Integrated Safety Equipment For Health And Safety Near Australasia
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The CQ range provides an innovative fully-concentric and balanced actuator design for quarter-turn valves. The design features a helical mechanism that transforms linear piston motion into quarter-turn valve stem rotation. CQ actuators provide a much higher torque output for a given footprint than scotch yoke designs typically utilised to operate many quarter-turn valve types. It is therefore ...
-
Manufactured by Camfil Air Pollution Control (APC)based in USA
The Farr Gold Series cartridge dust and fume extractor combines enhanced performance with ease of service while cleaning the work environment of irritating dust and ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Output 60 – 2,500 g/h of chlorine. CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from sodium chloride and electrical energy. A key advantage is its simple process management and excellent system safety through integral ventilation and ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for the maximum degree of safety. The point level switches for liquids of the Liquiphant family have convinced customers for three decades by now. The new Liquiphant FailSafe of Endress+Hauser sets standards in terms of safety and high availability. The point level switch is used in pump dry-run protection and overfill prevention, predominantly in the chemical, oil & gas as ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Coated point level switch for liquids for FailSafe overfill prevention. Liquiphant FTL85 is a coated point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device. With high corrosion-resistant coating made of enamel, ECTFE and various PFA materials. Reliable measurement values, not ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Compact and cost-saving for safe monitoring of process temperatures. Cost efficiency, optimal use of space, reliable operation, easy installation and commissioning indicate modern process measuring technology. The temperature switch completely fulfills these requirements. Designed for the safe measurement and monitoring of process temperatures it can be selected between one or two switch outputs ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for liquids for FailSafe overfill prevention. Liquiphant FTL81 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for liquids for FailSafe overfill prevention. Liquiphant FTL80 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Automatic lab press with various loads: Specac’s Atlas Series Power Press is available in the following options: 8 ton load configuration, 15 ton load configuration, 25 ton load configuration. These bench-top presses have power-assisted hydraulics for ease-of-use and, with a small footprint, ergonomic design and low noise characteristics, they are appropriate for a range of applications in ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Everything you need to produce thin films: The High Temperature Film-Maker Kit I provides everything required to produce thin films from sample materials at temperatures of up to 400°C. The High Temperature Film-Maker Accessory has a set of heated platens built in and can turn samples into thin films at temperatures of up to 400°C. The High Temperature Film-Maker Accessory has a load ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Up to 40 tons automatic lab press. The Atlas Series Autotouch Automatic Hydraulic Press, is available in 8 Ton, 15 Ton, 25 Ton and 40 Ton load configurations. It is particularly popular with users conducting analysis through Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Fluorescence (XRF), therefore known as both an FTIR or XRF press. It is ideal for preparing FTIR KBr pellets or as ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This bag is a simple and cost-effective system for collecting measuring gas in case it cannot be returned directly into the circuit breaker. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the SF6 from up to 25 measurements. The gas can be removed by means of any service cart. When ...
-
Manufactured by Rapid Granulator ABbased in SWEDEN
The Rapid RG Series is specifically designed for beside-the-press recycling of hard and brittle materials. The ultra-slow rotor speed and screenless operation provide low noise level and very low dust level even with the most filled and brittle ...
-
Manufactured by Scag Power Equipmentbased in USA
Tough jobs demand tough products and Scag Giant-Vac Yard Vacuums are ready to meet the challenge. Utilizing all-welded steel housing and impeller construction along with commercial grade quality throughout helps us maintain our time-proven reputation for rugged, durable and dependable products that are built to last and perform. Debris is sucked up quickly through the 26" intake and is ...
-
Manufactured by Setnagbased in FRANCE
Measurement of oxygen in combustion gases (specially dedicated to natural gas ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The probe type ASP 320 is based on the standard Ankersmid sample probe. Due to its modular and innovative design the Ankersmid heated sample probe cover also meet the special requirements of above mentioned ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe. with the filter element of 150mm length this probe is suitable for most applications up to 1g dust/m3; with the blow-back ...
-
Manufactured by Bakerbased in USA
The need to protect personnel from potentially harmful vapors and airborne particulate matter is a fact of life for every modern laboratory. Laboratory Fume hoods are ventilated workstations designed to contain hazardous fumes and exhaust them away from the researcher. Traditional fume hood designs have relied upon high airflow volumes and face velocities to create a “vacuum” effect ...
-
Manufactured by Branach Manufacturing Pty Ltdbased in AUSTRALIA
The Branach EuroMaster Premium Step Platform not only conforms to the EN 131-7 standard, it exceeds it. With features including raised legs, step covers and a rear safety rail, this platform is designed to deliver exceptional performance, while keeping your workers ...
-
Manufactured by Branach Manufacturing Pty Ltdbased in AUSTRALIA
As the name suggests, the Branach EuroMaster All Terrain Step Platform is built for any terrain, indoors or out. Its individual adjustable legs offer the convenience and stability that users and safety experts have been asking for and it meets the EN 131-7 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you