorption fiberglass wool as base material and the linings are efficient inflaming with fire retardant fabric or leather. Fine machined based on different types, demand and occasions. It has the advantages of fireproof, sound isolation, sound absorption, and beautiful decoration effect. it has been proved to have ...
-
Manufactured by Shijiazhuang Huatao Import and Export Trade Co.,Ltd.based in CHINA
Specification Polyester Material Antistatic monofilament material, carbon wire or bronze wire Model HT31505 HT14804,HT14804-1 Mainly used for MDF (Medium-density fibreboard ) board and fiberboard process industry, chemical fiber and drying for papers,spunbond nonwoven fabric production,ect Description: Antistatic synthetic mesh belt,can be named as polyester conductive conveyor belt,antistatic ...
-
Manufactured by Advance Thermal Corp.based in USA
Advance Thermal Corp. offers state of the art U.S.A. built insulation systems for exhaust manifolds for a large variety of diesel, gas, and dual fuel engines. Years of experience allow us to incorporate cutting-edge technology coupled with superior design and choice of materials capable of withstanding the toughest conditions for manifold insulation. An exceptional combination of tested materials ...
-
Manufactured by Bernoulli System ABbased in SWEDEN
The BSG product line was introduced in order to meet the tough corrosion challenges faced by products operating with seawater. With its design in GRP (glass fiber reinforced polyester) the BSG filter benefits material durability and large weight savings. In the BSG product line, capacities of up to 6400 m3/h can be supported among the eleven models, DN 100(4”) –DN700 (28”), ...
-
Manufactured by Makronbased in FINLAND
Makron Fibretec 2000 represents the highest level of technology in the recycled cellulose insulation manufacturing industry. The capacity of 2000 kg per hour can be produced with only one key ...
-
Manufactured by Sernak Building Materials & Insulationbased in TURKEY
MDF is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibers, often in a Defibrator, combining with wax and a resin binder, and forming panels by applying high temperature and pressure. Then, cutting into the standard size for furniture and door panels as it has a greater degree in smooth surface which easily to be molded. The body is medium ...
-
Manufactured by Langfang Osking Business Co., Ltdbased in CHINA
OSKING complete glass wool production lines employing latest-generation technology to manufacture boards, slice, rolled blankets and pipes for residential and industrial thermal and acoustic insulation needs, in compliance with the top international standards (EN, DIN, ASTM). At the system HOT END, the raw materials are dosed, mixed, melted, centrifuged to fiber, impregnated with a special binder ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you