Environmental Monitoring System (Noise Monitoring) Equipment
-
Manufactured by Cirrus Research plcbased in UNITED KINGDOM
The CR:465 Galactus instruments are a range of high performance noise monitors that have been designed to integrate with external data loggers and environmental measurement systems and to provide a comprehensive set of acoustic ...
-
Manufactured by Fastwavebased in AUSTRALIA
PAMBuoy is a cutting edge autonomous noise level and marine mammal detection passive acoustic monitoring system. It has been designed to run multiple software detection and monitoring algorithms to reduce data volumes from 80GB to the several megabyte for transmission to shore, whilst being low power enough to handle extended deployment ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
NoiseTutor: Continuous monitoring of environmental data in remote areas has always presented a unique set of challenges. Typical solutions involve complex installations, frequent visits to remote locations to keep the system fully operational and require expert level attention to retrieve and share data amongst customers, consultants and ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Larson Davis has created a new standard for portable noise monitoring by making the SoundAdvisor Portable System Model NMS044 completely wireless with solar charging and 4G wireless while keeping it truly portable. The SoundAdvisor noise monitor includes everything needed for a noise monitor (powered by SoundAdvisor Model 831C ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
In addition to the SoundExpert LxT meter, this kit includes the EPS042 protection case and D-cell battery pack, the EPS2108-2 microphone protection shroud, and EXC010 10 ft. cable. Using D-cell alkaline batteries, allows the noise monitor to be smaller and lighter; avoid the expense of shipping heavy lead acid batteries and the ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Integrated Internet Solution for Remote Noise Monitoring. Continuous monitoring of environmental data in remote areas has always presented a unique set of challenges. Typical solutions involve complex installations, frequent visits to remote locations to keep the system fully operational and require expert level attention to ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
An Integrated Hardware & Software System with Digital Communication and an Open Interface for Long Term Noise Monitoring Applications. The Model 831-NMS permanent noise monitoring system is designed for long term monitoring around airports, industrial facilities, motorsport complexes, wind farms, mining ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The SoundAdvisor Permanent Noise Monitoring System Model NMS045 is available in a variety of configurations to meet your long-term monitoring needs. Model NMS045 shares many of the same benefits as Model NMS044, from 24/7 connectivity to continuous power capabilities, designed to simplify your testing. Now, the key elements of the portable ...
-
Manufactured by Air Spectrum Environmental Limitedbased in UNITED KINGDOM
EnviroGuard is the complete modular and scalable environmental monitoring system Enviroguard provides real-time measurement of site conditions. It’s a highly flexible system that is easily configured to your ...
-
Manufactured by Cirrus Research plcbased in UNITED KINGDOM
The ideal acoustic interface for airport & environmental noise monitoring systems. The CR:465 Galactus noise monitors are a range of high performance noise measurement units that have been designed for integration with external data loggers and environmental noise monitoring ...
-
Manufactured by Opruss LLCbased in USA
Our system is an advanced environmental noise monitoring system with real-time data transmission, generating dynamic noise maps covering areas of interest. The Noise system acquires stores and transmits the noise levels and other meteorological parameters of each location to a Central Station where the data is ...
-
based in UNITED KINGDOM
Aqua Plug provides a low cost alternative to expensive waterproof explosives. Aqua Plug has been developed for use in quarries, surface mine and civil engineering blasting where the blast holes have up to two metres of standing water. Each Aqua Plug is sufficient to treat one borehole up to 200mm in diameter and is completely ...
-
Manufactured by BSWA Technology Co., Ltd.based in CHINA
New BSWA 308/309is new generation octave sound level meter upgrade from base BSWA 308/309. The new types update the dual-core (DSP+ARM) architecture to single chip ARM with FPU, and update all fix-point calculation to float-point which significantly improves the accuracy and stability. Re-design analog front end circuit also lower the noise floor and linear range of product. ...
-
Manufactured by BSWA Technology Co., Ltd.based in CHINA
NEW BSWA 308/NEW BSWA 309 are new generation digital sound level meter upgrade from base BSWA 308/309. The new types update the dual-core (DSP+ARM) architecture to single chip ARM with FPU, and update all fix-point calculation to float-point which significantly improves the accuracy and stability. Re-design analog front end circuit also lower the noise floor of sound level ...
-
based in UNITED KINGDOM
Dust monitoring is essential for the control of pollution and compliance with legislation. Vibrock can supply and install the following which are available for purchase or hire. Frisbee Dust Gauges. Horizontal Sticky Pad Samplers. Combined Directional and Deposited Dust Samplers. Personal Dust Pumps. PM10 monitors. Sample analysis of Frisbee ...
-
Manufactured by dBelectronicsbased in SPAIN
The dBnoise Monitoring Station is a device created to take permanent or temporary noise measurements outdoors. Thanks to its small size, it’s perfectly designed for use in any type of climate conditions, as well as in industrial, urban and open field ...
-
Manufactured by Hangzhou Crysound Electronics Co., Ltd.based in CHINA
CRY2851 Sound Level Meter is designed for noise measurement, environmental and industrial product measurement. With high-performance processor, CRY2851 has ability to do frequency analysis, data logging, wireless control and transmission accurately and reliably. CRY2851 Sound Level Meter follows GB/T3785.1-2010 Class 1, IEC61672-1: 2013 Class ...
-
Manufactured by Scarlet Tech Ltd.based in TAIWAN
Scarlet ST-25D integrates professional class-2 sound level monitoring that complies with IEC and ANSI standards. It is equipped with the integration function for detailed sound analysis. Measure sound level and identify noise source with one ...
-
based in UNITED KINGDOM
Vibrock works with one of the UK's leading manufacturers of sound level meters to supply clients with a range of high performance noise monitors that provide the functions and features demanded by modern measurement standards and guidelines while being designed specifically for ease of use. From Noise at Work Risk Assessments to ...
-
Manufactured by Far Data Ltdbased in POLAND
An ENVIRO 151 station is used for continuous and long term registration of noise levels, vehicle traffic intensity, and environmental conditions: temperature, air humidity, atmospheric pressure, wind speed and direction, and precipitation. It makes it possible to install air quality measurement modules. The station may also serve as a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you