Noise Pollution Equipment

693 Results found
Only show results in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Noise Pollution ×

Sound Attenuators

by Colchester Engineering Systems     based in Colchester, UNITED KINGDOM

The standard range of rectangular splitter type sound attenuators/silencers have been developed to give virtually any attenuation required in normal practice, in any air handling situation. They are designed for use in industrial ventilation systems, where axial or centrifugal fan noise must be reduced. They are also ideally suited for use as ...

Trox - Model MSA - Splitter Sound Attenuators

by TROX Deutschland GmbH     based in Neukirchen-Vluyn, GERMANY

Splitter sound attenuators with integral splitters with resonating panels, suitable for air conditioning systems: Attenuation effect due to resonance and absorption. Energy efficient due to aerodynamically profiled frame (radius > 15 mm). Acoustic data measured to ISO 7235. Absorption material is biosoluble and hence hygienically safe. ...

Acusticab - Model SA - Airborne Sound Absorption

by Sontech International AB     based in Kungsängen, SWEDEN

Acusticab SA is a sound absorbing material of foamed polyurethane with open cells. The product is based on Acusticell SA but its surface is embossed and covered with an elastic film of urethane. The material can be bent and is self-adhesive. Can be combined with a mat for structure-borne sound damping and airborne sound insulation.

Acusticell - Model Combi - Airborne Sound Insulation

by Sontech International AB     based in Kungsängen, SWEDEN

Acusticell Combi is a product for combined sound insulation and sound absorption. It has a barrier mat on a soft foam distance and a sound foamed polyurethane covered with an elastic film if urethane. It is preferable used for insulation of boat and vehicle engine rooms.

Acusticell - Model S NF - Airborne Sound Absorption

by Sontech International AB     based in Kungsängen, SWEDEN

Acusticell S NF is a sound absorbing material of foamed polyurethane with open cells and a strong needle felted surface. The material can be bent and is self-adhesive. Can be combined with a mat for structure-borne sound damping and airborne sound insulation.

Industrial Blow Off Silencer / Vent Silencer

by E.I.Williams Industries     based in Ajax, ONTARIO (CANADA)

In cases of blow off silencers regarding highly compressed vapour or gas in an open air set, kinetic energy is formed with high amplitude pressure fluctuations. The result of this is a very high sound pressure level that needs to be reduced. It is this type of emission that can effectively be limited with a blow off silencer, vent silencer, ...

PCE - Model 322 A - Noise Meter

by PCE Instruments UK Ltd     based in Southampton, UNITED KINGDOM

Our professional PCE-322 A noise meter is suitable for taking measurements in the industrial sector, health and safety sectors, and to control internal environments such as those with noise contamination. The noise meter internal memory of 32,000 values makes it possible to be used for long periods of time and to save data. The data of the noise ...

Model AEK-2002 - Acoustic Enclosure

by Herzan LLC     based in Laguna Hills, CALIFORNIA (USA)

Herzan's Most Popular SPM Enclosure! The AEK-2002 is Herzan's best selling acoustic enclosure to date, supplying AFM manufacturers and users with the perfect combination of high quality design and high performance acoustic isolation. With numerous premium features that come standard with every AEK-2002, additional customizable options can be ...

Acusticell - Model S TE - Airborne Sound Absorption

by Sontech International AB     based in Kungsängen, SWEDEN

Acusticell S TE is a sound absorbing material of foamed polyurethane with open cells. The product is based on Acusticell S but its surface is covered with a velour textile. The material can be bent and is self-adhesive. Can be combined with a mat for structure-borne sound damping and airborne sound insulation.

Chelsea Technologies - UviLux Fluorometer

by Fastwave     based in Subiaco, AUSTRALIA

The UviLux is a family of sensitive, low cost, digital in-situ UV fluorometers designed for real-time monitoring of concentrations of refined amp; crude hydrocarbons, Coloured Dissolved Organic Matter (CDOM) and Tryptophan, a surrogate marker for Biological Oxygen Demand (BOD), optical brighteners and bacterial contamination in waste, recycled and ...

Vac-Con - Centrifugal Compressor Quiet Package

by Vac-Con, Inc.     based in Green Cove Springs, FLORIDA (USA)

The Centrifugal Compressor Quiet Package is available for 2 or 3 stage Vac-Con Fan Compressors. The Centrifugal Compressor Quiet Package can be retrofitted to any Vac-Con Fan compressor by simply removing the existing outlet diffuser and installing the Centrifugal Compressor Quiet Package using the same hardware.

High Pressure Backward Curved Fans

by The New York Blower Company     based in Willowbrook, ILLINOIS (USA)

New York Blower High-Efficiency High Pressure Backward Curved fans feature a backward-curved wheel designed for clean-air applications, but is still capable of handling light particle-laden or moist airstreams. Air-handling efficiencies of the HP Backward-Curved Fan are higher than common radial fans and, therefore, offer lower noise levels.

Sound Absorber

by Colasit     based in Spiez, SWITZERLAND

Sound-proofing enclosure with casing made of approx. 1.2 mm thick, sendzimir-galvanised steel sheeting. Self-supporting frame made from aluminium profile with a closely-fitting edge-protection seal. Non-imflammable mineral wool filling covered with perforated steel sheeting. Removable side panels. Wall thickness 45mm. Convection cooling or forced ...

Model SV 104IS - Noise Dosimeter

by Svantek Ltd.     based in Warszawa, POLAND

The SV 104IS is the intrinsically safe version of the revolutionary personal noise dosimeter, the SV 104. Both instruments offer a new approach to occupational health and safety noise monitoring presenting features such as 1/1 octave band real-time analysis and audio events recording functions which are a new quality in an instrument of this size. ...

Troy Board - Non-structural Acoustical Sound Boards

by Troy Acoustics Corporation     based in Brunswick, GEORGIA (US) (USA)

Troy Board non-structural acoustical boards are rugged, strong and waterproof.  The fire rating from Underwriter Laboratories is zero smoke development and zero flame spread.  The Troy Board  material will not support combustion. The natural organic components that make up the Troy Board material are impregnable to the exterior ...

Industrial Silencers

by York Metal Products     based in Concord, ONTARIO (CANADA)

Complete Design Capabilities: The York Metal engineering team will design or help you design the optimum product you need for your application.  If you can provide us with a few simple details, we can come back with a product that meets or exceeds your requirements at a lower cost in most cases than you would get from traditional suppliers.

Model CIB - Circular Discharge Silencer

by VAW Systems Ltd.     based in Winnipeg, MANITOBA (CANADA)

All of our standard and custom silencers are available in any construction gauge and material to meet the most demanding application. Our application engineers review all selections to ensure the best available solution is applied to meet your needs.

Cirrus - Model MK 427 - Environmental Permanent Noise Sensor Outdoor Microphone

by Cirrus Environmental     based in Peterborough, UNITED KINGDOM

External Noise Sensor with 4-20mA Output for a range of noise monitoring applications. Integrated noise measurement outdoor noise microphone with a 4-20mA current loop. Unlike a conventional Sound Level Meter, the Noise Sensor simply converts the noise level in decibels into an industry standard 4-20mA output.

Rail Noise & Vibration Assessments

by Sound Planning Limited     based in Farnham, UNITED KINGDOM

Sound Planning conducts vibration assessments using tri-axial accelerometers; measuring vibration levels against relevant British Standards:BS 6472 - Human response to vibrationBS 7385 - Building response to vibrationEquipment assesses vibration levels in one third octave bands (or narrow band if required) in order to accurately assess problem ...


Norsonic - Model Nor137 - Vehicle Noise Meter

by Norsonic AS     based in Lierskogen, NORWAY

The Nor137 Vehicle Noise Meter is specially designed for in-the-field stationary vehicle noise test measurements in accordance with ISO 5130 or similar national standards. For use in connection with an external rpm detector unit.

Need help finding the right suppliers?

Let the XPRTs do the work for you