Only show results in Virginia? Ok

Mold Remediation services for Health and Safety

  • Mold Clean Up & Mold Remediation Services

    Mold remediation encompasses identifying and addressing mold issues in a structure. Mold remediation prevents the spread of mold by isolating damaged areas, removing affected material and eliminating moisture sources – the cause of the mold – in order to reestablish a healthy environment.

  • Mold Service

    Toxic molds have been causing serious health conditions in humans for hundreds of years.  These dangerous types of mold can exist in damp environments in our home or workplace without us ever knowing it.  In the past ten years, there have been many reports of toxic molds causing serious and even fatal consequences for infants and ...

    By Anson Environmental Ltd. based in Huntington, NEW YORK (USA).

  • Mold Remediation Service

    Mold is found everywhere inside and outside, and can grow on almost anything where moisture is present. As mold reproduces it creates spores, which are carried through the air. Spores can land on moist surfaces and begin to grow. Mold is commonly found indoors at minimal levels that do not affect healthy individuals.

    By Water Damage Support based in Tarzana, CALIFORNIA (USA).

  • Residential & Commercial Service

    Contractors, engineers and business owners can count with OSTC for safe, effective, turnkey solutions for mold remediation. We work hard not only to achieve customer satisfaction, but to go above and beyond to exceed client expectations. Your priorities become our priorities because your success is our goal.

    By Oxygen Sanitizing Technology (OST) based in Carolina, PUERTO RICO.

  • Asbestos Removal and Mold Removal

    US Waste specializes in asbestos removal and mold removal for commercial properties. US Waste will work with property owners to find common-sense, cost-effective solutions to their asbestos problems. We offer solutions for asbestos ceiling and wall textures, exterior siding, interior wall plasters, flooring materials, duct and pipe insulation, ...

    By US Waste Industry based in Walterboro, SOUTH CAROLINA (USA).

  • Microbial Remediation

    ACM Corp. employs microbial remediation supervisors and personnel and has the ability to perform the restoration of mold contaminated structures and their content. ACM Corp. will restore the affected building and contents to a (near) pre-loss condition and re-establish a healthful environment to it's occupants.

    By ACM Consulting Corp. based in Union, NEW JERSEY (USA).

  • Residential

    ENPRO’s staff includes seasoned project managers, licensed site professionals, and environmental engineers who have considerable experience working within the framework of federal and state regulations, state funded programs, and insurance policies. We work closely with local fire departments and state officials to mitigate sudden releases ...

    By ENPRO Services, Inc. based in Newburyport, MASSACHUSETTS (USA).

  • Mold Surveys

    Elevated mold concentrations within occupied spaces can pose potential health risks and significant challenges to property transactions.

    By American Geosciences, Inc. (AGI) based in Murrysville, PENNSYLVANIA (USA).

  • Mold Remediation Services

    Concerns about mold and indoor air quality have grown dramatically in recent years, with a significant increase in mold-related insurance claims.

    By LVI Services, Inc. based in New York, NEW YORK (USA).

  • Mold Assessment

    Goldman Environmental Consultants understands the consequences of mold contamination and offers effective remediation strategies. GEC custom tailors Mold Contingency Plans as well as remediation projects. A GEC Mold Contingency Plan is a customized, written plan outlining the steps to prevent moisture and other conditions favorable to mold-growth. ...

    By Goldman Environmental Consultants, Inc. based in Braintree, MASSACHUSETTS (USA). from Mold Assessment Service line

  • Mold Testing and Mold Removal

    GLE’s mold inspection services help clients address mold contamination concerns quickly, by offering the blend of expertise needed to develop responsible, cost-effective mold removal solutions that make sense for each client. With a highly qualified team of mold investigation experts and more than a decade of experience solving indoor air ...

    By GLE Associates based in Tampa, FLORIDA (USA). from Mold Testing and Mold Removal Service line

  • Audio Services

    Quality, immersion and depth:  These are the tenets of perfecting an audio experience.  In a world where expectations are high, we make sure they are fulfilled.  Good audio may go unnoticed, bad audio is negative focal point, but great audio can transcend emotion and create an enhanced experience.  Whether it be designing the ...

    By Robert Anderson Group, Inc. based in Lansing, MICHIGAN (USA).

  • Gas Assist Molding Services

    Injecting gas during the molding process pushes resin to the outer edge of the cavity, providing uniformity while offsetting the effects of resin shrinkage. This creates greater consistency, minimizes warp, reduces the part’s weight, and increases design freedom.

    By Cascade Engineering based in Grand Rapids, MICHIGAN (USA).

  • Emergeny Services & Mold Remediation

    Facility emergencies create the need for immediate response and loss mitigation. FlagshipPDG responds to emergencies and reaches the affected site to begin working through the vital decision making process with our clients. An effective mitigation process implemented with informed decisions by trained FlagshipPDG professionals will minimize the ...

    By FlagshipPDG based in Pittsburgh, PENNSYLVANIA (USA).

  • Building Materials Testing Services

    Asbestos: Carlson conducts building surveys to identify the location, quantity and condition of asbestos containing materials and recommends abatement and management programs. We also prepare Operations and Maintenance programs to manage asbestos materials in place of removal.

    By Carlson Environmental, Inc. based in Chicago, ILLINOIS (USA).

  • Attic Mold Inspection And Removal Services

    Unfortunately, if you have said yes, you should know that you are not alone. 10% of the requests for mold removal services we receive are related to some type of attic mold problem. Before we discuss a solution it is important to understand and determine what caused the attic mold problem in the first place. There are several common problems that ...

    By Grangeville Environmental Services (GES) based in Hanover, PENNSYLVANIA (USA).

  • Our Documents Process

    Polygon uses a state-of-the-art desiccant air dry distribution system that thoroughly dries hard copy documents and multimedia damaged by water, fire and mold. Our energy saving technology allows us to dry, clean and/or reproduce materials much more efficiently than other drying systems. The system also allows us to provide our customers with real ...

    By Polygon based in North Andover, MASSACHUSETTS (USA). from Our Documents Process Service line

  • Clean Space

    There are only two primary ingredients needed for rot and mold to thrive: one is organic material, like the wood beneath a home, and the second is water. Replacing the wood in a house is practically impossible, so the only avenue to preventing structural damage and those musty smells is to eliminate the moisture.

    By Insurance Restoration Specialists, Inc. based in East Brunswick, NEW JERSEY (USA).

  • Mold Remediation

    Gerken Environmental has been providing mold remediation services for our commercial and industrial clients since 1999. In addition to mold remediation activities, Gerken Environmental provides additional biological services such as pigeon guano removal, bat guano removal, medical clean room remediation and infectious control remediation.

    By Gerken Environmental Enterprises, Inc. based in Springfield, MISSOURI (USA).

  • Plastic Injection Molding Services

    SG Eco Industries Inc. has over 60 Plastic Injection Molding Tools to produce components for their eco friendly products. Some of these components are for the exclusive use in products such as the Sky Tunnel XL2, but others are sold as individual items or used in Original Equipment Manufacturer “OEM” products.

    By SG Eco Industries based in Clark Freeport Zone, PHILIPPINES.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you