Mercury Monitoring Equipment For Health And Safety Available In New Zealand
-
ShowcaseManufactured by Lumex Instrumentsbased in CANADA
The mercury analyzer RA-915M is a unique all-purpose high sensitivity analytical instrument for measuring mercury, especially for the real time detection of mercury vapor in air, mercury detection in water, natural and stack gases, oil and condensate, solid and sediments, foodstuff and so ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Light-915 Mercury Analyzeris a compact instrument designed to address the problems of mercury pollution in a workplace environment and sanitary control. As with all the other Lumex mercury analyzers, the principle of measurement of Light-915 is based on atomic absorption spectrometry with Zeeman background correction, which eliminates the effect of interfering impurities. It is the only ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
The OLM30B is a dual train, fully functional sampling system, complete with Mass Flow Controllers, vacuum gauges, a WatLow controller with thermocouple input and probe power ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Mercury determination in the trace and ultratrace range. Efficient - automated and time-controlled flow injection technology. Safe - bubble sensor, optimized drying membrane and cascade enrichment. Effective - low reagent consumption, short measurement ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. Typically, the sampler would be worn for the the full 8-hour workday. ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended operation to determine all three mercury species ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915M mercury analyzer with RP-92 attachment is used for determination of mercury concentration in liquid samples (water, blood, urine). RP-92 attachment is intended to transfer bound Hg from ion to atomic form using “cold vapor” ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran® 2700 Methyl Mercury Analysis System offers an automated solution for complex and time consuming manual techniques. The 2700 is a fully-integrated gas chromatography cold-vapor atomic fluorescence spectrophotometer (GC-CVAFS). The 2700 can analyze distilled waters, extracted or distilled tissues and solids, and allows direct analysis of suitable water samples (MDL=0.002 ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Ensuring worker safety from toxic levels of air mercury requires accurate and precise hand-held mercury monitors. The Tekran® JITRbug Instrument is designed as a rapid performance assessment tool for hand-held mercury industrial hygiene monitors. The system uses a built-in saturated mercury source to produce mercury test atmospheres of known concentrations. This is used to audit external ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Atomic absorption spectrometry at 254 nm with Zeeman correction for background absorption for interference-free ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive measurements of background Hg concentrations and is compliant with the European standard EN 15852 for ambient air ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Cold Vapor Atomic Fluorescence (CVAF) is a powerful technique based on detecting fluorescence light emitted by the sample. Below the principle of the technique is explained in a ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you