lead-based paint Articles

  • LEAD-BASED PAINT TESTING

    Abatement Project Management  ACC controls all factors of lead-based colour abatement tasks on our customer's part. The ACC venture manger screens the contractor’s actions to make sure conformity with OSHA rules. Once abatement is accomplished, the ACC venture administrator performs a visible examination and, if the place is going to be re-occupied with children, approval ...

  • Paint

    Problem: A paint manufacturer, that produces both oil and water based paints, needed help to solve their liquid sludge problem. At that time the wastewater was batch treated and consisted of a chemical addition process followed by settling. This was to be changed in the near future to a continuous type treatment system. The settled sludge consistency varied form 5% to 10%. The ...


    By HydroCal Inc.

  • LegalLookout: EPA Proposes Lead-Based Paint Removal Requirements

    On Jan 10, 2006, EPA proposed extensive requirements to minimize the introduction of lead hazards resulting from the disturbance of lead-based paint during renovation, repair and painting activities in most housing built before 1978.[1] The proposal supports the attainment of the federal government’s goal of eliminating childhood lead poisoning by 2010. Importantly for Pollution Engineering ...


    By Bergeson & Campbell, P.C.

  • Asbestos, lead-based paint, hazardous materials case study

    Service(s) performed: Construction management for hazardous materials abatement, building demolition and site clearing for 49 residential buildings Summary: Our environmental experts performed construction management for hazardous materials abatement, building demolition and site clearing project for a 49 building residential development scheduled for ...


    By EFI Global, Inc.

  • Protecting American children from lead-based paint hazards

    EPA is issuing a final rule under the authority of section 402(c)(3) of the Toxic Substances Control Act (TSCA) to address leadbased paint hazards created by renovation, repair, and painting activities that disturb lead-based paint in target housing and childoccupied facilities. ‘‘Target housing’’ is defined in TSCA section 401 as any housing constructed before 1978, except housing for the ...

  • Legal Lookout: EPA Proposes Lead-Based Paint Removal Requirements

    Untitled Document On Jan 10, 2006, EPA proposed extensive requirements to minimize the introduction of lead hazards resulting from the disturbance of lead-based paint during ...


    By Bergeson & Campbell, P.C.

  • Occupational exposures to lead-based paint in structural steel demolition and residential renovation work

    Occupational exposures to lead are characterised for a number of different lead-based paint abatement techniques in two work settings: residential renovation and structural steel demolition. Exposure levels reported during heavy structural steel demolition work involving acetylene torch cutting, welding, and abrasive blasting can be more than 100 times greater than the permissible exposure limit ...


    By Inderscience Publishers

  • Lead in Paint and Soil in Karnataka and Gujarat, India

    Blood lead surveys in several areas of India have found very high percentages of children with elevated blood lead levels. Fifty-three percent of children under 12 years of age in a sevencity screening had blood lead levels equal to or greater than 10 μg/dL, the level currently considered elevated by the U.S.  Centers for Disease Control and Prevention (CDC). A number of these surveys ...

  • S. Dyrup & Co. A leading paint manufacturer

    One of Europe’s leading paint manufacturers inaugurates new facility: S. Dyrup & Co. select magnetically coupled ROTAN pumps. The summer of 1998 – S. Dyrup & Co., one of Europe’s leading producers of paint and lacquers, installs an advanced plant for manufacturing solvent based paint and wood preservative. ...


    By DESMI A/S

  • What Home Owners Need to Know About Lead Paint

    The U.S. Environmental Protection Agency enacted a new rule for professional contractors in April 2010 to help keep small children safer from the dangers of lead dust exposure. If you live in a home built before 1978 and you’re contemplating any work that will disturb more than six square feet of painted surfaces inside the home or 20 square feet on the exterior of the home – for ...


    By EnviroVantage

  • Analysis of Lead in Toys

    Important and always current is the analysis of lead in toys for children. Details about the effective sample comminution with FRITSCH Mills. Lead is a toxic heavy metal. Approx. 90 % of the incorporated lead is deposited in the bones and the teeth. Because lead is released very slowly, it will be accumulated over the time in the body. This is dangerous especially for children.  The European ...


    By Fritsch Milling and Sizing

  • ROTAN ED for the Painting Industry

    Guangzhou Strong Chemical Co., Ltd is one of the leading Chinese producers of automotive refinish coating material. The company specializes in automotive refinish and ancillary materials. Annual production capacity of automotive refinish and ancillary material is 13,000 metric tons. Guangzhou Strong Chemical Co., Ltd. has used the ROTAN ED pumps successfully since March 2014 and some of the ...


    By DESMI A/S

  • Case study - Paint spray

    Problem A major automotive component supplier needed to control the emissions from its paint spray process. The plant emissions had characteristics common to many paint spray plants: high air flow, low volatile organic compound (VOC) concentration and particulate. The company needed an emission control solution that had low operating costs and that could also fit in their limited space. ...

  • Case study - Paint mixing

    Overview A company involved in the automotive aftermarket had a paint batch mixing and filling operation that used primers and fillers. They were faced with installing air pollution control equipment to handle the volatile organic compounds (VOCs) emitted by the solvents used in their processes. An independent consultant had determined that total exhaust volume from the facility was ...

  • CPSC lead in products testing

    Recent changes to the Consumer Product Safety Commission’s (CPSC) program on allowable levels of lead in products have prompted new rounds of testing. As a Manufacturer (or if you are anywhere in the Supply Chain for any product sold in the United States), you are responsible for monitoring and reporting the lead content in your product. There are threshold values of allowable lead in products as ...

  • Case study - Paint booth over spray

    OVERVIEW A major automotive component supplier needed to control the emissions from its paint spray process. The plant emissions had characteristics common to many paint spray plants: high air flow, low volatile organic compound (VOC) concentration and particulate. The company needed an emission control solution that had low operating costs and that could also fit in their limited ...

  • Paint & Coatings Manufacturer Selects CPI RTO

    Catalytic Products International (CPI) recently completed the installation of a new TRITON Series Regenerative Thermal Oxidizer (RTO) to a Midwest USA location of a global paints and coatings manufacturer for the abatement of Volatile Organic Compounds (VOCs). ...

  • Painting an ever-greener picture in car production

    The announcement earlier this year that BMW Group is investing a further £100 million to increase production at its Oxford plant is good news for those buyers who have been waiting around three months to get their hands on the steering wheel of the legendary new MINI. In the paint shop, this poses a special challenge – how do you reconcile the demands of more throughput, less maintenance downtime ...

  • Overview of Using Lead Through the History

    Various sources assumed the share of guilt in the fall of the Roman Empire due to the use of the lead pipe, Devonshire colic in the 18th century, poisoning from the addition of lead acetate to wine and pediatric lead poisoning. Not only production but also the use of pottery for centuries caused poisoning among the population. When a piece of pottery covered with lead glaze is not heated enough, ...


    By Lumex Instruments Group

  • New approaches for monitoring the marine environment: the case of antifouling paints

    Protection of ships hulls against biofouling has been a problem since man began sailing the seas. The most common protections are specially produced antifouling paints. These paints could be broadly classified in three main groups, or generations, depending on the technology applied: first generation copper-based, second generation organotin-based, and the new, third generation, organotin-free ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you