Mold Remediation Services For Health And Safety
-
based in USA
Region 8 Enviro LLC provides quality environmental remediation services to a wide customer base throughout the Rocky Mountain area. We specialize in Asbestos Removal, along with Hazardous Material Abatement, Environmental Remediation and Mold Mitigation. We are Licensed, Insured and can provide referrals from our past projects. We are customer service motivated and will provide you with state of ...
-
based in CANADA
Mold testing services include analysis of non-viable air samples (Air-O-Cell, VersaTrap, Micro 5, cyclex D, LARO-100, pcm cassettes), viable air samples (RCS, Andersen, etc), direct microscopic and culture analyses of bulk samples (drywall, wallpaper, pieces of carpets, insulation material, dust, wood and other matrices), tape-lift and swab or wipe ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
Analysis includes a determination of whether spores present are indicative of mold growth or simply a mix of spores coming in from the outside (normal fallout). If mold growth is present, analysis includes identification to genus or group and a qualitative assessment of the amounts present. A general assessment of non-biological debris and other relevant commentary are also ...
-
Manufactured by Alternative Molding Conceptsbased in USA
12 machines ranging from 30 tons to 240 tons. Parts produced range from 0.5 oz to 2lbs. Materials include: Nylon, Polyethylene, Polypropylene, Santoprene, Rubber and more. Available Additives Include: UV, Fire Retardant, Fiberglass, color matching and ...
-
based in USA
Tidewater’s Environmental Safety and Health (ES&H) Services Division has the resources and experience to provide quality, cost-effective solutions for industrial hygiene, occupational safety and health, hazardous materials and staff augmentation services. These services are managed from our Division office in Elkridge, MD, with projects executed through our network of regional offices ...
-
based in USA
There are only two primary ingredients needed for rot and mold to thrive: one is organic material, like the wood beneath a home, and the second is water. Replacing the wood in a house is practically impossible, so the only avenue to preventing structural damage and those musty smells is to eliminate the ...
-
based in USA
Clients with large scale projects that involve complex environmental issues are looking for a single source solution. Alpha Environmental Sciences, Inc. offers turn-key project management services that ensure all environmental issues and regulatory requirements are addressed. Our environmental project management services include asbestos and lead paint abatement, site demolition, mold ...
-
Manufactured by Altek, Inc.based in USA
Painting and EMI/RFI Shielding. Accurate and Efficient Painting: Painting and EMI/RFI shielding are among the most valued secondary services we provide to our customers. Our professional painters are armed with the most advanced equipment needed to perform the comprehensive painting services offered at Altek. Because our painting, printing, injection molding, and machining services are all within ...
-
based in USA
Aberdeen Technologies is often called upon by major defense and aerospace vendors to supply components for sub-assemblies and integrated ...
-
Manufactured by Zhejiang Invitech Precision Technology Co.,Ltd.based in CHINA
Through multi-station transfer mold, we produce deep drawn parts of various non-ferrous metal materials with uniform wall thickness and bright surface. It is more suitable for small batch customization because of the convenience for molds ...
-
based in USA
ECL understands that mold cannot be controlled or remediated in the indoor environment until water intrustion is stopped. Our mold assessment services include helping identifying where the water is coming from and then working with contractors to ensure that it is stopped. Only then will we help get rid of the ...
-
based in USA
HSA has performed enumerable microbiological fungal investigations over the past 20 years. HSA is well experienced in the inspection for fungal colonization of buildings, both commercial and residential. HSA has performed these surveys for building occupants, building lessors, owners and managers, insurance investigations, and as part of construction defect litigation. HSA litigation support has ...
-
Manufactured by DWE, Inc.based in USA
An array of plastic injection molding machines means we can produce a wide variety of parts from prototypes to limited and full-scale production. 33 Injection Molding Machines - 20 to 400-ton for tight-tolerance parts, Climate Controlled, Clean Room Capable, Wide Array Engineering Resins, Overmolding, Decorative Molding, Sealed Insert Molding, Foam Molding, Polyurethane & Silicone ...
-
based in USA
Our Mold Department provides both viable and non-viable analysis supervised by a PhD Microbiologist. We offer turnaround times from 5 days to same-day service, as well as weekend analysis for non-viables. MVOC analysis is also available (see IH Chemistry). We can also create custom reports that are available online or via ...
-
based in CANADA
Occupational and environmental health and safety consultant specializing in building related issues such as LEED indoor air assessments, Designated Substances Reports, asbestos inspections and sampling, asbestos abatement project designs and abatement monitoring, lead paint investigations, mould surveys and remediation, lead paint inspections, indoor air quality, and drinking water testing. We ...
-
based in USA
We are indoor air quality (IAQ) experts with the ability to investigate, test and correct IAQ problems in a wide variety of settings including office buildings, factories, warehouses, hospitals, pharmaceutical complexes, multiple family housing, and apartment complexes. If employees or building occupants are complaining of poor air quality or increased illnesses like colds, flu, asthma, weakness, ...
-
based in USA
As a part of every mold removal is the cause of the mold – water. CCI embraces the philosophy that to remove all mold generation, the moisture must be eliminated at the source. CCI owns drying equipment capable of eliminating moisture from any structure. The right use of desiccant/refrigerant dehumidifiers and air movers will remove moisture from any facility. CCI has the right team able ...
-
Manufactured by NAI Group, LLC.based in USA
With decades of experience manufacturing copper interconnects, we provide a full range of assembly house capabilities, from basic patch cords to complex harness assemblies. Although some may consider us to be a connector house or a connector company, we source copper assembly components, which can include any of hundreds of cables, connector types, as well as a variety of other components, such ...
-
based in USA
Here in New England and throughout the United States we are blessed with some wonderful antique architecture and appointments. As buildings and details age, they require preservation. From the painstaking removal of lead paint to the rebuilding and reinstallation of period-appropriate detailing, EnviroVantage devotes careful attention throughout the restoration process. Our reputation over the ...
-
based in USA
Indoor Air Quality is important in every home and office — wherever we spend time indoors. There are many benefits of good indoor air quality— from the health of our loved ones to the quality of our work environment. Indoor air quality promotes good employee - employer relationships, reduces absenteeism, increases productivity and creates a safe and healthy workplace. IET conducts a complete ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you