Only show results available in Virginia? Ok

Medical Waste Applications

  • Handling hospital waste and laundry

    Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.




  • Waste handling in flight catering kitchens

    Large catering kitchens at airports are operational more or less round the clock. They have to deal with enormous amounts of waste from incoming aircraft, food preparation kitchens and staff canteens. Compared with traditional manual refuse collection methods, an automated kitchen waste system is safer, more efficient, more hygienic – and cheaper in the long run.

    By Envac AB based in Stockholm, SWEDEN.

  • Premium

    Air Pollution for General Industrial Applications

    With 30 years` experience, and more 300 operational, industrial air pollution plants, ERG has an extensive reference list to draw on. So even if your application does not fit neatly into one of the categories described in our portfolio of experience, we are likely to have relevant experience to help us solve your air pollution problem.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Measurement solution for hospital workplace exposure monitoring

    In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for measuring total VOC via FTIR

    Current Total VOC Measurements

    The most common, and current standard, method for measuring Total Volatile Organic Compounds (VOC) is the use of a Flamed Ionisation Detector (FID). This gives a representative value of the total carbon content of a gas stream, as the FID cannot tell which specific organic compounds are present.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Hospital waste shredding

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Solutions providing corrosion protection

    B-Team Corrosion Protection offers complete solutions providing corrosion protection for food processing plants. The composition of jointless lining systems comply with most food laws so that they are highly appropriate for use in the food processing industry. Typical applications in the food industry include:: Storage Tanks for starch production Pots and containers Sterilizers Processing zones Floors Water treatment systems Fermenters for the brewing industry

    By B-Team Corrosion Protection based in Bucharest, ROMANIA.

  • Water systems for industrial sector

    The Magnation Industrial Next Generation and Big Blue Pump & Irrigation systems, and Rainbolt Well systems are designed to reduce the impact of scaling,and improve water flow and energy efficiency in virtually any industrial application. Guaranteed less salts, less energy use, less chemical use, and reduced maintenance while extending the longevity of pipes. Our non-chemical system is available in a complete range of sizes, from the 2” Diameter System to large-scale applications including well drilling, manufacturing and processing plants, car washes, golf courses, construction, real-estate developments and power plants, to name a few.

    By Magnation Water Technologies - Magnation Corporation based in Oakland, CALIFORNIA (USA).

  • Premium

    Waste recovery for petrochemical wastes

    Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Shredding machines for various applications

    Every material makes different demands on a shredding machine. A wide range of products with innovative and reliable technology creates the crucial pre-conditions for your resources to be turned into high quality products.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Gas monitoring instruments and systems for anesthetic gases

    The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, isoflurane, enflurane, halothane, desflurane, and methoxyflurane. Short-term exposure to these gases may lead to several symptoms, such as dizziness, headaches, fatigue, nausea. Long-term exposure to some of the anesthetic agents may result in sterility, birth defects, cancer, and liver and kidney disease.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Medical and Bio-hazard Waste Treatment Technology with zero emissions

    The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated waste can be used as fuel in a WTE (waste-to-energy) facility. (CV 36.4 MJ/kg)

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Premium

    Quarantined and International Waste

    Medical (Healthcare) Waste • Bio-hazardous waste • Pathological Waste • Cultures and stocks of infectious agents and associated biological agents • Liquid human and animal waste, blood and blood products and body fluids • Contaminated waste from animals • Sharps • Anatomical • Quarantined waste (airport and border protection) • General waste (i.e. kitchen waste, etc.)

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Premium

    Positive displacement pumps for biopharmaceutical industry

    Pharmaceutical and biotechnology processes demand sterility and precision in order to ensure the integrity and quality of the end product. Fluid isolation, and precise metering are essential.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    EH&S Regulatory Compliance Management for Electronics And Medical Devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) to US legislation on conflict minerals. The depth and amount of information that suppliers must access, evaluate, compile, integrate and disclose is growing exponentially.

    By 3E Company based in Carlsbad, CALIFORNIA (USA).

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you