Only show results in Virginia? Ok

Mold Testing Services

  • THE BUILT ENVIRONMENT

    We offer Chemical Analysis for the Built Environment where sensitivity is required in understanding the composition and nature of various substances:Anthrax or gypsum in plasterChlorofluorocarbons (CFCs) in foam and polystyreneLead in paint surveysMould analysisPaint layers and thicknessTests for over 30 metals in paint

    By Envirochem Analytical Laboratories LTD based in Fareham, UNITED KINGDOM.

  • Thermal Imaging for Moisture and Water Leakage, Leak Detection Surveys

    Moisture is found in every building, and in every home. If left alone and allowed to accumulate, moisture can lead to various problems such as mold growth and serious structural integrity issues. Moisture is the number one factor that causes buildings to deteriorate, and it is the number one ingredient needed for mold growth. Mold can begin to ...

    By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA). from Infrared Thermography Services Service line

  • Green 3D Shield Environmental Services

    GENS Surface and Air Quality Test (ASQT); Air Quality Test. VOC's evaluation identifies air quality hotspots. Microbial Surface & Air Contamination Test. Comprehensive surface evaluation identifies bacteria and/or mould hotspots. Infrared Thermal Imaging Building Diagnostic Services, Mould Sampling & Analysis.

    By Green Earth Nano Science, Inc. (GENS) based in Toronto, ONTARIO (CANADA).

  • Mold & Bacteria Services

    In recent years, significant publicity has surrounded the detrimental effects of mold and bacteria contamination on human health. According to a study conducted by the Occupational Safety and Health Administration (OSHA), one-third of the 70 million Americans who work indoors do so in buildings that are breeding grounds for an array of ...

    By Airtek Environmental Corp. based in Long Island City, NEW YORK (USA). from Environmental Consulting Services Service line

  • Mould Clearance Testing Services

    Airzone staff has the scientific expertise and experience to provide “court-case-ready” mould assessment studies. Our expertise in mycology, microbiology, air quality sampling, and statistical sampling design allows us to develop and implement scientifically-valid fungal air testing.  In most cases, however, simpler and cheaper ...

    By Airzone One Ltd. based in Mississauga, ONTARIO (CANADA). from IAQ Buildings Service line

  • Bioaerosol Monitoring Services

    A bioaerosol is a biological aerosol. These particles are very small and range in size from less than one micrometer (0.00004') to one hundred micrometers (0.004'). Bioaerosols react to air currents and move quickly or slowly depending on the environment. Bioaerosols are impacted by gravity but due to their size air density and air currents play a ...

    By Odour Monitoring Ireland based in Trim, IRELAND. from Air Quality Services Service line

  • Industrial Hygiene Programs

    Industrial HygieneRecent laws and regulations have fostered an awareness of workplace hazards among employees and the community.

    By Toledo Testing Laboratory Associates, Inc. (TTL) based in Cleveland, OHIO (USA). from Environmental Services Service line

  • Industrial Hygiene Services

    ACER'S Industrial Hygiene services are geared to the evaluation and protection of indoor air quality. ACER'S industrial hygiene Services include asbestos and lead management, mold inspections, site specific indoor air quality (IAQ)investigations,remediation/abatement design, health and safety plans and health and safey monitoring.

    By Acer Associates, LLC based in West Berlin, NEW JERSEY (USA).

  • Mould Assessment & Water Damage Services

    Mould growth within indoor environments can lead to potentially serious health effects in susceptible individuals, such as the young and elderly, as well as immuno-compromised individuals. Conditions conducive to the onset of mould growth should be corrected as soon as possible to avoid potential issues related to building maintenance and occupant ...

    By Enviro Management Inc. based in Toronto, ONTARIO (CANADA).

  • POLYCRETE System Manholes

    POLYCRETE system manholes by MEYER are made of reactive resin moulding material with filler. Neither cement nor water are used. The common name of the material is polymer concrete, also abbreviated as PRC for 'polyester resin concrete'. The material properties and product dimensions are in line with DIN 54815. The moulding material meets the ...

    By meyer-POLYCRETE GmbH - Meyer Rohr & Schacht GmbH based in Lueneburg, GERMANY.

  • Environmental Assessments

    Asbestos, Lead Paint, Mold, Contaminated Soil, Contaminated Groundwater, Hazardous Materials.

    By ET Environmental Corporation based in Atlanta, GEORGIA (US) (USA).

  • Mold Testing

    Mold can be found almost anywhere; it can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem ...

    By Willow Environmental, LLC. based in Sandy Hook, CONNECTICUT (USA).

  • Indoor Air Quality Testing / Mold Services

    Assessment of indoor mold can only be quantified through the use of biological sampling. The goal of biological sampling is to help determine whether the biological particles present in a particular environmental are affecting or causing irritation in certain individuals. Sampling is also used to locate the sources of indoor microorganisms and ...

    By Auburn Environmental Services (AES) based in Hudson, OHIO (USA). from Health & Safety Services Service line

  • Mold Inspection and Testing Services

    EMG provides focused Mold Services designed to identify and evaluate recognized mold conditions, which may represent a threat to human health or the environment. We have built our process around the needs of the industry and the sensitivities of each client’s issues. We continue to evaluate and pioneer new and improved approaches to ...

    By Environmental Management Group (EMG) based in Hunt Valley, MARYLAND (USA).

  • Spore Trap Analysis

    Analysis includes identification to genus or group of all fungi present, quantification to spores/m3, and a general assessment of background debris.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Mold Testing: Air Samples Service line

  • PCR Test: Single Fungal Species

    PCR lab analysis includes detection and quantification of one selected indoor mold by mold-specific quantitative PCR (MSQPCR). Applied methodology has been developed by and is licensed through the EPA. Any PCR assay can be added to the aforementioned panels and custom panels can be created by request. Available assays include Acremonium strictum, ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

  • PCR Test: ERMI Panel

    ERMI is the Environmental Relative Moldiness Index - the combination of EPA research, powerful Polymerase Chain Reaction (PCR) technology, and a new method to screen homes for mold. Based on recently published data from EPA researchers and the 2006 HUD American Healthy Home Survey, the test has been developed as a tool to evaluate the potential ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

  • PCR Test: 15 Important Indoor Molds

    Analysis includes detection and quantification of fifteen important indoor molds by mold-specific quantitative PCR (MSQPCR). Applied methodology has been developed by and is licensed through the EPA. Detection and quantification include Acremonium strictum, Aspergillus fumigatus (A. fumigatus and Neosartorya fischeri), Aspergillus niger (A. niger, ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from PCR Testing Service line

  • USP 797 Testing Services

    Sterile compounding procedures require clean facilities, specific training for operators, air quality evaluations, and a sound knowledge of sterilization and stability principles. USP 797 provides guidelines, procedures and compliance requirements for compounding sterile preparations.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from USP 797 Testing Service line

  • ERMI Testing Services

    ERMI is the Environmental Relative Moldiness Index – the combination of EPA research, powerful PCR technology, and a new method to screen homes for mold. Based on recently published data from EPA researchers and the 2006 HUD American Healthy Home Survey, the test has been developed as a tool to evaluate the potential risk of indoor mold ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from ERMI Testing Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you