OHS Monitoring Equipment For Health And Safety Available In Zimbabwe
-
PremiumManufactured by USA Borescopesbased in USA
USAVS J-4-1500 Slim 3.9mm diameter joystick controlled articulating videoscope with responsive cable guided controls. The precision-made bending section of the economy joystick allows for smooth and precision manipulation of the tip of the probe to obtain a full view of the borescope inspection area. The borescope probe is steel braided and flexible. Still photos and videos are captured with just ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
In paint booth systems, different body and spare parts from automotive, appliance, electronics, plastics and other industries are coated by using one or multiple layers of paints. The main goal of the paint booth treatment is to remove as much overspray paint as possible for successful operations. Our Kuristuck technology meets this requirement by removing the overspray as dry sludge and it goes ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
LiQuilaz II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.1 - 1.0 μm. The High Sensitivity Liquid in Situ (HSLIS-M100e) Chemical Particle Counter provides continuous, real-time particle monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF), and is included in Particle Measuring Systems’ (PMS®) complete line of liquid particle counters. Particle Measuring Systems’ HSLIS Liquid ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The BAB air monitoring beacon is used in nuclear facilities for a continuous surveillance of alpha; & beta artificial radioactive aerosols concentration with radon progenies and ambient gamma ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-30L-BL-Li is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) line power, an on-board Li-ion battery or (2) an external 12VDC source such as solar ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The AGM-02 gamma area monitor is used to monitor gamma dose rate in a room. It can be used as either an independent radiation monitor or can be integrated into a system that monitors the radiation in several rooms of a building from a central location. It is a cost-effective solution that consists of a Geiger-Müeller tube detector and integrated display. It measures the exposure rate, ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The UltraChem® 40 Liquid Particle Counter gives you reliable contamination monitoring with the ability to detect 40 nm particles. If your application requires measuring small particles in chemicals with high molecular scatter, the UltraChem Liquid Particle Counter is the best tool for the job. NanoVision Technology eliminates the competition between the light scattered by fluid molecules and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
ProSpector 3 is the next-generation handheld XRF analyzer. It offers a new level of analysis accuracy, speed, and detection limits. ProSpector 3 is the smallest and lightest handheld XRF on the market with an intuitive and user-friendly software interface. Unique processing algorithms allow analyzing various types of materials including alloys, ores, soils, plastics, automotive catalysts ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Wavelength Range: 360-780nm. High configuration of hardware. Double Array 256 Image Element CMOS Sensor. Built-in temperature sensor. Multiple measurement ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
ENVI BioScout provides a robust and sensitive bioaerosol detection solution that continuously monitors and warns for the presence of harmful airborne biological particles like bacterial, viral, rickettsial agents and toxins and collects air samples for further BWA analysis at the time of a biological alarm. ENVI Bioscout bioaerosol detector is designed to operate as an integral part of fixed or ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The UVP Incubator provides precise temperature control and uniformity for the incubation of biological assays, fungal, bacterial cultures, eggs and other samples up to 68 °C. The instrument is equipped with built-in overhead shortwave 254nm UV tubes for sterilization of the incubation chamber between experiments. By utilizing the germicidal properties of UV light eliminating viable fungi, ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Application area: The flexible detector is used on round vessels and vessels with conical outlet and is suitable for measurement of liquids, solids, slurries and suspensions. Due to its thin, flexible scintillator cross-section, FIBERTRAC 31 can be easily adapted to round vessels. The FIBERTRAC 31 is a radiation-based sensor with flexible plastic sensing element for continuous measurement of ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
SpectroTRACER is a continuous operating measurement system for nuclide specific detection of even lowest level gamma contamination in air (SpectroTRACER-Air/Soil) and in liquids (SpectroTRACER-Aqua). The probe performs spectroscopic analysis of the measurement in order to identify the detected radionuclides. SpectroTRACER is used for radiation monitoring when a standard gamma dose rate monitor is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
VF’s line of Hand/Foot Contamination Monitors is used to measure the alpha, beta, and gamma contamination on hands and feet. Different types and thicknesses of smart scintillation detectors are used to determine the type of radiation measured and the efficiency of the detectors. Using dual phosphors, the discrimination of alpha from beta activity is ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
For batch sampling applications using Chem 20 and Chem 20-HI particle counters. The SLS-20 Syringe Liquid Particle Sampler enables Particle Measuring Systems’ Chem 20 or Chem 20-HI particle counters to operate in batch sampling applications. It is ideal for precise, small-volume sampling. The system consists of an SLS-20 for either corrosive or non-corrosive liquids, all connections ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS SBM2D probe may be used with the Digital Canberra MIP10. The Probe has a standard 16 pin fischer connector that plugs directly into the probe port on the instrument. The SBM-2D probe is powered by the instrument and does not require batteries. The probe is automatically turned on when the probe is connected to the meter and the meter is powered on. It is required that the Meter is plugged ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you