Mercury Source (Mercury In The Environment) Equipment Available In Mississippi
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Ensuring worker safety from toxic levels of air mercury requires accurate and precise hand-held mercury monitors. The Tekran® JITRbug Instrument is designed as a rapid performance assessment tool for hand-held mercury industrial hygiene monitors. The system uses a built-in saturated mercury source to produce ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Inhalation of vapor is the primary route of elemental mercury toxicity in the workplace environment. The Tekran 2537Xi-IH Industrial Hygiene Monitor provides continual analysis of Hg levels in workplace air in a simple to deploy turn-key unit. This system can be customized according to customer needs including: number of monitoring ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3310 Elemental Mercury Calibrator allows high level mercury monitoring systems to be accurately calibrated using elemental mercury. It integrates seamlessly with the Tekran Series 3300 speciating CEM, however it can also be used as a stand-alone mercury calibration system. The calibration source ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3425 Elemental & Oxidized Mercury Calibrator provides NIST traceable calibration gas for system calibration. The 3425 is an added, programmable calibration gas source that complements the standard calibration gas source already installed inside the 3400 HgCEMS, necessary to comply with USEPA and other government ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration ...
-
based in USA
This media is based on organoclay technology like CrubeSorb but has been heavily modified to enhance mercury and arsenic adsorption through both physical removal and chemical ...
-
Manufactured by Ellab A/Sbased in DENMARK
to read, offers an temperature accuracy of +/- 0.1°C and an pressure accuracy of 0.15% full scale (20…120 °C), and does not constitute a potential source of mercury contamination. ...
-
Manufactured by Euromex Microscopen bvbased in NETHERLANDS
State-of-the-art microscopes for advanced Life Science fluorescence applications. The outstanding optical performance of the Delphi-X Observer™ makes it ideal for Life Science fluorescence applications where a high performance optical system is required. The larger 25 mm fields of view of the Super wide field eyepieces and the high numerical aperture of the Plan Fluarex 60 mm parafocal EIS ...
-
Manufactured by Euromex Microscopen bvbased in NETHERLANDS
The inverted Oxion Inverso biological microscopes of Euromex are available for bright field, phase contrast and fluorescence applications. Specific objectives compensate the 1.2 mm thick bottoms of the petri dishes or culture dishes. The Oxion Inverso inverted microscopes (Life Science) are useful for observation of living organisms and tissues cultures in cell culture dishes and ...
-
Manufactured by Teledyne APIbased in USA
The Model 470 is a state-of-the-art Dissolved Ozone Sensor designed for semiconductor Wet Bench tools and many other industrial processes. It provides continuous measurement of dissolved ozone in deionized water or sulfuric baths with concentrations above 150 mg/L. The Model 470 is “clean-ready” for high purity semiconductor processes, and is designed to be simply spliced in-line in ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APOA-370 continuously monitors atmospheric ozone concentrations using a cross flow modulated ultraviolet absorption method. The APOA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of continuously monitoring and instantaneously analyzing gases ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome J405 portable mercury vapor monitor is redefining the portable mercury vapor analyzer market. Significant performance enhancements and modern communications capabilities have been combined to create a new option for mercury spill detection and clean-up analysis. The J405 utilizes the industry-proven, inherently stable and reliable ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome J505 Mercury Vapor Analyzer is a portable fluorescence spectroscopy analyzer, which allows the detection cell to be simpler, smaller, lighter weight and more durable than competing spectroscopy instruments. The highly efficient optical cell requires less flow to purge the system, allowing the J505 to run at a lower flow rate ...
-
Manufactured by Nippon Instruments North Americabased in USA
The NIC EMP-2 is designed for measuring gaseous mercury in work environments. It is compact, light-weight, battery-powered and can be carried virtually anywhere. The EMP-2 has sensitivity limits down to 0.1 ug/m3. Measured data is automatically acquired and recorded into a built in data-logger and can be retrieved via PC for data ...
-
based in GERMANY
The Jerome J505 Mercury Vapor Analyzer is a portable fluorescence spectroscopy analyzer, which allows the detection cell to be simpler, smaller, lighter weight and more durable than competing spectroscopy instruments. The highly efficient optical cell requires less flow to purge the system, allowing the J505 to run at a lower flow rate ...
-
based in GERMANY
The Jerome J405 portable mercury vapor monitor is redefining the portable mercury vapor analyzer market. Significant performance enhancements and modern communications capabilities have been combined to create a new option for mercury spill detection and clean-up analysis. The J405 utilizes the industry-proven, inherently stable and reliable ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome 451 monitoring system from Arizona Instrument is the tool you need to solve your mercury monitoring problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location that requires monitoring. Multiple units can also be linked to form a perimeter monitoring system. Data ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
Mercury Vapour Generators are used to produce a known concentration of mercury for a range of applications including: Calibration of Mercury Monitors and Mercury Analysers. System integrity test. Sampling system testing for losses/drift. Spike testing Mercury Monitors and Mercury Analyser ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you