Laboratory Safety Equipment For Health And Safety Available In New Zealand
-
PremiumManufactured by Maschinenfabrik Gustav Eirich GmbH & Co KGbased in GERMANY
Groundbreaking process technology meets hygienic design. One machine - many options. Don't make your lab unnecessarily full and expensive with a variety of lab machines. The C5 is the universal one-pot machine that combines an entire development lab in one. Due to the unique mixing principle, all process operations such as mixing, deagglomerating, dispersing, granulating, coating, kneading, and ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Principles of Operation. The oil mist media is stored in the OMG in a heated pressure tank, the temperature of which can be controlled to ensure a consistent and appropriate oil viscosity. Temperature control of the reservoir is via it's own PID microprocessor controller, allowing independent control from ambient to 70°C. The heat exchanger within the OMG is controlled by a second ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
VITRIOX® ELECTRIC for 1, 2, 4 or 6 samples, incl. sample holder and protective housing. The VITRIOX® ELECTRIC is a fully automatic fusion machine with cold to cold operation for 1, 2, 4 or 6 samples; 1 sample at a time. It has been designed to achieve the best possible results in day-to-day XRF laboratory routine. Safety: casting dish monitoring, flux resistant FLUXinert® ceramics and ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 201 is a portable oxygen analyzer used primarily for the measurement of O2 concentration in gas flows, chambers, or gas flushed hoods (such as glove boxes). The analyzer comes with both an “open faced” fitting and a T-fitting, allowing it to be used for analyzing gas flows, or set in chambers where oxygen levels need to be monitored. The sensor operation is not ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Eagle White High Density Polyethylene (HDPE) 1/2 Gallon Laboratory Safety Cans reduce the danger of explosions resulting from the ignition of vapors of flammable liquids. Constructed of HDPE, these cans are ideal for use in scientific, industrial, and hospital laboratories. Lab cans are impact resistant, non-corroding, and will not rust. They are impervious to many liquid chemicals, solvents, and ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Precellys Evolution is the most advanced tissue homogenizer combining high efficiency and versatility for all sample preparation ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms. If you require 0-1000ppm analysis, please see our ZR1000. For those applications where a source of sample flow is not available, the 905P can be equipped with an optional sample pump which can ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Eagle Red High Density Polyethylene (HDPE) 1 Gallon Laboratory Safety Cans reduce the danger of explosions resulting from the ignition of vapors of flammable liquids. Constructed of HDPE, these cans are ideal for use in scientific, industrial, and hospital laboratories. Lab cans are impact resistant, non-corroding, and will not rust. They are impervious to many liquid chemicals, solvents, and ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Eagle White High Density Polyethylene (HDPE) 1 Gallon Laboratory Safety Cans reduce the danger of explosions resulting from the ignition of vapors of flammable liquids. Constructed of HDPE, these cans are ideal for use in scientific, industrial, and hospital laboratories. Lab cans are impact resistant, non-corroding, and will not rust. They are impervious to many liquid chemicals, solvents, and ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
O2 and CO2 Analyzer for research processes, gas blending, biotech, and other systems. The Model 902P O2 CO2 analyzer measures 0 to 100% O2 concentrations, and 0-1% to 0-100% CO2 vol/vol full scale, in a variety of process, research, and biotech applications. Options include internal sample pump, battery operation, analog outputs, and complete data collection option (including analysis software ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this ring main mounted indoor emergency safety shower meets the requirements of the European Standard EN 15154 for plumbed in laboratory showers. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Shower rose ...
-
Manufactured by Arya Water Technologiesbased in INDIA
Electrodeionization is a continuous and chemical-free process that removes ionized and ionizable species from feed water. An EDI plant serves as an alternative to conventional mixed-bed polisher, as it eliminates regeneration downtime, as well as the need to handle and store hazardous chemicals like acid and lye. It is used to obtain low levels of conductivity and silica in the treated water, and ...
-
Manufactured by Ankom Technologybased in USA
The ANKOM RF Gas Production System provides an easy to use method for monitoring and measuring gas ...
-
Manufactured by NuAire, Inc.based in USA
The LabGard ES 813 Class I Biological Safety Cabinet can be used as a balance enclosure or ductless fume hood for personnel protection for the safe handling of low risk powders, liquids, and animal ...
-
Manufactured by St. Croix Sensory, Inc.based in USA
St. Croix Sensory is proud to offer the olfasense line of olfactometers to North America. The olfasense TO series olfactometers are used by over 325 laboratories worldwide. The TO-8 evolution is the latest generation of olfactometer from olfasense. The TO-Evolution can operate in all commonly used standards of olfactometry, including Yes/No (EN13725), Dual Forced-Choice (EN13725) and ...
-
Manufactured by Zhejiang Tailin Bioengineering Co., Ltd.based in CHINA
FHP3 Dry Fogger sprays the H2O2 aerosol by high speed airflow, and disperses it into the enclosed space according to Brownian ...
-
Manufactured by Telstar - part of the Azbil Groupbased in USA
The Telstar Bio II Advance Plus series is a new generation of biological safety cabinets class II, providing a compact design for easy installation within the laboratory, without losing valuable working space. It has also been designed to the highest standards of safety, ergonomics, energy efficiency, reliability and ease of use in its class. The Bio II Advance Plus series is backed by ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this ceiling mounted indoor emergency safety shower meets the requirements of the European Standard EN 15154 for plumbed in laboratory showers. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Shower rose designed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you