Mercury in the Environment Applications available in Libya
-
Premium
Analytical Instruments for Water Analysis Applications
Efficient water analysis with leading technologies. Our solutions for higher water quality and purity: Discover applications and technologies for analyzing drinking, process as well as surface water, including salt water. Learn about analytical solutions for parameters such as TOC and TNb as well as analysis methods for mercury, trace and toxic elements. Benefit from culture-independent PCR methods for microbiological testing of condensates from evaporative cooling systems, for example, which allow results to be ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Mercury monitoring for mercury flux measurement
The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Emissions Monitoring for Cement Plants
Opsis provides state-of-the-art monitoring equipment, fully meeting the high standards of monitoring performance and reliability that the cement industry requires. The Opsis in situ systems are designed to withstand environments with high particulate levels and high ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Mercury monitoring for isotopic abundance by the ICP-MS
Studies of real-world ecosystems are very complex. Mercury species inter-conversion as well as mercury deposition and evasion are constantly occurring. One technique to help sort out the processes is to trace reactions using natural Hg isotopes. Either by enriching a system with a particular isotope or determination of isotopic ratios as a technique of source identification, isotopes are a powerful tool for investigation. The Tekran 2600 Total Mercury and Tekran 2700 Methyl Mercury systems are designed to couple ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Determination of total mercury content in blood by cvaas
INTRODUCTION Blood is one of the most complex substances for determination of the Hg content. At the same time, blood is the most important diagnostic medium used for monitoring the effect of Hg vapor on the human organism. In almost all the countries, personnel of mercury-involving production facilities are regularly examined for the Hg content in blood, which should not exceed 20–50 µg/l, whereas in the case of a person unexposed to mercury vapor the blood normally contains 1–3 µg/l of ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Continuous emissions monitoring solutions for mercury monitoring
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Mercury monitoring for measuring mercury speciation in air
Tekran offers the only completely integrated, automated system for measuring mercury speciation in air. The Tekran 2537, when coupled to the Model 1130 and Model 1135 provides a continuous record of gaseous elemental mercury, gaseous oxidized mercury and particle-bound mercury. Over the past 12 years, the Tekran 2537-1130-1135 system has been the most significant tool used to advance the understanding of the fate and transport of atmospheric mercury. See the Expert’s Corner for details about international ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Determination of mercury in mercury-containing wastes
INTRODUCTION Mercury is widely used in chemical industry, electronic s, electric engineering, instrument making, medicine, pesticide and explosives production, etc. A number of techniques and equipment are developed for reclaiming mercury-containing waste, such as soil, sludge, stillage botto ms, slime sediments, fluorescent lamps, mercury-containing ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Mercury determination in natural, surface, sea, drinking, bottled, mineral, and waste water by cvaas
Introduction Mercury determination in natural, drinking, and waste waters is one of the most popular analyses used for environment pollution and sanitary control. Background concentrations of mercury in natural water are within several ng/l. Maximum national permissible levels for mercury in water lie in the range of 0.16–6 µg/l. For example, the following limits for mercury in drinking water are set, µg/l: 0.5 – Japan, Russia; 1 – Argentina, Australia, Brazil, China, EC; 2 ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Mercury monitoring for on-site remediation
Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Direct AA Mercury determination in cosmetics
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of the chemical oxygen demand (COD) in water
Introduction Chemical Oxygen Demand (COD) is one of the most common integral indicators of anthropogenic pollution of water bodies. COD is widely used in the analysis of natural water, to control wastewater treatment from organic various substances. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Direct atomic absorption mercury determination in oil and oil products
Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air pollution, emission and process monitoring systems for natural gas
Natural gas often contains mercury at concentrations that vary from below 1 to above 10000 µg/m³. Mercury is both toxic and potentially damaging: it can corrode or embrittle common gas plant components. Gas processors require safe, reliable and effective mercury removal process solutions in order to achieve requisite sales gas quality specifications and protect cryogenic equipment. Our monitoring solutions are used to detect and precisely measure mercury levels in natural gas at various locations within ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Direct mercury determination in coal
Introduction Mercury is one of the most toxic trace contaminant naturally occurring in the coals. During the coal combustion process at the coal-fired power plants mercury is released into the environment. To manage effectively the stack gas cleaning process, it is necessary to know the mercury content in the coal, and also in stack gas, liquid and solid ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of the total mercury in a filtrate of wash-off samples from contaminated surfaces
INTRODUCTION Quantitative determination of the total mercury content in filtrates of wash-off samples from the surfaces of walls, floors, equipment, and other facilities of m anufacturing areas is an effective method for the occupational safety ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of mercury in soil, bottom sediments, and geological materials
Introduction Analysis of soils and bottom sediments for mercury content is one of the most common analyses in the monitoring of environmental pollution. Background mercury concentrations in these objects are 10–100 μg/kg and in the polluted areas they exceed 10,000 ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of the mercury concentration in naphtha
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Mercury monitoring for measuring mercury content in hair
Measurement of mercury content in hair is a convenient technique to estimate dietary exposure without having to handle tissues or bodily fluids. As the mercury present in hair is comprised of different mercury species, full speciation of the compounds is needed for complete understanding. Environment Canada published a technique where treating a basic digestion with Cd2+ in the presence of cysteine allowed analysis of inorganic mercury and total mercury using a Tekran 2600 System. Methyl mercury was then ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you